2009 Kia Borrego Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

TIMKEN supplies both parts for the 2009 Kia Borrego. All of them fit every engine offered in the 2009 Borrego.

Part numbers include TIMKEN SL260188 and TIMKEN SL260189.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

5 CV Axle parts are listed for the 2009 Kia Borrego, from GSP, TOP NOTCH and TRAKMOTIVE. GSP NCV37105 carries the "Popular" badge. All of them fit every engine offered in the 2009 Borrego.

This group includes GSP NCV37105, GSP NCV37104 and TOP NOTCH TN60221 and the remaining parts above.

This table covers the bearings and races on the differential pinion. Read more

11 Differential Pinion Bearing / Race parts for the 2009 Kia Borrego come from 6 brands — TIMKEN, WJB / INMOTION PARTS, NATIONAL and 3 other brands. The "Popular" part is WJB / INMOTION PARTS WT30306. Every part fits both the 3.8L V6 and the 4.6L V8.

The Economy section lists 2 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT30306 is listed in this group.

In the Standard Replacement grade, TIMKEN, NATIONAL, BCA and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is NATIONAL 32307.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

8 Drive Shaft parts for the 2009 Kia Borrego come from 2 brands — DORMAN and WJB / INMOTION PARTS.

Part numbers include DORMAN 976420, DORMAN 976418 and DORMAN 976421, among others listed above.

This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2009 Kia Borrego — ELRING B15590.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

11 Gear Oil parts are listed for the 2009 Kia Borrego, from VALVOLINE and IDEMITSU. VALVOLINE VV820 carries the "Popular" badge. 10 parts fit every engine; the other 1 is engine-specific.

In the SAE 75W-90 grade, VALVOLINE supplies 6 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV820.

In the SAE 80W-90 grade, VALVOLINE supplies 4 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV831.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

19 Transfer Case Fluid parts are listed for the 2009 Kia Borrego, from VALVOLINE, ACDELCO, MOBIL and 1 other brand. ACDELCO 109243 carries the "Popular" badge. All of them fit every engine offered in the 2009 Borrego.

In the Dexron grade, VALVOLINE, ACDELCO and MOBIL supply 7 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Mercon grade, VALVOLINE supplies 1 part: grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 822345.

In the Multi-Vehicle grade, VALVOLINE and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the Type III (H) grade, ACDELCO supplies 2 parts: grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109240.

In the Type T-4 (Type T-IV) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040093750.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Input Shaft Bearing parts are listed for the 2009 Kia Borrego, from WJB / INMOTION PARTS, SCHAEFFLER and SKF. All of them fit every engine offered in the 2009 Borrego.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6209N.

The Standard Replacement section: 2 options from SCHAEFFLER and SKF. SCHAEFFLER 6209 is listed in this group.

Part numbers include WJB / INMOTION PARTS RB6209N, SCHAEFFLER 6209 and SKF 6209J.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Input Shaft Seal parts for the 2009 Kia Borrego come from 4 brands — WJB / INMOTION PARTS, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 710682. Every part fits both the 3.8L V6 and the 4.6L V8.

This group includes NATIONAL 710682, BCA NS710682 and SKF 17348A and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts are listed for the 2009 Kia Borrego, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2009 Borrego.

Listed part numbers: BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Transfer Case Output Shaft Seal parts are listed for the 2009 Kia Borrego, from NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand. NATIONAL 710403 carries the "Popular" badge. All of them fit every engine offered in the 2009 Borrego.

This group includes NATIONAL 710403, WJB / INMOTION PARTS WS710403 and BCA NS710661 and the remaining parts above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Shift Shaft Seal parts for the 2009 Kia Borrego come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.8L V6 and the 4.6L V8.

Listed part numbers: NATIONAL 330385 and WJB / INMOTION PARTS WS330385.