This page lists 16 ignition parts for the 1972 Jensen Interceptor, across 3 part types, covering both the 6.3L V8 and the 7.2L V8. Every part shows its brand, manufacturer part number and fitment notes.
On the 1972 Jensen Interceptor, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 16 listed parts are Spark Plug (7 parts), Ignition Coil (6 parts) and Distributor Mounting Gasket (3 parts).
The 1972 Jensen Interceptor was sold with both the 6.3L V8 and the 7.2L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
10 brands supply ignition parts for the 1972 Jensen Interceptor, led by ACDELCO (4 parts), STANDARD MOTOR PRODUCTS (2 parts) and CHAMPION (2 parts), plus 7 more brands. Quality grades include Copper / Nickel, Economy and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1972 Jensen Interceptor. 4 parts have it, including ACDELCO U505 (Ignition Coil) and ACDELCO R43S (Spark Plug). Each part number opens a page with every vehicle that part fits.
Distributor Mounting Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 7.2L V8 | 6464 | 🇺🇸 US 🇨🇦 CA | Distributor mounting gasket and Distributor shaft seal included | View on Amazon |
| MAHLE / CLEVITE Fits: 7.2L V8 | B17926 | 🇺🇸 US 🇨🇦 CA | Distributor GasketRubber | View on Amazon |
| VICTOR REINZ Fits: 7.2L V8 | 711387200 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Distributor Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Distributor Mounting Gasket parts are listed for the 1972 Jensen Interceptor, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO 6464, MAHLE / CLEVITE B17926 and VICTOR REINZ 711387200.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 7.2L V8 | UC12F | 🇺🇸 US 🇨🇦 CA | with 12 Volt Systemwith External Resistor | View on Amazon |
| SKP Fits: 7.2L V8 | SKUC12 | 🇺🇸 US 🇨🇦 CA | with 12 Volt Systemfor with External Resistor. | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 7.2L V8 | UC12T | 🇺🇸 US 🇨🇦 CA | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 7.2L V8 | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| WELLS Popular Fits: 7.2L V8 | 5C1026 | 🇺🇸 US 🇨🇦 CA | Requires External Resistor: YES | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 7.2L V8 | UC12 | 🇺🇸 US 🇨🇦 CA | with 12 Volt Systemwith External Resistor | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts for the 1972 Jensen Interceptor come from 5 brands — STANDARD MOTOR PRODUCTS, FVP, SKP and 2 other brands. The "Popular" part is ACDELCO U505.
The Economy section lists 3 options from FVP, SKP and STANDARD MOTOR PRODUCTS — the catalog's value-priced group. FVP UC12F is listed in this group.
In the Standard Replacement grade, ACDELCO, WELLS and STANDARD MOTOR PRODUCTS supply 3 parts: built to original-equipment specification. A representative part number is ACDELCO U505.
Part numbers include ACDELCO U505, FVP UC12F and SKP SKUC12, among others listed above.
Spark Plug
Summary: Notes include pre-set gaps of 0.035" and 0.040". Replacement brands in this table include ACDELCO, CHAMPION and NGK.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 7.2L V8 | R43S | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Popular Fits: 7.2L V8 | 14 | 🇺🇸 US 🇨🇦 CA | Copper PlusPre-Set Gap: 0.035" | View on Amazon |
| CHAMPION Fits: 7.2L V8 | 10 | 🇺🇸 US 🇨🇦 CA | Copper PlusPre-Set Gap: 0.035" | View on Amazon |
| NGK Fits: 7.2L V8 | 3332 | 🇺🇸 US 🇨🇦 CA | V-PowerStock Number: 3332 | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 7.2L V8 | 41833 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Fits: 7.2L V8 | 7355 | 🇺🇸 US 🇨🇦 CA | Iridium IXPre-Set Gap: 0.040" | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 7.2L V8 | 7 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
7 Spark Plug parts are listed for the 1972 Jensen Interceptor, from ACDELCO, CHAMPION and NGK. ACDELCO R43S carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION, ACDELCO and NGK supply 4 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R43S.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41833.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 1 option from NGK — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 7355 is listed in this group.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 7.
Part numbers include ACDELCO R43S, CHAMPION 14 and CHAMPION 10, among others listed above.
Buying Ignition Parts for a 1972 Jensen Interceptor
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1972 Jensen Interceptor?
Our catalog currently lists 16 ignition parts for the 1972 Jensen Interceptor across 3 subcategories and 10 brands, covering both the 6.3L V8 and the 7.2L V8. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1972 Jensen Interceptor engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1972 Jensen Interceptor?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1972 Jensen Interceptor?
Notes on this page include pre-set gaps of 0.035" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1972 Jensen Interceptor was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1972 Jensen Interceptor?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1972 Jensen Interceptor
Ignition Parts for Other Jensen Interceptor Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.