483 Engine parts are listed for the 2008 Kia Sorento, in 58 part types, covering both the 3.3L V6 and the 3.8L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 Kia Sorento, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 197 parts of the 483 listed are Oil (94 parts), Oil Filter (66 parts) and Variable Valve Timing (VVT) Solenoid / Actuator (37 parts). The other 55 part types cover the remaining 286 parts.
The 2008 Kia Sorento was sold with both the 3.3L V6 and the 3.8L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2008 Kia Sorento engine parts are VALVOLINE (43 parts), LIQUI MOLY (25 parts) and MOBIL (22 parts), plus 73 more brands. Quality grades include Economy, Standard Replacement and Conventional.
71 parts on this 2008 Kia Sorento page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including APEX ACS2093 (Conversion / Lower Gasket Set) and FEL-PRO BS40710 (Crankshaft Seal). Click any part number to see every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTO 7 Fits: 3.8L V6 | 6150205 | 🇺🇸 US 🇨🇦 CA | Exhaust -Right Bank | View on Amazon |
This table covers the camshafts that open the valves.
This group shows a single part: AUTO 7 6150205.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.8L V6 | BB1045 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 3.8L V6 | RBHY14 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
2 Connecting Rod Bearing parts for the 2008 Kia Sorento come from 2 brands — ENGINETECH and TOPLINE.
This group includes ENGINETECH BB1045 and TOPLINE RBHY14.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.8L V6 | ACS2093 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.8L V6 | 54179100 | 🇺🇸 US 🇨🇦 CA | Engine # G6DA | View on Amazon |
| FEL-PRO Fits: 3.8L V6 | CS26414 | 🇺🇸 US 🇨🇦 CA | Includes RTV Sealant | View on Amazon |
| TOPLINE Fits: 3.8L V6 | CBSHY14 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.8L V6 | 081031101 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Conversion / Lower Gasket Set parts for the 2008 Kia Sorento come from 5 brands — APEX, AJUSA, FEL-PRO and 2 other brands. The "Popular" part is APEX ACS2093.
This group includes APEX ACS2093, AJUSA 54179100 and FEL-PRO CS26414 and the remaining parts above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.8L V6 | BC1034 | 🇺🇸 US | Set | View on Amazon |
| TOPLINE Fits: 3.8L V6 | TWHY14 | 🇺🇸 US 🇨🇦 CA | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 3.8L V6 | MBHY14 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
3 Crankshaft Main Bearing parts are listed for the 2008 Kia Sorento, from TOPLINE and ENGINETECH.
Listed part numbers: ENGINETECH BC1034, TOPLINE TWHY14 and TOPLINE MBHY14.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.8L V6 | NS99177 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Fits: 3.8L V6 | 99177 | 🇺🇸 US 🇨🇦 CA | Front0.551 IN Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.8L V6 | WS99177 | 🇺🇸 US 🇨🇦 CA | Installation Depth: 0.81200000000000006 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
3 Crankshaft Repair Sleeve parts are listed for the 2008 Kia Sorento, from BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.8L V6 | BS40710 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| FEL-PRO Popular Fits: 3.8L V6 | TCS46111 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.8L V6 | 67874 | 🇺🇸 US 🇨🇦 CA | FrontMolded Rubber | View on Amazon |
| NATIONAL Popular Fits: 3.8L V6 | 494122 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| AJUSA Fits: 3.8L V6 | 15048600 | 🇺🇸 US 🇨🇦 CA | Complete Set | View on Amazon |
| APEX Fits: 3.8L V6 | ABS299 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 3.8L V6 | ATC2930 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0523785 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| ELRING Fits: 3.8L V6 | 642720 | 🇨🇦 CA | Swirl Type: RD | View on Amazon |
| ELRING Fits: 3.8L V6 | 475260 | 🇺🇸 US 🇨🇦 CA | Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.8L V6 | 902760 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [mm]: 91Material: FPM (Fluoride Rubber) | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | 67729 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| SCHAEFFLER Fits: 3.8L V6 | SS3384 | 🇺🇸 US 🇨🇦 CA | Rear4.38" O.D. X 0.39" Width | View on Amazon |
| SKF Fits: 3.8L V6 | 35905 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 813479800 | 🇺🇸 US 🇨🇦 CA | RearRubber | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 811041800 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 191020301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.8L V6 | WS494122 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
18 Crankshaft Seal parts are listed for the 2008 Kia Sorento, from ELRING, VICTOR REINZ, FEL-PRO and 8 other brands. FEL-PRO BS40710 carries the "Popular" badge.
Crankshaft Seal Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.8L V6 | 476430 | 🇺🇸 US 🇨🇦 CA | Fits transmission sidedor Transmission SidedRWD | View on Amazon |
This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 476430.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.8L V6 | AHB293 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.8L V6 | ES72366 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| AJUSA Fits: 3.8L V6 | 81056400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.8L V6 | HB283 | 🇺🇸 US | Set | View on Amazon |
| HYUNDAI Fits: 3.8L V6 | 223213C100 | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.8L V6 | GS33791 | 🇺🇸 US 🇨🇦 CA | Includes WashersSteel | View on Amazon |
| TOPLINE Fits: 3.8L V6 | HBHY14 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 141059701 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
8 Cylinder Head Bolt parts for the 2008 Kia Sorento come from 8 brands — APEX, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is APEX AHB293.
Listed part numbers: APEX AHB293, FEL-PRO ES72366 and AJUSA 81056400, plus the other parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.8L V6 | AHG1150R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| FEL-PRO Popular Fits: 3.8L V6 | 26416PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| ULTRA-POWER Popular Fits: 3.8L V6 | 26416PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| ULTRA-POWER Popular Fits: 3.8L V6 | 26420PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| AJUSA Fits: 3.8L V6 | 10192500 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.8L V6 | 10192600 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.8L V6 | 52342800 | 🇺🇸 US 🇨🇦 CA | LeftEngine # G6DA | View on Amazon |
| AJUSA Fits: 3.8L V6 | 52342700 | 🇺🇸 US 🇨🇦 CA | RightEngine # G6DA | View on Amazon |
| APEX Fits: 3.8L V6 | AHG1151L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0352138 | 🇺🇸 US 🇨🇦 CA | Multi-Layer Steel | View on Amazon |
| ELRING Fits: 3.8L V6 | 794760 | 🇺🇸 US 🇨🇦 CA | Fits Right | View on Amazon |
| ELRING Fits: 3.8L V6 | 794770 | 🇺🇸 US 🇨🇦 CA | Fits Left | View on Amazon |
| FEL-PRO Fits: 3.8L V6 | 26420PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | 54763 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | 54764 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 611108800 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 611070000 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
17 Cylinder Head Gasket parts for the 2008 Kia Sorento come from 8 brands — AJUSA, APEX, FEL-PRO and 5 other brands. The "Popular" part is APEX AHG1150R.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.8L V6 | HY38HSB | 🇺🇸 US | Multi-Layer Steel Head Gaskets | View on Amazon |
| FEL-PRO Popular Fits: 3.8L V6 | HS26420PT | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| AJUSA Fits: 3.8L V6 | 52349600 | 🇺🇸 US 🇨🇦 CA | Complete Set | View on Amazon |
| APEX Fits: 3.8L V6 | AHS11051 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.8L V6 | 864460 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ENGINETECH Fits: 3.8L V6 | HY38HSBWB | 🇺🇸 US 🇨🇦 CA | Includes Head Boltswith MLS head gaskets | View on Amazon |
| FEL-PRO Fits: 3.8L V6 | HS26420PTVK | 🇺🇸 US 🇨🇦 CA | Permadry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Head Bolts, Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | HS54763 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ULTRA-POWER Fits: 3.8L V6 | HS26420PT | 🇺🇸 US 🇨🇦 CA | Head Bolts Not IncludedHead Bolt Replacement Recommended | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 021065901 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
10 Cylinder Head Gasket Set parts for the 2008 Kia Sorento come from 8 brands — ENGINETECH, FEL-PRO, AJUSA and 5 other brands. The "Popular" part is ENGINETECH HY38HSB.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 3.8L V6 | 11479 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
| KAT'S HEATERS Fits: 3.8L V6 | 11480 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
KAT'S HEATERS supplies both parts for the 2008 Kia Sorento.
