1974 Jensen Interceptor Ignition Parts

Engine:
7.2L V8

This page lists 24 ignition parts for the 1974 Jensen Interceptor, across 6 part types, covering the 7.2L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1974 Jensen Interceptor, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 20 parts of the 24 listed are Ignition Coil (10 parts), Spark Plug (7 parts) and Distributor Mounting Gasket (3 parts). The other 3 part types cover the remaining 4 parts.

Condenser / Capacitor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU206T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU206
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Cap

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU429
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Distributor Mounting Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 6464
🇺🇸 US 🇨🇦 CA
Distributor mounting gasket and Distributor shaft seal included
View on
Amazon
MAHLE / CLEVITE B17926
🇺🇸 US 🇨🇦 CA
Distributor GasketRubber
View on
Amazon
VICTOR REINZ 711387200
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the gaskets that seal the Distributor Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Ignition Breaker Points

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS LU1617P
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP UC15F
🇺🇸 US 🇨🇦 CA
Alternate Replacement Part
View on
Amazon
HOLSTEIN 2IGC0058
🇺🇸 US 🇨🇦 CA
View on
Amazon
SKP SKUF3T
🇺🇸 US 🇨🇦 CA
Coil Pack
View on
Amazon
SPECTRA PREMIUM C654
🇺🇸 US 🇨🇦 CA
Pack
View on
Amazon
STANDARD MOTOR PRODUCTS UC15T
🇺🇸 US 🇨🇦 CA
T-Series
View on
Amazon
WAI GLOBAL CUF3
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular U505
🇺🇸 US 🇨🇦 CA
Professional
View on
Amazon
WELLS Popular 5C1026
🇺🇸 US 🇨🇦 CA
Requires External Resistor: YES
View on
Amazon
STANDARD MOTOR PRODUCTS UC15
🇺🇸 US 🇨🇦 CA
View on
Amazon
UNITED MOTOR PRODUCTS C15
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.035" and 0.040". Replacement brands in this table include ACDELCO, CHAMPION and NGK.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular R43S
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R43S
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .035
View on
Amazon
CHAMPION Popular 14
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 14
Copper PlusPre-Set Gap: 0.035"
Resistor TypeOE-Recommended Gap: 0.035"
View on
Amazon
CHAMPION 10
🇺🇸 US 🇨🇦 CA
Copper PlusPre-Set Gap: 0.035"
Fitment notes — CHAMPION 10
Copper PlusPre-Set Gap: 0.035"
Non-Resistor TypeOE TypeOE-Recommended Gap: 0.035"
View on
Amazon
NGK 3332
🇺🇸 US 🇨🇦 CA
V-PowerStock Number: 3332
Fitment notes — NGK 3332
V-PowerStock Number: 3332Pre-Set Gap: 0.040"
OE-Recommended Gap: 0.035 IN
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 41833
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41833
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.035" (IN)
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
NGK 7355
🇺🇸 US 🇨🇦 CA
Iridium IXPre-Set Gap: 0.040"
Fitment notes — NGK 7355
Iridium IXPre-Set Gap: 0.040"
OE-Recommended Gap: 0.035 IN
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO 7
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 7
ProfessionalRapidfirePre-Set Gap: 0.035"
OE-Recommended Gap: 0.035" (IN)
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1974 Jensen Interceptor

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Confirm you have the 7.2L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Ignition Coil and Spark Plug .

Frequently Asked Questions

How many ignition parts fit the 1974 Jensen Interceptor?

Our catalog currently lists 24 ignition parts for the 1974 Jensen Interceptor across 6 subcategories and 14 brands, covering the 7.2L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of ignition problems on a 1974 Jensen Interceptor?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1974 Jensen Interceptor?

Notes on this page include pre-set gaps of 0.035" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1974 Jensen Interceptor was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1974 Jensen Interceptor?

Every part on this page is matched to the 7.2L V8 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1974 Jensen Interceptor

Ignition Parts for Other Jensen Interceptor Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.