1975 Jensen Interceptor Engine Parts

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts for the 1975 Jensen Interceptor come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99218 and WJB / INMOTION PARTS WS99218.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 1975 Jensen Interceptor come from 5 brands — NATIONAL, BCA, MAHLE / CLEVITE and 2 other brands. The "Popular" part is NATIONAL 3103.

Listed part numbers: NATIONAL 3103, BCA NS3103 and MAHLE / CLEVITE JV604, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts are listed for the 1975 Jensen Interceptor, from MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE 3464VC and VICTOR REINZ 611033200.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 1975 Jensen Interceptor, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE HS3464VC and VICTOR REINZ 021032301.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 1975 Jensen Interceptor — MAHLE / CLEVITE 55153.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 1975 Jensen Interceptor, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 953344 and VICTOR REINZ 011002401.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 1975 Jensen Interceptor — ENGINE PRO PB1112ST.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 1975 Jensen Interceptor, from VICTOR REINZ and MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE MS15914, VICTOR REINZ 111000501 and VICTOR REINZ 101004001.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1975 Jensen Interceptor, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 1975 Jensen Interceptor come from 11 brands — WIX, CHAMP / LUBER-FINER, FVP and 8 other brands. The "Popular" part is WIX 51515XP.

The Economy section lists 5 options from CHAMP / LUBER-FINER, FVP, PRO-TEC and 2 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH8A is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51515XP is listed in this group.

In the Standard Replacement grade, ACDELCO, WIX, BOSCH and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO PFL400A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 1975 Jensen Interceptor come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE OS31416, MAHLE / CLEVITE OS31416TC and VICTOR REINZ 101018801 and the remaining parts above.

This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1975 Jensen Interceptor — VICTOR REINZ 711456300.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1975 Jensen Interceptor — MAHLE / CLEVITE B45558.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 1975 Jensen Interceptor come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE T18750, MAHLE / CLEVITE JV834 and VICTOR REINZ 151025001.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 64573.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 1975 Jensen Interceptor come from 2 brands — VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE VS38322.

This group includes MAHLE / CLEVITE VS38322, MAHLE / CLEVITE VS38322H and VICTOR REINZ 151052101 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 1975 Jensen Interceptor come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE SS45623, MAHLE / CLEVITE SS45343 and MAHLE / CLEVITE SS45403.