Part numbers include KAT'S HEATERS 11479 and KAT'S HEATERS 11480.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.8L V6 | 50313700 | 🇺🇸 US 🇨🇦 CA | Engine # G6DA | View on Amazon |
| ELRING Fits: 3.8L V6 | 659480 | 🇺🇸 US 🇨🇦 CA | with crankshaft sealwith valve stem seals | View on Amazon |
| TOPLINE Fits: 3.8L V6 | CGSHY14 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.8L V6 | CGSHY14E | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Engine Kit Gasket Set parts for the 2008 Kia Sorento come from 3 brands — TOPLINE, AJUSA and ELRING.
Part numbers include AJUSA 50313700, ELRING 659480 and TOPLINE CGSHY14, among others listed above.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.8L V6 | V3287 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.8L V6 | 1013287 | 🇺🇸 US 🇨🇦 CA | 1.220 Head Diameter. 0215 Stem | View on Amazon |
| SBI Fits: 3.8L V6 | 13287 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.8L V6 | EVHY14 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
4 Exhaust Valve parts are listed for the 2008 Kia Sorento, from MELLING, QUALCAST, SBI and 1 other brand.
Part numbers include MELLING V3287, QUALCAST 1013287 and SBI 13287, among others listed above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.8L V6 | 594294 | 🇺🇸 US 🇨🇦 CA | SerpentineDiameter | View on Amazon |
| HL MANDO Popular Fits: 3.8L V6 | 30A5015 | 🇺🇸 US 🇨🇦 CA | New | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A520618 | 🇺🇸 US 🇨🇦 CA | From 18/09/2006Pulley Only | View on Amazon |
| ATP Fits: 3.8L V6 | 102222 | 🇺🇸 US 🇨🇦 CA | Serpentine | View on Amazon |
| ATP Fits: 3.8L V6 | 102338 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 3.8L V6 | PB1528N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
| PIONEER Fits: 3.8L V6 | DA204 | 🇺🇸 US 🇨🇦 CA | Groove Quantity 6Serpentine | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
7 Harmonic Balancer parts for the 2008 Kia Sorento come from 6 brands — ATP, DORMAN, HL MANDO and 3 other brands. The "Popular" part is DORMAN 594294.
This group includes DORMAN 594294, HL MANDO 30A5015 and ACKOJA A520618 and the remaining parts above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.8L V6 | MS97086 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.8L V6 | MS19730 | 🇺🇸 US 🇨🇦 CA | Beaded Steel | View on Amazon |
| APEX Fits: 3.8L V6 | AMS2930 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0376211 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0376213 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ELRING Fits: 3.8L V6 | 795370 | 🇺🇸 US 🇨🇦 CA | Fits Left | View on Amazon |
| ELRING Fits: 3.8L V6 | 795380 | 🇺🇸 US 🇨🇦 CA | Fits Right | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | MS19727 | 🇺🇸 US 🇨🇦 CA | Beaded SteelIncludes Plenum Gasket | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 715267300 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.8L V6 | 111075501 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
10 Intake Manifold Gasket parts for the 2008 Kia Sorento come from 6 brands — MAHLE / CLEVITE, BECK/ARNLEY, ELRING and 3 other brands. The "Popular" part is FEL-PRO MS97086.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.8L V6 | MS97227 | 🇺🇸 US 🇨🇦 CA | UpperOriginal Equipment (OE) Part Number 29215-3C100, 29215-3C301 | View on Amazon |
| APEX Fits: 3.8L V6 | AMS2932 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0374865 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.8L V6 | MS19726 | 🇺🇸 US 🇨🇦 CA | Rubber Coated Embossed Metal | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 151082301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Plenum Gasket parts are listed for the 2008 Kia Sorento, from FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. FEL-PRO MS97227 carries the "Popular" badge.
This group includes FEL-PRO MS97227, APEX AMS2932 and BECK/ARNLEY 0374865 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.8L V6 | V3286 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.8L V6 | IM4468 | 🇺🇸 US | .2151 stem1.420" Head | View on Amazon |
| QUALCAST Fits: 3.8L V6 | 1013286 | 🇺🇸 US 🇨🇦 CA | 1.413 Head Dia. 0.215 Stem | View on Amazon |
| SBI Fits: 3.8L V6 | 13286 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.8L V6 | IVHY14 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Intake Valve parts are listed for the 2008 Kia Sorento, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V3286 carries the "Popular" badge.
Part numbers include MELLING V3286, ENGINETECH IM4468 and QUALCAST 1013286, among others listed above.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.8L V6 | 9329 | 🇺🇸 US 🇨🇦 CA | Fits Front RightHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.8L V6 | A7180 | 🇺🇸 US 🇨🇦 CA | Fits Front Right | View on Amazon |
| PIONEER Fits: 3.8L V6 | 607180 | 🇺🇸 US 🇨🇦 CA | Fits Front Right | View on Amazon |
| WESTAR Fits: 3.8L V6 | EM9329 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
4 Motor Mount parts are listed for the 2008 Kia Sorento, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.
Part numbers include ANCHOR 9329, DEA / MARMON RIDE CONTROL A7180 and PIONEER 607180, among others listed above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.8L V6 | 300371 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2008 Kia Sorento — ANCHOR 300371.
Oil
Summary: Notes list SAE 0W-20, SAE 0W-30, SAE 5W-20, SAE 5W-30, SAE 5W-40 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, LIQUI MOLY and MOBIL.
