2010 Kia RIO5 Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: HYUNDAI 2420026704.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

4 Camshaft Plug parts for the 2010 Kia RIO5 come from 4 brands — FEL-PRO, HYUNDAI, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: FEL-PRO CP75023, HYUNDAI 2232735504 and MAHLE / CLEVITE 67728, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

6 Camshaft Repair Sleeve parts are listed for the 2010 Kia RIO5, from NATIONAL, SKF, BCA and 3 other brands. NATIONAL 99139 carries the "Popular" badge.

This group includes NATIONAL 99139 and BCA NS99139 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts are listed for the 2010 Kia RIO5, from NATIONAL, SKF, TIMKEN and 9 other brands. NATIONAL 3771 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2010 Kia RIO5 — APEX ACP203.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRHY2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 2010 Kia RIO5 come from 4 brands — ITM ENGINE COMPONENTS, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

This group includes ITM ENGINE COMPONENTS 4B9643, KING ENGINE BEARINGS CR4655AM and MAHLE / CLEVITE CB1979A4 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2010 Kia RIO5 come from 6 brands — FEL-PRO, ITM ENGINE COMPONENTS, AJUSA and 3 other brands. The "Popular" part is FEL-PRO CS262241.

This group includes FEL-PRO CS262241, ITM ENGINE COMPONENTS 0921905 and AJUSA 54130100 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2010 Kia RIO5, from AUTO 7, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand. ITM ENGINE COMPONENTS 5M9516 carries the "Popular" badge.

Listed part numbers: ITM ENGINE COMPONENTS 5M9516, AUTO 7 6000263 and AUTO 7 6000266, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2010 Kia RIO5, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts are listed for the 2010 Kia RIO5, from VICTOR REINZ, FEL-PRO, APEX and 7 other brands. FEL-PRO BS40672 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 2010 Kia RIO5 come from 9 brands — AJUSA, ENGINETECH, APEX and 6 other brands. The "Popular" part is AJUSA 81029900.

Listed part numbers: AJUSA 81029900, ENGINETECH HB251 and APEX AHB240, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2010 Kia RIO5 come from 7 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 4 other brands. The "Popular" part is FEL-PRO 26224PT.

Listed part numbers: FEL-PRO 26224PT, MAHLE / CLEVITE 54484 and AJUSA 10183100, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 2010 Kia RIO5 come from 10 brands — ENGINETECH, FEL-PRO, AJUSA and 7 other brands. The "Popular" part is ENGINETECH HY16HSB.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302190.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies the 3 Engine Block Heater parts for the 2010 Kia RIO5.

Part numbers include KAT'S HEATERS 11485, KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2010 Kia RIO5 come from TECHPRO.

This group includes TECHPRO KI1228107 and TECHPRO KI1228108.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts for the 2010 Kia RIO5 come from 5 brands — AJUSA, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH HY16K3.

Part numbers include ENGINETECH HY16K3, ITM ENGINE COMPONENTS 0900880 and AJUSA 50287500, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts are listed for the 2010 Kia RIO5, from HYUNDAI, ITM ENGINE COMPONENTS, ENGINETECH and 4 other brands. HYUNDAI 2221226050 carries the "Popular" badge.

Part numbers include HYUNDAI 2221226050, ITM ENGINE COMPONENTS RX9642 and ENGINETECH EM4421, among others listed above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: TOPLINE EPSC11.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2010 Kia RIO5 come from 6 brands — SKP, HL MANDO, ATP and 3 other brands. The "Popular" part is SKP SK594053.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594053 is listed in this group.

In the Standard Replacement grade, HL MANDO, ATP, DAYCO and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is HL MANDO 30A5012.

Part numbers include SKP SK594053, HL MANDO 30A5012 and ATP 102152, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2010 Kia RIO5 come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO MS96331.

This group includes FEL-PRO MS96331, AJUSA 13224200 and APEX AMS2280 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 2010 Kia RIO5, from HYUNDAI, MELLING, ENGINETECH and 4 other brands. HYUNDAI 2221126600 carries the "Popular" badge.

Part numbers include HYUNDAI 2221126600, MELLING V3047 and ENGINETECH IM4420, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 2010 Kia RIO5, from WESTAR, ANCHOR, BECK/ARNLEY and 4 other brands. SKP SKM9324 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9324.

The Standard Replacement section: 15 options from WESTAR, ANCHOR, BECK/ARNLEY and 3 other brands. WESTAR EM9310 is listed in this group.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts are listed for the 2010 Kia RIO5, from ANCHOR and WESTAR.

Part numbers include ANCHOR 300385 and WESTAR ETK071.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

104 Oil parts are listed for the 2010 Kia RIO5, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 61 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2010 Kia RIO5 come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2010 Kia RIO5, from DORMAN, AGS, REIN and 1 other brand. DORMAN 090033 carries the "Popular" badge.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2010 Kia RIO5 come from 4 brands — DORMAN, ACKOJA, FEL-PRO and 1 other brand. The "Popular" part is DORMAN 095147.

Part numbers include DORMAN 095147, DORMAN 095144 and ACKOJA A532804, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2010 Kia RIO5, from CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts are listed for the 2010 Kia RIO5, from BOSCH, VARIOUS MFR, WIX and 14 other brands. MOBIL M1104A carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FRAM, FVP and 2 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1104A.

The Standard Replacement section: 14 options from HYUNDAI, BOSCH, DENSO and 10 other brands. BOSCH 3312 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2010 Kia RIO5 come from 2 brands — DORMAN and SPECTRA PREMIUM.

Part numbers include DORMAN 264043 and SPECTRA PREMIUM HYP17A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts are listed for the 2010 Kia RIO5, from VICTOR REINZ, FEL-PRO, APEX and 2 other brands. FEL-PRO OS30780 carries the "Popular" badge.

Listed part numbers: FEL-PRO OS30780, VICTOR REINZ 703141410 and APEX AOP290, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

5 Oil Pump parts are listed for the 2010 Kia RIO5, from SKP, MELLING, ITM ENGINE COMPONENTS and 2 other brands. MELLING M270 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKPM270.

The Standard Replacement section: 4 options from MELLING, ITM ENGINE COMPONENTS, PIERBURG and 1 other brand. MELLING M270 is listed in this group.

This group includes MELLING M270, SKP SKPM270 and ITM ENGINE COMPONENTS 0571528 and the remaining parts above.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts for the 2010 Kia RIO5 come from 2 brands — MELLING and SEALED POWER.

Listed part numbers: MELLING 399S and SEALED POWER 22415093.

This table covers the Oil Temperature senders. Read more

This group shows a single part: VEMO V52721571.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

4 Piston parts for the 2010 Kia RIO5 come from 3 brands — ENGINETECH, MAHLE / CLEVITE and TOPLINE.

In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 681090.

Standard Replacement: 3 parts, from ENGINETECH and TOPLINE. A representative part number is ENGINETECH P4009.

Listed part numbers: MAHLE / CLEVITE 681090, ENGINETECH P4009 and ENGINETECH K40094P, plus the other parts above.