This page lists 32 automatic transmission parts for the 1974 Jensen Interceptor, across 12 part types, covering the 7.2L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.
The automatic transmission on the 1974 Jensen Interceptor covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts. The largest groups are Extension Housing Seal (5 parts), Filter (5 parts) and Clutch Pack Piston Dam / Seal (4 parts). The other 9 part types cover the remaining 18 parts.
Every part on this page is matched to the 7.2L V8 — the only engine offered in the 1974 Jensen Interceptor.
The most listed brands for 1974 Jensen Interceptor automatic transmission parts are ATP (14 parts), PIONEER (9 parts) and WJB / INMOTION PARTS (3 parts), plus 5 more brands. Quality grades include Standard Replacement and Economy.
2 parts on this 1974 Jensen Interceptor page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including NATIONAL 7300S (Extension Housing Seal) and ATP TF42 (Filter). Click any part number to see every vehicle that part fits.
Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TB18 | 🇺🇸 US 🇨🇦 CA | Input Shaft - GAS | View on Amazon |
| PIONEER | 755106 | 🇺🇸 US 🇨🇦 CA | Input Shaft | View on Amazon |
This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
2 Bushing parts for the 1974 Jensen Interceptor come from 2 brands — ATP and PIONEER.
Part numbers include ATP TB18 and PIONEER 755106.
Bushing Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TBS2 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Bushing kits.
This group shows a single part: ATP TBS2.
Clutch Pack Piston Dam / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TO18 | 🇺🇸 US 🇨🇦 CA | Rear Clutch Piston Set | View on Amazon |
| ATP | TO22 | 🇺🇸 US 🇨🇦 CA | Front Clutch Piston Set | View on Amazon |
| PIONEER | 758013 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| PIONEER | 758017 | 🇺🇸 US 🇨🇦 CA | Lip SealRear Clutch Piston Set | View on Amazon |
This table covers the seals at the Clutch Pack Piston Dam. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Clutch Pack Piston Dam / Seal parts are listed for the 1974 Jensen Interceptor, from ATP and PIONEER.
Part numbers include ATP TO18, ATP TO22 and PIONEER 758013, among others listed above.
Extension Housing Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TB15 | 🇺🇸 US 🇨🇦 CA | BRASS | View on Amazon |
| PIONEER | 755014 | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
2 Extension Housing Bushing parts for the 1974 Jensen Interceptor come from 2 brands — ATP and PIONEER.
Listed part numbers: ATP TB15 and PIONEER 755014.
Extension Housing Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TG15 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER | 749052 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Extension Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Extension Housing Gasket parts are listed for the 1974 Jensen Interceptor, from ATP and PIONEER.
Part numbers include ATP TG15 and PIONEER 749052.
Extension Housing Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 7300S | 🇺🇸 US 🇨🇦 CA | Long Boot Style1.250 IN Width | View on Amazon |
| ATP | HO8 | 🇺🇸 US 🇨🇦 CA | with Long ExtensionMore Than 133" WB | View on Amazon |
| PIONEER | 759020 | 🇺🇸 US 🇨🇦 CA | with Long ExtensionMore Than 133" WB | View on Amazon |
| WJB / INMOTION PARTS | WS7300S | 🇺🇸 US 🇨🇦 CA | Long Boot Stylewith 3-Speed Chrysler A727 Transmission | View on Amazon |
| WJB / INMOTION PARTS | WS5206 | 🇺🇸 US 🇨🇦 CA | Width (In): 0.42099999999999999 In | View on Amazon |
This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Extension Housing Seal parts are listed for the 1974 Jensen Interceptor, from WJB / INMOTION PARTS, NATIONAL, ATP and 1 other brand. NATIONAL 7300S carries the "Popular" badge.
Listed part numbers: NATIONAL 7300S, ATP HO8 and PIONEER 759020, plus the other parts above.
Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Popular | TF42 | 🇺🇸 US 🇨🇦 CA | OE ReplacementFelt-Covered Filter | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | JX150 | 🇺🇸 US 🇨🇦 CA | In-Line Filter KitIncludes: (2) Hoses, (4) Clamps | View on Amazon |
| ATP | JX151 | 🇺🇸 US 🇨🇦 CA | In-Line Filter KitInline Cooler Filter | View on Amazon |
| ATP | IL150 | 🇺🇸 US 🇨🇦 CA | In-Line Filter KitInline Cooler Filter | View on Amazon |
| PIONEER | 745119 | 🇺🇸 US 🇨🇦 CA | Inline Cooler FilterIn-Line Filter Kit | View on Amazon |
This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
5 Filter parts for the 1974 Jensen Interceptor come from 2 brands — ATP and PIONEER. The "Popular" part is ATP TF42.
The Economy section lists 1 option from ATP — the catalog's value-priced group. ATP TF42 is listed in this group.
In the Standard Replacement grade, ATP and PIONEER supply 4 parts: built to original-equipment specification. A representative part number is ATP JX150.
Part numbers include ATP TF42, ATP JX150 and ATP JX151, among others listed above.
Flexplate Mounting Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARP | 2002903 | 🇺🇸 US 🇨🇦 CA | 7/16 flexplate bolt kit | View on Amazon |
This table covers the Flexplate Mounting bolts.
One part is listed for the 1974 Jensen Interceptor — ARP 2002903.
Fluid Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | 103019 | 🇺🇸 US 🇨🇦 CA | With drain plug. | View on Amazon |
This table covers the pans that hold automatic-transmission fluid.
One part is listed for the 1974 Jensen Interceptor — ATP 103019.
Fluid Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TG10 | 🇺🇸 US 🇨🇦 CA | Replacement GasketAftermarket Style | View on Amazon |
| FEL-PRO | TOS18583 | 🇺🇸 US 🇨🇦 CA | Chrysler A727 Automatic Transmission3 Speed | View on Amazon |
| PIONEER | 749029 | 🇺🇸 US 🇨🇦 CA | Fiber | View on Amazon |
| VICTOR REINZ | 711493500 | 🇺🇸 US 🇨🇦 CA | Trans. code A72714 Bolt | View on Amazon |
This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Fluid Pan Gasket parts for the 1974 Jensen Interceptor come from 4 brands — ATP, FEL-PRO, PIONEER and 1 other brand.
Part numbers include ATP TG10, FEL-PRO TOS18583 and PIONEER 749029, among others listed above.
Fluid Pump O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | TO7 | 🇺🇸 US 🇨🇦 CA | LCS - Extension Housing To Case | View on Amazon |
| PIONEER | 760017 | 🇺🇸 US 🇨🇦 CA | LCSextension housing to case | View on Amazon |
This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
2 Fluid Pump O-Ring parts for the 1974 Jensen Interceptor come from 2 brands — ATP and PIONEER.
This group includes ATP TO7 and PIONEER 760017.
Fluid Pump Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS88187 | 🇺🇸 US 🇨🇦 CA | Frontwith A727 Transmission Code | View on Amazon |
| NATIONAL | 99187 | 🇺🇸 US 🇨🇦 CA | with 3-Speed Chrysler A727 Transmission | View on Amazon |
| WJB / INMOTION PARTS | WS99187 | 🇺🇸 US 🇨🇦 CA | Frontwith 3-Speed Chrysler A727 Transmission | View on Amazon |
This table covers the precision wear sleeves used to restore a transmission pump seal surface.
3 Fluid Pump Repair Sleeve parts are listed for the 1974 Jensen Interceptor, from BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.
Buying Automatic Transmission Parts for a 1974 Jensen Interceptor
On this vehicle, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts.
- Confirm you have the 7.2L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Extension Housing Seal and Filter .
Frequently Asked Questions
How many automatic transmission parts fit the 1974 Jensen Interceptor?
Our catalog currently lists 32 automatic transmission parts for the 1974 Jensen Interceptor across 12 subcategories and 8 brands, covering the 7.2L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of automatic transmission problems on a 1974 Jensen Interceptor?
Common symptoms include delayed or harsh engagement, slipping under load, fluid that smells burnt, or shuddering at light throttle around 40 mph. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1974 Jensen Interceptor was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1974 Jensen Interceptor?
Every part on this page is matched to the 7.2L V8 engine. Then use exactly the fluid specification in the notes — automatic transmissions are the least forgiving component on the vehicle about fluid choice. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1974 Jensen Interceptor
Automatic Transmission Parts for Other Jensen Interceptor Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.