Conventional
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUCAS OIL Fits: 3.8L V6 | 10276 | 🇺🇸 US 🇨🇦 CA | CONVENTIONAL MOTOR OIL SAE 10W-301 qt | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 797578 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 Conventional1 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881156 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 ConventionalEasy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881046 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 Conventional5 Gallon Bay Box | View on Amazon |
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 3.8L V6 | 125195 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 3.8L V6 | 125196 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 5W-20Mobil Full Synthetic | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20136 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2258 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20226 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2248 | 🇺🇸 US 🇨🇦 CA | Special Tec LL 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 22260 | 🇺🇸 US 🇨🇦 CA | Special Tec B FE 0W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2331 | 🇺🇸 US 🇨🇦 CA | Leichtlauf High Tech 5W-401 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20446 | 🇺🇸 US 🇨🇦 CA | Top Tec 4600 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2038 | 🇺🇸 US 🇨🇦 CA | Longtime High Tech 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 22156 | 🇺🇸 US 🇨🇦 CA | Top Tec 4210 0W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2004 | 🇺🇸 US 🇨🇦 CA | Top Tec 4200 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20138 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2259 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-205 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2249 | 🇺🇸 US 🇨🇦 CA | Special Tec LL 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2332 | 🇺🇸 US 🇨🇦 CA | Leichtlauf High Tech 5W-405 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20228 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2039 | 🇺🇸 US 🇨🇦 CA | Longtime High Tech 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20448 | 🇺🇸 US 🇨🇦 CA | Top Tec 4600 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 22261 | 🇺🇸 US 🇨🇦 CA | Special Tec B FE 0W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 2011 | 🇺🇸 US 🇨🇦 CA | Top Tec 4200 5W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 22158 | 🇺🇸 US 🇨🇦 CA | Top Tec 4210 0W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20124 | 🇺🇸 US 🇨🇦 CA | Special Tec LL 5W-3020 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20122 | 🇺🇸 US 🇨🇦 CA | Leichtlauf High Tech 5W-4020 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 22269 | 🇺🇸 US 🇨🇦 CA | Special Tec B FE 0W-3020 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20345 | 🇺🇸 US 🇨🇦 CA | Top Tec 4600 5W-3020 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.8L V6 | 20125 | 🇺🇸 US 🇨🇦 CA | Top Tec 4200 5W-3020 Liter | View on Amazon |
| LUCAS OIL Fits: 3.8L V6 | 10049 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: 3.8L V6 | 18005 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| MOBIL Fits: 3.8L V6 | 103008 | 🇺🇸 US 🇨🇦 CA | 5W-20Mobil 1 Advanced | View on Amazon |
| MOBIL Fits: 3.8L V6 | 122319 | 🇺🇸 US 🇨🇦 CA | 10W-30Mobil 1 Advanced | View on Amazon |
| MOBIL Fits: 3.8L V6 | 124315 | 🇺🇸 US 🇨🇦 CA | 5W-30Mobil 1 Advanced | View on Amazon |
| MOBIL Fits: 3.8L V6 | 102990 | 🇺🇸 US 🇨🇦 CA | Extended Performance 10W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 3.8L V6 | 112627 | 🇺🇸 US 🇨🇦 CA | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 3.8L V6 | 102989 | 🇺🇸 US 🇨🇦 CA | Extended Performance 5W-20Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 3.8L V6 | 124595 | 🇺🇸 US 🇨🇦 CA | Truck & SUV 5W-30Mobil 1 Truck & SUV | View on Amazon |
| MOBIL Fits: 3.8L V6 | 124574 | 🇺🇸 US 🇨🇦 CA | Truck & SUV 5W-20Mobil 1 Truck & SUV | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | VV927 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | VV955 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | VV935 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 891678 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 891680 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 904536 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 904540 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 904564 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881147 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 891670 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 891672 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 904538 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 904562 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-205 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 904566 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881167 | 🇺🇸 US 🇨🇦 CA | European Vehicle Full Synthetic XL-III SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881164 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881165 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 10W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 3.8L V6 | VV1556 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: 3.8L V6 | 125202 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage 5W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Fits: 3.8L V6 | 125201 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage 5W-301 Quart | View on Amazon |
| MOBIL Fits: 3.8L V6 | 123842 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| MOBIL Fits: 3.8L V6 | 103535 | 🇺🇸 US 🇨🇦 CA | High Mileage 10W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.8L V6 | 103767 | 🇺🇸 US 🇨🇦 CA | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.8L V6 | 120455 | 🇺🇸 US 🇨🇦 CA | High Mileage 5W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.8L V6 | 123839 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 5W-20Extended Performance High Mileage Synthetic Motor Oil 5W-20, 1 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 609506 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 797976 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 833002 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 849644 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | VV179 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 852400 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | VV180 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881149 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881163 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881161 | 🇺🇸 US 🇨🇦 CA | High Mileage with Max Life Technology Synthetic Blend SAE 10W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881170 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 10W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881169 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881171 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881168 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881162 | 🇺🇸 US 🇨🇦 CA | High Mileage with Max Life Technology Synthetic Blend SAE 5W-20Easy Pour 5 Quart | View on Amazon |
Racing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| IDEMITSU Fits: 3.8L V6 | 30018100750 | 🇺🇸 US | 10W30 Rotary Racing Oil1 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 822388 | 🇺🇸 US 🇨🇦 CA | VR1 Racing SAE 10W-301 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 3.8L V6 | 124406 | 🇺🇸 US 🇨🇦 CA | Super 10W-30Mobil Super | View on Amazon |
| MOBIL Popular Fits: 3.8L V6 | 124407 | 🇺🇸 US 🇨🇦 CA | Super 5W-30Mobil Super | View on Amazon |
| MOBIL Popular Fits: 3.8L V6 | 124408 | 🇺🇸 US 🇨🇦 CA | Super 5W-20Mobil Super | View on Amazon |
| ACDELCO Fits: 3.8L V6 | 109292 | 🇺🇸 US | Synthetic BlendAPI SP Specifications | View on Amazon |
| ACDELCO Fits: 3.8L V6 | 109290 | 🇺🇸 US | Synthetic BlendAPI SP Specifications | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 797975 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 797974 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-20 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 818289 | 🇺🇸 US 🇨🇦 CA | Premium Blue One Solution GEN2 Synthetic Blend SAE 10W-301 Retail Gallon | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881158 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-20 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 881159 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.8L V6 | 891015 | 🇺🇸 US 🇨🇦 CA | Premium Blue One Solution GEN2 Synthetic Blend SAE 10W-305 Gallon | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
94 Oil parts are listed for the 2008 Kia Sorento, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. MOBIL 125195 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 54 parts from LIQUI MOLY, VALVOLINE, MOBIL and 1 other brand.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 3.8L V6 | KI1421512 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
| DORMAN Fits: 3.8L V6 | 921200 | 🇺🇸 US 🇨🇦 CA | Tube Only | View on Amazon |
This table covers the Oil Dipstick tubes.
2 Oil Dipstick / Tube parts are listed for the 2008 Kia Sorento, from AUTOTECNICA and DORMAN.
This group includes AUTOTECNICA KI1421512 and DORMAN 921200.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.8L V6 | 090033 | 🇺🇸 US 🇨🇦 CA | StandardM14-1.50 | View on Amazon |
| DORMAN Popular Fits: 3.8L V6 | 090053 | 🇺🇸 US 🇨🇦 CA | MetalPilot Point | View on Amazon |
| AGS Fits: 3.8L V6 | ODP00007 | 🇺🇸 US 🇨🇦 CA | M14x1.50 | View on Amazon |
| DORMAN Fits: 3.8L V6 | 092020 | 🇺🇸 US 🇨🇦 CA | Thread Size: M14-1.50Twist Style | View on Amazon |
| ENGINETECH Fits: 3.8L V6 | DP8022 | 🇺🇸 US | View on Amazon | |
| REIN Fits: 3.8L V6 | HWU0110 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.8L V6 | SK090053CD | 🇺🇸 US 🇨🇦 CA | Metal | View on Amazon |
This table covers the drain plugs in the oil pan.
7 Oil Drain Plug parts are listed for the 2008 Kia Sorento, from DORMAN, AGS, ENGINETECH and 2 other brands. DORMAN 090033 carries the "Popular" badge.
Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.8L V6 | 095147 | 🇺🇸 US 🇨🇦 CA | SizeM14 | View on Amazon |
| DORMAN Popular Fits: 3.8L V6 | 095144 | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A532804 | 🇺🇸 US 🇨🇦 CA | Fits From 09/18/2006To 10/21/2008 | View on Amazon |
| DORMAN Fits: 3.8L V6 | 995147CD | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.8L V6 | 726760 | 🇺🇸 US 🇨🇦 CA | Material: Aluminium | View on Amazon |
| FEL-PRO Fits: 3.8L V6 | 73346 | 🇺🇸 US 🇨🇦 CA | 0.570 (in) Inside Diameter x 0.860 (in) Outside DiameterFlat Washer | View on Amazon |
| ULTRA-POWER Fits: 3.8L V6 | 095147 | 🇺🇸 US 🇨🇦 CA | ID: 0.556"aluminum Gasket | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Oil Drain Plug Gasket parts for the 2008 Kia Sorento come from 5 brands — DORMAN, ACKOJA, ELRING and 2 other brands. The "Popular" part is DORMAN 095147.
This group includes DORMAN 095147, DORMAN 095144 and ACKOJA A532804 and the remaining parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CALORSTAT Fits: 3.8L V6 | OC2331 | 🇺🇸 US 🇨🇦 CA | PlasticScrewithoutn | View on Amazon |
| GATES Fits: 3.8L V6 | 31083 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOTORAD Fits: 3.8L V6 | MO81 | 🇺🇸 US 🇨🇦 CA | Gasket or Seal Pre-Installed: Yes | View on Amazon |
| SKP Fits: 3.8L V6 | SKMO81 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the caps on the oil filler neck.
4 Oil Filler Cap parts are listed for the 2008 Kia Sorento, from CALORSTAT, GATES, MOTORAD and 1 other brand.
Part numbers include CALORSTAT OC2331, GATES 31083 and MOTORAD MO81, among others listed above.
Oil Filler Cap Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.8L V6 | 453020 | 🇺🇸 US 🇨🇦 CA | Fits or RWD | View on Amazon |
This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 453020.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Popular Fits: 3.8L V6 | PXL57061 | 🇺🇸 US 🇨🇦 CA | 5.1" Paper Filter Cartridge | View on Amazon |
| BWD/NIEHOFF Fits: 3.8L V6 | M5610 | 🇺🇸 US 🇨🇦 CA | Height 5.16"STD Cartridge | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.8L V6 | CF5848 | 🇺🇸 US 🇨🇦 CA | From 08/26/07 | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.8L V6 | CF5610 | 🇺🇸 US 🇨🇦 CA | To 08/27/07 | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.8L V6 | P972 | 🇺🇸 US 🇨🇦 CA | Before 8/27/07. | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.8L V6 | P982 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: No | View on Amazon |
| CHAMPION FILTER Fits: 3.8L V6 | 55250T | 🇺🇸 US 🇨🇦 CA | TECHNICIAN4.1" CARTRIDGE HEIGHT | View on Amazon |
| CHAMPION FILTER Fits: 3.8L V6 | 55061T | 🇺🇸 US 🇨🇦 CA | TECHNICIAN5.1" CARTRIDGE HEIGHT | View on Amazon |
| ECOGARD Fits: 3.8L V6 | X5610 | 🇺🇸 US 🇨🇦 CA | Conventional Media | View on Amazon |
| ECOGARD Fits: 3.8L V6 | CF5610 | 🇺🇸 US 🇨🇦 CA | 5.1" Cartridge | View on Amazon |
| ECOGARD Fits: 3.8L V6 | CF5848 | 🇺🇸 US 🇨🇦 CA | 4.2" CARTRIDGE | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | R84061 | 🇺🇸 US 🇨🇦 CA | HEIGHT 5.16" | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | R84250 | 🇺🇸 US 🇨🇦 CA | HEIGHT 4.17" | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | R84029 | 🇺🇸 US 🇨🇦 CA | 4.1" Cartridge Height, 4.1" Cartridge, . | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | 84061 | 🇺🇸 US 🇨🇦 CA | HEIGHT 5.16" | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | 84250 | 🇺🇸 US 🇨🇦 CA | HEIGHT 4.17" | View on Amazon |
| FRAM Fits: 3.8L V6 | FP10515 | 🇺🇸 US 🇨🇦 CA | Pro | View on Amazon |
| FRAM Fits: 3.8L V6 | FPS9999 | 🇺🇸 US 🇨🇦 CA | PRO SYNTHETIC | View on Amazon |
| FVP Fits: 3.8L V6 | G7061 | 🇺🇸 US 🇨🇦 CA | 5.1 IN Paper Filter Cartridge | View on Amazon |
| FVP Fits: 3.8L V6 | G7029 | 🇺🇸 US 🇨🇦 CA | 4.1 IN Paper Filter Cartridge | View on Amazon |
| OMNICRAFT Fits: 3.8L V6 | QFL12 | 🇺🇸 US 🇨🇦 CA | 5.1" Cartridge | View on Amazon |
| OMNICRAFT Fits: 3.8L V6 | QFL8 | 🇺🇸 US 🇨🇦 CA | 4.1" CARTRIDGE4.1" CARTRIDGE HEIGHT | View on Amazon |
| PENTIUS Fits: 3.8L V6 | PCBT4018 | 🇺🇸 US 🇨🇦 CA | Mfg after 8/26/07Engine VIN 6 | View on Amazon |
| PRIME GUARD Fits: 3.8L V6 | POF5610 | 🇺🇸 US 🇨🇦 CA | To 08/27/07 | View on Amazon |
| PRO-TEC Fits: 3.8L V6 | PXL57029 | 🇺🇸 US 🇨🇦 CA | Includes 4 Gasket Pack | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | V5610 | 🇺🇸 US 🇨🇦 CA | To 08/26/0724 VALVES | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | TL35610 | 🇺🇸 US 🇨🇦 CA | Class: W | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | PPL35610 | 🇺🇸 US 🇨🇦 CA | with Cartridge Element Height of 5.12"24 Valves | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | L35610 | 🇺🇸 US 🇨🇦 CA | Class: D | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | PL35610 | 🇺🇸 US 🇨🇦 CA | 5.1" Paper Filter Cartridge | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | PL25848 | 🇺🇸 US 🇨🇦 CA | 4.1" Paper Filter Cartridge | View on Amazon |
| PUROLATOR Fits: 3.8L V6 | PSL35610 | 🇺🇸 US 🇨🇦 CA | with Cartridge Element Height of 5.12"Synthetic | View on Amazon |
| ULTRA-POWER Fits: 3.8L V6 | 57029 | 🇺🇸 US 🇨🇦 CA | 4.1" Paper Filter CartridgeOE# 26320-3F100 | View on Amazon |
| ULTRA-POWER Fits: 3.8L V6 | 57061 | 🇺🇸 US 🇨🇦 CA | 5.1" Paper Filter Cartridge | View on Amazon |
| ULTRA-POWER Fits: 3.8L V6 | R84029 | 🇺🇸 US 🇨🇦 CA | 4.1" CARTRIDGE TYPE | View on Amazon |
| VARIOUS MFR Fits: 3.8L V6 | PG5610 | 🇺🇸 US 🇨🇦 CA | Height 5.16 in. | View on Amazon |
| VARIOUS MFR Fits: 3.8L V6 | PG5848 | 🇺🇸 US 🇨🇦 CA | Height 4.17 in. | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 3.8L V6 | M1C255A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
| ECOGARD Fits: 3.8L V6 | S5848 | 🇺🇸 US 🇨🇦 CA | Extended Interval Media | View on Amazon |
| FRAM Fits: 3.8L V6 | TG9999 | 🇺🇸 US 🇨🇦 CA | Tough GuardCartridge Filter | View on Amazon |
| MOBIL Fits: 3.8L V6 | M1C255 | 🇺🇸 US 🇨🇦 CA | Extended Performance15,000 Mile Warranty | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM Popular Fits: 3.8L V6 | CH10515 | 🇺🇸 US 🇨🇦 CA | Extra GuardCartridge Filter | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.8L V6 | OX351D | 🇺🇸 US 🇨🇦 CA | Includes Gasket (Length 104mm)Includes Gasket (Length 97mm) | View on Amazon |
