2008 Kia RIO5 Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2008 Kia RIO5 — HYUNDAI 2420026704.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Camshaft Plug parts are listed for the 2008 Kia RIO5, from FEL-PRO, HYUNDAI, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: FEL-PRO CP75023, HYUNDAI 2232735504 and MAHLE / CLEVITE 67728, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts for the 2008 Kia RIO5 come from 6 brands — NATIONAL, SKF, BCA and 3 other brands. The "Popular" part is NATIONAL 99139.

Listed part numbers: NATIONAL 99139 and BCA NS99139, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts for the 2008 Kia RIO5 come from 12 brands — NATIONAL, SKF, TIMKEN and 9 other brands. The "Popular" part is NATIONAL 3771.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: APEX ACP203.

This table covers the connecting rods between each piston and the crankshaft. Read more

One part is listed for the 2008 Kia RIO5 — TOPLINE CRHY2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2008 Kia RIO5, from ITM ENGINE COMPONENTS, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

This group includes ITM ENGINE COMPONENTS 4B9643, KING ENGINE BEARINGS CR4655AM and MAHLE / CLEVITE CB1979A4 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts are listed for the 2008 Kia RIO5, from FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. FEL-PRO CS262241 carries the "Popular" badge.

Listed part numbers: FEL-PRO CS262241, ITM ENGINE COMPONENTS 0921905 and AJUSA 54130100, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2008 Kia RIO5 come from 4 brands — AUTO 7, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ITM ENGINE COMPONENTS 5M9516.

Listed part numbers: ITM ENGINE COMPONENTS 5M9516, AUTO 7 6000263 and AUTO 7 6000266, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2008 Kia RIO5 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts for the 2008 Kia RIO5 come from 10 brands — VICTOR REINZ, FEL-PRO, APEX and 7 other brands. The "Popular" part is FEL-PRO BS40672.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2008 Kia RIO5, from AJUSA, ENGINETECH, APEX and 6 other brands. AJUSA 81029900 carries the "Popular" badge.

Listed part numbers: AJUSA 81029900, ENGINETECH HB251 and APEX AHB240, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 2008 Kia RIO5, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 4 other brands. FEL-PRO 26224PT carries the "Popular" badge.

Part numbers include FEL-PRO 26224PT, MAHLE / CLEVITE 54484 and AJUSA 10183100, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts are listed for the 2008 Kia RIO5, from ENGINETECH, FEL-PRO, AJUSA and 7 other brands. ENGINETECH HY16HSB carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2008 Kia RIO5 — SBI 2302190.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11485.

This table covers the Engine covers. Read more

TECHPRO supplies both parts for the 2008 Kia RIO5.

Listed part numbers: TECHPRO KI1228107 and TECHPRO KI1228108.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts for the 2008 Kia RIO5 come from 7 brands — HYUNDAI, ITM ENGINE COMPONENTS, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221226050.

This group includes HYUNDAI 2221226050, ITM ENGINE COMPONENTS RX9642 and ENGINETECH EM4421 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2008 Kia RIO5 — TOPLINE EPSC11.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 2008 Kia RIO5, from SKP, HL MANDO, ATP and 3 other brands. SKP SK594053 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594053.

The Standard Replacement section lists 5 options from HL MANDO, ATP, DAYCO and 2 other brands — built to original-equipment specification. HL MANDO 30A5012 is listed in this group.

This group includes SKP SK594053, HL MANDO 30A5012 and ATP 102152 and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2008 Kia RIO5, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS96331 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS96331, AJUSA 13224200 and APEX AMS2280, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2008 Kia RIO5 come from 7 brands — HYUNDAI, MELLING, ENGINETECH and 4 other brands. The "Popular" part is HYUNDAI 2221126600.

Part numbers include HYUNDAI 2221126600, MELLING V3047 and ENGINETECH IM4420, among others listed above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2008 Kia RIO5 come from 2 brands — ANCHOR and WESTAR.

Part numbers include ANCHOR 300385 and WESTAR ETK071.