2008 Kia Sorento Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Axle Shaft Bearing parts are listed for the 2008 Kia Sorento, from BECK/ARNLEY, WJB / INMOTION PARTS, BCA and 1 other brand. All of them fit every engine offered in the 2008 Sorento.

In the Economy grade, BECK/ARNLEY and WJB / INMOTION PARTS supply 2 parts: the catalog's value-priced group. A representative part number is BECK/ARNLEY 0514175.

The Standard Replacement section lists 2 options from BCA and TIMKEN — built to original-equipment specification. BCA NBRW101 is listed in this group.

This group includes BECK/ARNLEY 0514175, WJB / INMOTION PARTS WBRW101 and BCA NBRW101 and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts for the 2008 Kia Sorento come from TIMKEN. Every part fits both the 3.3L V6 and the 3.8L V6.

Listed part numbers: TIMKEN SL260188 and TIMKEN SL260189.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

14 CV Axle parts for the 2008 Kia Sorento come from 6 brands — CARDONE, FAMOUS BRAND, APWI and 3 other brands. The "Popular" part is APWI KA8004A. Every part fits both the 3.3L V6 and the 3.8L V6.

The Economy section: 4 options from CARDONE and FAMOUS BRAND. CARDONE 608126 is listed in this group.

Standard Replacement: 10 parts, from APWI, TOP NOTCH, CARDONE and 2 other brands. A representative part number is APWI KA8004A.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2008 Kia Sorento come from 2 brands — BECK/ARNLEY and MEVOTECH. Every part fits both the 3.3L V6 and the 3.8L V6.

Listed part numbers: BECK/ARNLEY 1032544, BECK/ARNLEY 1033033 and MEVOTECH DX217, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

5 Differential Carrier Bearing / Race parts for the 2008 Kia Sorento come from 5 brands — WJB / INMOTION PARTS, SCHAEFFLER, SKF and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WT32210. Every part fits both the 3.3L V6 and the 3.8L V6.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT32210 is listed in this group.

Standard Replacement: 3 parts, from SCHAEFFLER, SKF and TIMKEN. A representative part number is SCHAEFFLER 32210.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: WJB / INMOTION PARTS WT32210, SCHAEFFLER 32210 and SKF BR32210, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

12 Differential Pinion Bearing / Race parts are listed for the 2008 Kia Sorento, from WJB / INMOTION PARTS, BCA, TIMKEN and 2 other brands. WJB / INMOTION PARTS WT30306 carries the "Popular" badge. All of them fit every engine offered in the 2008 Sorento.

Economy: 4 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WT30306.

The Standard Replacement section: 8 options from BCA, TIMKEN, SCHAEFFLER and 1 other brand. BCA NB32307 is listed in this group.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Pinion Seal parts for the 2008 Kia Sorento come from 2 brands — SKF and WJB / INMOTION PARTS. Every part fits both the 3.3L V6 and the 3.8L V6.

Part numbers include SKF 15762A and WJB / INMOTION PARTS WS15762A.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2008 Kia Sorento — TIMKEN 225225.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

9 Drive Shaft parts are listed for the 2008 Kia Sorento, from DORMAN, TRAKMOTIVE, TOP NOTCH and 3 other brands. TOP NOTCH TN7510PS carries the "Popular" badge. 8 parts fit every engine; the other 1 is engine-specific.

This group includes TOP NOTCH TN7510PS, WJB / INMOTION PARTS WDS36210 and CARDONE 653506 and the remaining parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

10 Gear Oil parts for the 2008 Kia Sorento come from VALVOLINE. The "Popular" part is VALVOLINE VV820. Every part fits both the 3.3L V6 and the 3.8L V6.

The SAE 75W-90 section lists 6 options from VALVOLINE — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV820 is listed in this group.

The SAE 80W-90 section lists 4 options from VALVOLINE — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV831 is listed in this group.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

19 Transfer Case Fluid parts for the 2008 Kia Sorento come from 4 brands — VALVOLINE, ACDELCO, MOBIL and 1 other brand. The "Popular" part is ACDELCO 109243. Every part fits both the 3.3L V6 and the 3.8L V6.

The Dexron section lists 7 options from VALVOLINE, ACDELCO and MOBIL — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Mercon section lists 1 option from VALVOLINE — grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. VALVOLINE 822345 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The Type III (H) section lists 2 options from ACDELCO — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. ACDELCO 109240 is listed in this group.

The Type T-4 (Type T-IV) section lists 2 options from IDEMITSU — grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. IDEMITSU 30040093750 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Input Shaft Bearing parts for the 2008 Kia Sorento come from 3 brands — WJB / INMOTION PARTS, SCHAEFFLER and SKF. Every part fits both the 3.3L V6 and the 3.8L V6.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6209N is listed in this group.

Standard Replacement: 2 parts, from SCHAEFFLER and SKF. A representative part number is SCHAEFFLER 6209.

This group includes WJB / INMOTION PARTS RB6209N, SCHAEFFLER 6209 and SKF 6209J.

This table covers the Transfer Case Input Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: NATIONAL M18161.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Transfer Case Input Shaft Seal parts are listed for the 2008 Kia Sorento, from WJB / INMOTION PARTS, NATIONAL, BCA and 2 other brands. NATIONAL 710682 carries the "Popular" badge. All of them fit every engine offered in the 2008 Sorento.

Part numbers include NATIONAL 710682, WJB / INMOTION PARTS WS710682 and BCA NS710682, among others listed above.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

3 Transfer Case Motor parts are listed for the 2008 Kia Sorento, from DORMAN, LARES and WAI GLOBAL. All of them fit every engine offered in the 2008 Sorento.

Part numbers include DORMAN 600820, LARES 30510 and WAI GLOBAL TC1042.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Transfer Case Output Shaft Bearing parts are listed for the 2008 Kia Sorento, from WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. WJB / INMOTION PARTS RB6207 carries the "Popular" badge. All of them fit every engine offered in the 2008 Sorento.

Economy: 3 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6207.

The Standard Replacement section: 10 options from BCA, NATIONAL, SKF and 1 other brand. BCA NB206 is listed in this group.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts for the 2008 Kia Sorento come from 5 brands — NATIONAL, AUTO 7, BCA and 2 other brands. The "Popular" part is NATIONAL 710403. Every part fits both the 3.3L V6 and the 3.8L V6.

Part numbers include NATIONAL 710403, AUTO 7 1260056 and BCA NS710403, among others listed above.

This table covers the Transfer Case Overhaul kits. Read more

This group shows a single part: USA STANDARD GEAR ZTBK4424.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Shift Shaft Seal parts are listed for the 2008 Kia Sorento, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2008 Sorento.

Part numbers include NATIONAL 330385 and WJB / INMOTION PARTS WS330385.

This table covers the U-joints in the driveshaft. Read more

2 Universal Joint parts for the 2008 Kia Sorento come from KIA.

Listed part numbers: KIA 0W00125060A and KIA 495983E100.