| WIX Popular Fits: 3.8L V6 | 57029 | 🇺🇸 US 🇨🇦 CA | 4.1" Paper Filter Cartridge | View on Amazon |
| WIX Popular Fits: 3.8L V6 | 57061 | 🇺🇸 US 🇨🇦 CA | Cartridge Lube Metal Free Filter | View on Amazon |
| ACDELCO Fits: 3.8L V6 | PF463G | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalProper Disposal Image: PL42_PD_OILFILTER.pdf | View on Amazon |
| ACDELCO Fits: 3.8L V6 | PF2261 | 🇺🇸 US 🇨🇦 CA | Gold / Professional | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A520119 | 🇺🇸 US 🇨🇦 CA | 130MMTo 08/07/2008 | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A520505 | 🇺🇸 US 🇨🇦 CA | with OE No. 263203C300 | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A520503 | 🇺🇸 US 🇨🇦 CA | 105mmFrom 08/27/2007 | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0418192 | 🇺🇸 US 🇨🇦 CA | For models with 130mm total length filter | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0410846 | 🇺🇸 US 🇨🇦 CA | For models with 105mm total length filter | View on Amazon |
| BOSCH Fits: 3.8L V6 | 3848 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.8L V6 | P982XL | 🇺🇸 US 🇨🇦 CA | XL Synthetic | View on Amazon |
| CHAMP / LUBER-FINER Fits: 3.8L V6 | P972XL | 🇺🇸 US 🇨🇦 CA | XL Synthetic | View on Amazon |
| DENSO Fits: 3.8L V6 | 1503052 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| FEL-PRO Fits: 3.8L V6 | OFCS3006 | 🇺🇸 US 🇨🇦 CA | Includes Cap and Filter | View on Amazon |
| FEL-PRO Fits: 3.8L V6 | OFCS3007 | 🇺🇸 US 🇨🇦 CA | Includes Cap and Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.8L V6 | CF642 | 🇺🇸 US 🇨🇦 CA | From 08/26/07 | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.8L V6 | LF642 | 🇺🇸 US 🇨🇦 CA | 8/26/2007-On | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.8L V6 | LF615 | 🇺🇸 US 🇨🇦 CA | To 8/26/2007 | View on Amazon |
| HENGST Fits: 3.8L V6 | E840HD331 | 🇺🇸 US 🇨🇦 CA | Includes Gasket SetCartridge | View on Amazon |
| HYUNDAI Fits: 3.8L V6 | 263203C100 | 🇺🇸 US 🇨🇦 CA | 130MM THRU 08/07 | View on Amazon |
| HYUNDAI Fits: 3.8L V6 | 263203C300 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.8L V6 | OX773D | 🇺🇸 US 🇨🇦 CA | Filter Outside Diameter (mm): 73.50Includes Gasket (Length 121mm) | View on Amazon |
| VARIOUS MFR Fits: 3.8L V6 | PG5610EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
66 Oil Filter parts are listed for the 2008 Kia Sorento, from PUROLATOR, CHAMP / LUBER-FINER, FAMOUS BRAND and 23 other brands. PRO-TEC PXL57061 carries the "Popular" badge. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Economy the largest group at 37 parts from PUROLATOR, FAMOUS BRAND, CHAMP / LUBER-FINER and 11 other brands.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.8L V6 | 72340 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.8L V6 | B33280 | 🇺🇸 US 🇨🇦 CA | Oil Filter Adapter GasketSteel | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
2 Oil Filter Adapter Gasket / O-Ring parts for the 2008 Kia Sorento come from 2 brands — FEL-PRO and MAHLE / CLEVITE.
This group includes FEL-PRO 72340 and MAHLE / CLEVITE B33280.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: 3.8L V6 | MO384 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter covers.
This group shows a single part: MOTORAD MO384.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Popular Fits: 3.8L V6 | 215103C600 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ACKOJA Fits: 3.8L V6 | A520446 | 🇺🇸 US 🇨🇦 CA | Lowerwith OE No. 215103C600 | View on Amazon |
| DORMAN Fits: 3.8L V6 | 264435 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| SKP Fits: 3.8L V6 | SK264435 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| SPECTRA PREMIUM Fits: 3.8L V6 | HYP25A | 🇺🇸 US 🇨🇦 CA | LowerGasket and/or Sealant Not Included | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
5 Oil Pan parts for the 2008 Kia Sorento come from 5 brands — HYUNDAI, ACKOJA, DORMAN and 2 other brands. The "Popular" part is HYUNDAI 215103C600.
Part numbers include HYUNDAI 215103C600, ACKOJA A520446 and DORMAN 264435, among others listed above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.8L V6 | OS30822 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| VICTOR REINZ Popular Fits: 3.8L V6 | 703141410 | 🇺🇸 US 🇨🇦 CA | RTV Silicone | View on Amazon |
| APEX Fits: 3.8L V6 | AOP293 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | OS32556 | 🇺🇸 US 🇨🇦 CA | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 711673300 | 🇺🇸 US 🇨🇦 CA | with 13 Bolt Holes | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 101027001 | 🇺🇸 US 🇨🇦 CA | Fiber | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Pan Gasket parts are listed for the 2008 Kia Sorento, from VICTOR REINZ, FEL-PRO, APEX and 1 other brand. FEL-PRO OS30822 carries the "Popular" badge.
Part numbers include FEL-PRO OS30822, VICTOR REINZ 703141410 and APEX AOP293, among others listed above.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.8L V6 | EPK146 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
| SKP Fits: 3.8L V6 | SKPM513 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: 3.8L V6 | 213103C300 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.8L V6 | M513 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.8L V6 | OPHY14 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
5 Oil Pump parts are listed for the 2008 Kia Sorento, from ENGINETECH, SKP, HYUNDAI and 2 other brands.
In the Economy grade, ENGINETECH and SKP supply 2 parts: the catalog's value-priced group. A representative part number is ENGINETECH EPK146.
The Standard Replacement section lists 3 options from HYUNDAI, MELLING and TOPLINE — built to original-equipment specification. HYUNDAI 213103C300 is listed in this group.
Part numbers include ENGINETECH EPK146, SKP SKPM513 and HYUNDAI 213103C300, among others listed above.
Oil Pump Chain
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | C772 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | TS21772 | 🇺🇸 US 🇨🇦 CA | Sprockets Not IncludedOil Pump Drive Set | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | 76264S | 🇺🇸 US 🇨🇦 CA | Includes Chain, Guide, TensionerOil Pump Drive Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.8L V6 | 1046 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Popular Fits: 3.8L V6 | C1043 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.8L V6 | C772 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.8L V6 | ZC76264S | 🇺🇸 US 🇨🇦 CA | Includes 1 Chain, 1 Tensioner, 1 GuideOil Pump Drive Set | View on Amazon |
| INA Fits: 3.8L V6 | ZCC772 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the chains that drive the oil pump.
8 Oil Pump Chain parts for the 2008 Kia Sorento come from 5 brands — PREFERRED COMPONENTS INC, S.A. GEAR, INA and 2 other brands. The "Popular" part is MELLING 1046.
The Economy section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC C772 is listed in this group.
The Kit section lists 2 options from PREFERRED COMPONENTS INC and S.A. GEAR — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. PREFERRED COMPONENTS INC TS21772 is listed in this group.
Standard Replacement: 5 parts, from INA, MELLING, S.A. GEAR and 1 other brand. A representative part number is MELLING 1046.
Part numbers include MELLING 1046, PREFERRED COMPONENTS INC C772 and PREFERRED COMPONENTS INC TS21772, among others listed above.
Oil Pump Chain Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.8L V6 | 95886 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 3.8L V6 | 0241390 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.8L V6 | BG7001 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | R76099 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | 71088 | 🇺🇸 US 🇨🇦 CA | Oil Pump | View on Amazon |
This table covers the Oil Pump Chain guides.
5 Oil Pump Chain Guide parts for the 2008 Kia Sorento come from 5 brands — CLOYES, BECK/ARNLEY, MELLING and 2 other brands. The "Popular" part is CLOYES 95886.
Listed part numbers: CLOYES 95886, BECK/ARNLEY 0241390 and MELLING BG7001, plus the other parts above.
Oil Pump Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.8L V6 | 95885 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 3.8L V6 | 95885 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HYUNDAI Fits: 3.8L V6 | 245603C100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.8L V6 | BT7000 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | T66109 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
5 Oil Pump Chain Tensioner parts are listed for the 2008 Kia Sorento, from CLOYES, FVP, HYUNDAI and 2 other brands. CLOYES 95885 carries the "Popular" badge.
This group includes CLOYES 95885 and HYUNDAI 245603C100 and the remaining parts above.
Oil Pump Drive Gear
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | G56024 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump Drive gears.
This group shows a single part: PREFERRED COMPONENTS INC G56024.
Oil Pump Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.8L V6 | S1078 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 3.8L V6 | S1078 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.8L V6 | ZSS1078 | 🇺🇸 US 🇨🇦 CA | Oil Pump Drive Gear | View on Amazon |
| MELLING Fits: 3.8L V6 | S1238 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.8L V6 | S1315 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump sprockets.
5 Oil Pump Sprocket parts for the 2008 Kia Sorento come from 5 brands — CLOYES, FVP, INA and 2 other brands. The "Popular" part is CLOYES S1078.
Listed part numbers: CLOYES S1078 and INA ZSS1078, plus the other parts above.
Piston
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOPLINE Fits: 3.8L V6 | PAHY14 | 🇺🇸 US 🇨🇦 CA | Includes Rings | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
This group shows a single part: TOPLINE PAHY14.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS Fits: 3.8L V6 | 0219287 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| TOPLINE Fits: 3.8L V6 | RSHY14 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts for the 2008 Kia Sorento come from 2 brands — ITM ENGINE COMPONENTS and TOPLINE.
Listed part numbers: ITM ENGINE COMPONENTS 0219287 and TOPLINE RSHY14.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.8L V6 | TW1034 | 🇺🇸 US | (Size: Standard) | View on Amazon |
This table covers the Thrust washers.
One part is listed for the 2008 Kia Sorento — ENGINETECH TW1034.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.8L V6 | S1076 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ULTRA-POWER Popular Fits: 3.8L V6 | VCTA1002I | 🇺🇸 US 🇨🇦 CA | Cam GearIntake | View on Amazon |
| KIA Fits: 3.8L V6 | 231223C100 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| MELLING Fits: 3.8L V6 | S1235 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | G56021 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | S1316 | 🇺🇸 US 🇨🇦 CA | CAM | View on Amazon |
This table covers the Timing Cam sprockets.
6 Timing Cam Sprocket parts are listed for the 2008 Kia Sorento, from CLOYES, ULTRA-POWER, KIA and 3 other brands. CLOYES S1076 carries the "Popular" badge.
Part numbers include CLOYES S1076, ULTRA-POWER VCTA1002I and KIA 231223C100, among others listed above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.8L V6 | 1045 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.8L V6 | C771 | 🇺🇸 US 🇨🇦 CA | Center Upper | View on Amazon |
| INA Fits: 3.8L V6 | ZCC771 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | C7178 | 🇺🇸 US 🇨🇦 CA | UpperPrimary Timing Chain | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | C1042 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
5 Timing Chain parts for the 2008 Kia Sorento come from 5 brands — MELLING, CLOYES, INA and 2 other brands. The "Popular" part is MELLING 1045.
This group includes MELLING 1045, CLOYES C771 and INA ZCC771 and the remaining parts above.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 3.8L V6 | CHK176 | 🇺🇸 US 🇨🇦 CA | Includes 3 Timing Chains, 3 Tensioners, 7 Guides, 5 Sprockets | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | TS21178 | 🇺🇸 US 🇨🇦 CA | Sprockets and Tensioners Not Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | TS21178T | 🇺🇸 US 🇨🇦 CA | Tensioners IncludedSprockets Not Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | TS11178A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.8L V6 | 76263S | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 2 Chains, 4 Guides, 2 Tensioner Arms, 2 Tensioners | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | 76263 | 🇺🇸 US 🇨🇦 CA | Includes 2 Camshaft Sprockets, 3 Chains, 2 Crank Sprockets, 5 Guides, Oil Pump Sprocket, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| ULTRA-POWER Fits: 3.8L V6 | 90771S | 🇺🇸 US 🇨🇦 CA | Sprockets Included | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.8L V6 | 90771SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes: Timing Chain (2), Oil Pump Chain, Timing Chain Tensioner (2), Oil Pump Chain Tensioner, Timing Chain Guide (4), Oil Pump Chain Guide, Timing Chain Tensioner Guide (2) | View on Amazon |
| CLOYES Popular Fits: 3.8L V6 | 90771S | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain (2), Oil Pump Chain, Timing Chain Tensioner (2), Oil Pump Chain Tensioner, Timing Chain Guide (4), Oil Pump Chain Guide, Timing Chain Tensioner Guide (2), Crankshaft Sprocket (2), Camshaft Sprocket (2), Oil Pump Sprocket | View on Amazon |
| ENGINETECH Popular Fits: 3.8L V6 | TS1178 | 🇺🇸 US | without sprockets or hydraulic tensionersFor tensioners | View on Amazon |
| INA Fits: 3.8L V6 | ZC90771SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 2 Chains, 2 Tensioner Arms, 2 Tensioners, 4 Guides | View on Amazon |
| INA Fits: 3.8L V6 | ZC90771S | 🇺🇸 US 🇨🇦 CA | Includes 3 Chains, 2 CAM Sprocket, 2 Crank Sprocket, 2 Tensioner Arms, 5 Guides, 1 Oil Pump Sprocket, 3 Tensioners | View on Amazon |
| MELLING Fits: 3.8L V6 | 31045SX | 🇺🇸 US 🇨🇦 CA | Does Not Include Sprockets | View on Amazon |
| MELLING Fits: 3.8L V6 | 31045S | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
14 Timing Chain & Component Kit parts are listed for the 2008 Kia Sorento, from PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 5 other brands. CLOYES 90771SX carries the "Popular" badge.
Economy: 7 parts, from PREFERRED COMPONENTS INC, S.A. GEAR, GATES and 1 other brand. A representative part number is GATES CHK176.
The Standard Replacement section: 7 options from CLOYES, INA, MELLING and 1 other brand. CLOYES 90771SX is listed in this group.
Timing Chain Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.8L V6 | B65110 | 🇺🇸 US 🇨🇦 CA | with Crankshaft Seal | View on Amazon |
This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING B65110.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.8L V6 | BG7002 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| MELLING Popular Fits: 3.8L V6 | BG7000 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| MELLING Popular Fits: 3.8L V6 | BT7001 | 🇺🇸 US 🇨🇦 CA | Tensioner Arm | View on Amazon |
| S.A. GEAR Popular Fits: 3.8L V6 | 71087 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| AUTO 7 Fits: 3.8L V6 | 6370011 | 🇺🇸 US 🇨🇦 CA | SIDE | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0241415 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0241394 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| CLOYES Fits: 3.8L V6 | 95883 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 3.8L V6 | 95884 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 3.8L V6 | 95882 | 🇺🇸 US 🇨🇦 CA | Tensioner Arm | View on Amazon |
| HYUNDAI Fits: 3.8L V6 | 244713C100 | 🇺🇸 US 🇨🇦 CA | Oil Pump | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | R76101 | 🇺🇸 US 🇨🇦 CA | Tensioner Arm | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | R76098 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | R76100 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | 71086 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | 91117 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmArm | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
16 Timing Chain Guide / Damper parts for the 2008 Kia Sorento come from 7 brands — MELLING, S.A. GEAR, CLOYES and 4 other brands. The "Popular" part is MELLING BG7002.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.8L V6 | TT003 | 🇺🇸 US | Hydraulic Ratcheting TypeTwo required | View on Amazon |
| MELLING Popular Fits: 3.8L V6 | BT5514 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 3.8L V6 | 0241392 | 🇺🇸 US 🇨🇦 CA | RAILCrank To Cam | View on Amazon |
| CLOYES Fits: 3.8L V6 | 95559 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.8L V6 | ZT91119 | 🇺🇸 US 🇨🇦 CA | Mechanical | View on Amazon |
| INA Fits: 3.8L V6 | ZT95885 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | T66333 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | T66003 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Fits: 3.8L V6 | 91119 | 🇺🇸 US 🇨🇦 CA | OIL PUMP MECHANICAL | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | 91118 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
10 Timing Chain Tensioner parts are listed for the 2008 Kia Sorento, from INA, PREFERRED COMPONENTS INC, S.A. GEAR and 4 other brands. ENGINETECH TT003 carries the "Popular" badge.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.8L V6 | 935810 | 🇺🇸 US 🇨🇦 CA | Fits or RWD | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | JV5151 | 🇺🇸 US 🇨🇦 CA | Includes Seal and GasketsSet | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Timing Cover Gasket parts are listed for the 2008 Kia Sorento, from ELRING and MAHLE / CLEVITE.
This group includes ELRING 935810 and MAHLE / CLEVITE JV5151.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 3.8L V6 | 17763 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2008 Kia Sorento — SKF 17763.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.8L V6 | S1236 | 🇺🇸 US 🇨🇦 CA | Inner | View on Amazon |
| MELLING Popular Fits: 3.8L V6 | S1237 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| S.A. GEAR Popular Fits: 3.8L V6 | S1318 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| CLOYES Fits: 3.8L V6 | S1079 | 🇺🇸 US 🇨🇦 CA | Inner | View on Amazon |
| CLOYES Fits: 3.8L V6 | S1077 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| HYUNDAI Fits: 3.8L V6 | 231213C100 | 🇺🇸 US 🇨🇦 CA | Inner | View on Amazon |
| INA Fits: 3.8L V6 | ZSS1079 | 🇺🇸 US 🇨🇦 CA | Inner | View on Amazon |
| INA Fits: 3.8L V6 | ZSS1077 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | G56023 | 🇺🇸 US 🇨🇦 CA | Inner | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.8L V6 | G56022 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| S.A. GEAR Fits: 3.8L V6 | S1317 | 🇺🇸 US 🇨🇦 CA | Inner | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
11 Timing Crank Sprocket parts are listed for the 2008 Kia Sorento, from MELLING, S.A. GEAR, CLOYES and 3 other brands. MELLING S1236 carries the "Popular" badge.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.8L V6 | 263918 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the Valve covers.
This group shows a single part: DORMAN 263918.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.8L V6 | VS50750R | 🇺🇸 US 🇨🇦 CA | Intake Manifold Upper set not includedPermadry Molded Rubber | View on Amazon |
| FEL-PRO Popular Fits: 3.8L V6 | VS50750R1 | 🇺🇸 US 🇨🇦 CA | Permadry Molded RubberIncludes Intake manifold upper set, Spark Plug Tube Seals | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.8L V6 | VS50560A | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| ULTRA-POWER Popular Fits: 3.8L V6 | VS50750R | 🇺🇸 US 🇨🇦 CA | SetIntake Manifold Upper set not included | View on Amazon |
| AJUSA Fits: 3.8L V6 | 11120500 | 🇺🇸 US 🇨🇦 CA | Includes Spark Plug Tube Seals | View on Amazon |
| AJUSA Fits: 3.8L V6 | 56049000 | 🇺🇸 US 🇨🇦 CA | LeftEngine # G6DA | View on Amazon |
| AJUSA Fits: 3.8L V6 | 56049100 | 🇺🇸 US 🇨🇦 CA | Complete Set | View on Amazon |
| APEX Fits: 3.8L V6 | AVC293S | 🇺🇸 US 🇨🇦 CA | Includes Spark Plug Tube Seals | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0361693 | 🇺🇸 US 🇨🇦 CA | Includes Spark Plug Tube Seals | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0361696 | 🇺🇸 US 🇨🇦 CA | Includes Spark Plug Tube Seals | View on Amazon |
| ELRING Fits: 3.8L V6 | 082300 | 🇺🇸 US 🇨🇦 CA | Fits Left | View on Amazon |
| ELRING Fits: 3.8L V6 | 082290 | 🇺🇸 US 🇨🇦 CA | Fits Right | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | VS50560 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 711060310 | 🇺🇸 US 🇨🇦 CA | Material: ACM | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 711060400 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| VICTOR REINZ Fits: 3.8L V6 | 151011001 | 🇺🇸 US 🇨🇦 CA | SetIncludes Spark Plug Tube Seals | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
16 Valve Cover Gasket parts are listed for the 2008 Kia Sorento, from AJUSA, VICTOR REINZ, FEL-PRO and 5 other brands. FEL-PRO VS50750R carries the "Popular" badge.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 3.8L V6 | 303152 | 🇺🇸 US 🇨🇦 CA | Intake1.655 OAL. 0.2168 I.D. | View on Amazon |
| SBI Fits: 3.8L V6 | 1403152 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2168 I.D. | View on Amazon |
| TOPLINE Fits: 3.8L V6 | VGHY14 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
3 Valve Guide parts are listed for the 2008 Kia Sorento, from QUALCAST, SBI and TOPLINE.
Part numbers include QUALCAST 303152, SBI 1403152 and TOPLINE VGHY14.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: 3.8L V6 | 222263CCC0 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2008 Kia Sorento — HYUNDAI 222263CCC0.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DURA-BOND Fits: 3.8L V6 | 30712 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
| SBI Fits: 3.8L V6 | SB131259 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Aluminum Cylinder Head | View on Amazon |
| SBI Fits: 3.8L V6 | SB150056 | 🇺🇸 US 🇨🇦 CA | High ChromeFor Aluminum Cylinder Head | View on Amazon |
This table covers the Valve seats.
3 Valve Seat parts for the 2008 Kia Sorento come from 2 brands — SBI and DURA-BOND.
This group includes DURA-BOND 30712, SBI SB131259 and SBI SB150056.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: 3.8L V6 | 222213CAA0 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.8L V6 | VS2286 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
2 Valve Spring parts for the 2008 Kia Sorento come from 2 brands — HYUNDAI and MELLING.
Listed part numbers: HYUNDAI 222213CAA0 and MELLING VS2286.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: 3.8L V6 | 2222302500 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.8L V6 | VL1060 | 🇺🇸 US 🇨🇦 CA | Valve Stem Diameter: 0.215 in | View on Amazon |
| QUALCAST Fits: 3.8L V6 | 345008 | 🇺🇸 US 🇨🇦 CA | 1 Round Groove. 0.215 Stem DIA. | View on Amazon |
| SBI Fits: 3.8L V6 | 1211060 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2190 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
4 Valve Spring Retainer Keeper parts for the 2008 Kia Sorento come from 4 brands — HYUNDAI, MELLING, QUALCAST and 1 other brand.
Listed part numbers: HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008, plus the other parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 3.8L V6 | 12025500 | 🇺🇸 US 🇨🇦 CA | 4.5 x 10.8 x 19.8Engine # G6DA | View on Amazon |
| APEX Popular Fits: 3.8L V6 | AVS2093 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.8L V6 | SS72298 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| AJUSA Fits: 3.8L V6 | 57062800 | 🇺🇸 US 🇨🇦 CA | Engine # G6DA | View on Amazon |
| AUTO 7 Fits: 3.8L V6 | 6190368 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.8L V6 | 440140 | 🇺🇸 US 🇨🇦 CA | Fits or RWD | View on Amazon |
| MAHLE / CLEVITE Fits: 3.8L V6 | SS46017 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 3.8L V6 | 38610355 | 🇺🇸 US 🇨🇦 CA | Viton Metal Clad | View on Amazon |
| SBI Fits: 3.8L V6 | 1221444 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| TOPLINE Fits: 3.8L V6 | VSSHY14 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.8L V6 | 121069001 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Valve Stem Seal parts are listed for the 2008 Kia Sorento, from AJUSA, APEX, FEL-PRO and 7 other brands. AJUSA 12025500 carries the "Popular" badge.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.8L V6 | SK918023 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| SKP Popular Fits: 3.8L V6 | SK918039 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ULTRA-POWER Popular Fits: 3.8L V6 | 918023 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| DORMAN Fits: 3.8L V6 | 918039 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| DORMAN Fits: 3.8L V6 | 918023 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | VVA1046 | 🇺🇸 US 🇨🇦 CA | Timing SolenoidIntake-Left | View on Amazon |
| FAMOUS BRAND Fits: 3.8L V6 | VVA1051 | 🇺🇸 US 🇨🇦 CA | Timing SolenoidIntake-Right | View on Amazon |
| GATES Fits: 3.8L V6 | VVS174 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| GATES Fits: 3.8L V6 | VVS175 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| HOLSTEIN Fits: 3.8L V6 | 2VTS0115 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| HOLSTEIN Fits: 3.8L V6 | 2VTS0117 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ROSTRA Fits: 3.8L V6 | 790058 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ROSTRA Fits: 3.8L V6 | 790052 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| SPECTRA PREMIUM Fits: 3.8L V6 | VTS1021 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| SPECTRA PREMIUM Fits: 3.8L V6 | VTS1022 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| WALKER PRODUCTS Fits: 3.8L V6 | 5901050 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| WALKER PRODUCTS Fits: 3.8L V6 | 5901065 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| WELLS Fits: 3.8L V6 | 2T1109 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| WELLS Fits: 3.8L V6 | 2T1113 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HL MANDO Popular Fits: 3.8L V6 | 22A1158 | 🇺🇸 US 🇨🇦 CA | New | View on Amazon |
| HYUNDAI Popular Fits: 3.8L V6 | 243553C200 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| HYUNDAI Popular Fits: 3.8L V6 | 243553C100 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A530127 | 🇺🇸 US 🇨🇦 CA | Leftwith OE No. 243553C100 | View on Amazon |
| ACKOJA Fits: 3.8L V6 | A530126 | 🇺🇸 US 🇨🇦 CA | Rightwith OE No. 243553C200 | View on Amazon |
| AISIN Fits: 3.8L V6 | OCVK007 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| AISIN Fits: 3.8L V6 | OCVK008 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0241966 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| BECK/ARNLEY Fits: 3.8L V6 | 0241967 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| CARDONE Fits: 3.8L V6 | 7V7010 | 🇺🇸 US 🇨🇦 CA | Engine Variable Valve Timing (VVT) Solenoid | View on Amazon |
| CARDONE Fits: 3.8L V6 | 7V7009 | 🇺🇸 US 🇨🇦 CA | Engine Variable Valve Timing (VVT) Solenoid | View on Amazon |
| CLOYES Fits: 3.8L V6 | VTS190 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| CLOYES Fits: 3.8L V6 | VTS206 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| HL MANDO Fits: 3.8L V6 | 22A1163 | 🇺🇸 US 🇨🇦 CA | New | View on Amazon |
| MELLING Fits: 3.8L V6 | VCTS1002L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| MELLING Fits: 3.8L V6 | VCTS1002R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.8L V6 | VVT118 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.8L V6 | VVT119 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
37 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2008 Kia Sorento, from SKP, DORMAN, FAMOUS BRAND and 16 other brands. SKP SK918023 carries the "Popular" badge. Economy and Standard Replacement are all represented, and Economy alone accounts for 19 parts.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.8L V6 | ECP1002I | 🇺🇸 US | IntakeOne Per engine | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
One part is listed for the 2008 Kia Sorento — ENGINETECH ECP1002I.
Buying Engine Parts for a 2008 Kia Sorento
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2008 Kia Sorento?
Our catalog currently lists 483 engine parts for the 2008 Kia Sorento across 58 subcategories and 76 brands, covering both the 3.3L V6 and the 3.8L V6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2008 Kia Sorento engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2008 Kia Sorento?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2008 Kia Sorento?
Oil rows on this page include SAE 0W-20, SAE 0W-30, SAE 5W-20, SAE 5W-30, SAE 5W-40 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Kia Sorento was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Kia Sorento?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Kia Sorento
Engine Parts for Other Kia Sorento Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.