28 Drivetrain parts are listed for the 2011 Kia Borrego, in 9 part types, covering both the 3.8L V6 and the 4.6L V8. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2011 Kia Borrego, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Transfer Case Output Shaft Seal (7 parts), Differential Pinion Bearing / Race (6 parts) and Drive Shaft (4 parts). The other 6 part types cover the remaining 11 parts.
The 2011 Kia Borrego was sold with both the 3.8L V6 and the 4.6L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2011 Kia Borrego drivetrain parts are WJB / INMOTION PARTS (10 parts), NATIONAL (7 parts) and BCA (6 parts), plus 4 more brands. Quality grades include Standard Replacement and Economy.
4 parts on this 2011 Kia Borrego page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including WJB / INMOTION PARTS WT30306 (Differential Pinion Bearing / Race) and NATIONAL 710403 (Transfer Case Output Shaft Seal). Click any part number to see every vehicle that part fits.
CV Axle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRAKMOTIVE Fits: 4.6L V8 | KA86048 | 🇨🇦 CA | Rear | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
This group shows a single part: TRAKMOTIVE KA86048.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 4.6L V8 | WT30306 | 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WT32307 | 🇨🇦 CA | Front Inner4WD | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.6L V8 | 32307 | 🇨🇦 CA | Front Inner4WD | View on Amazon |
| BCA Fits: 4.6L V8 | NB30306 | 🇨🇦 CA | Taper Bearing SetIncludes Cup and Cone | View on Amazon |
| BCA Fits: 4.6L V8 | NB32307 | 🇨🇦 CA | Front Inner | View on Amazon |
| NATIONAL Fits: 4.6L V8 | 30306 | 🇨🇦 CA | Bearing & Race Set | View on Amazon |
This table covers the bearings and races on the differential pinion.
6 Differential Pinion Bearing / Race parts are listed for the 2011 Kia Borrego, from WJB / INMOTION PARTS, NATIONAL and BCA. WJB / INMOTION PARTS WT30306 carries the "Popular" badge.
In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WT30306.
The Standard Replacement section lists 4 options from NATIONAL and BCA — built to original-equipment specification. NATIONAL 32307 is listed in this group.
Part numbers include WJB / INMOTION PARTS WT30306, WJB / INMOTION PARTS WT32307 and NATIONAL 32307, among others listed above.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.6L V8 | 976421 | 🇨🇦 CA | Length: 51.25" | View on Amazon |
| DORMAN Fits: 4.6L V8 | 976419 | 🇨🇦 CA | Length: 65.625" | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WDS76419 | 🇨🇦 CA | RearRWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WDS76421 | 🇨🇦 CA | Rear4WD | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
4 Drive Shaft parts are listed for the 2011 Kia Borrego, from DORMAN and WJB / INMOTION PARTS.
Listed part numbers: DORMAN 976421, DORMAN 976419 and WJB / INMOTION PARTS WDS76419, plus the other parts above.
Drive Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.6L V8 | B15590 | 🇨🇦 CA | RWDEX Model | View on Amazon |
This table covers the seals at the Drive Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING B15590.
Transfer Case Input Shaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 4.6L V8 | RB6209N | 🇨🇦 CA | 4WD | View on Amazon |
This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: WJB / INMOTION PARTS RB6209N.
Transfer Case Input Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 4.6L V8 | NS710682 | 🇨🇦 CA | with Borg Warner 4428 Transfer Casewith Part Time 4WD | View on Amazon |
| NATIONAL Fits: 4.6L V8 | 710682 | 🇨🇦 CA | 4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS710682 | 🇨🇦 CA | 4WD | View on Amazon |
This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Transfer Case Input Shaft Seal parts are listed for the 2011 Kia Borrego, from BCA, NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: BCA NS710682, NATIONAL 710682 and WJB / INMOTION PARTS WS710682.
Transfer Case Output Shaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 4.6L V8 | NS99189 | 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Fits: 4.6L V8 | 99189 | 🇨🇦 CA | Front4WD | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS99189 | 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface.
3 Transfer Case Output Shaft Repair Sleeve parts for the 2011 Kia Borrego come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 4.6L V8 | 710403 | 🇨🇦 CA | Rear4WD | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 4.6L V8 | WS710403 | 🇨🇦 CA | Rear4WD | View on Amazon |
| BCA Fits: 4.6L V8 | NS710661 | 🇨🇦 CA | Frontwith Borg Warner 4428 Transfer Case | View on Amazon |
| BCA Fits: 4.6L V8 | NS710403 | 🇨🇦 CA | Rearwith Borg Warner 4428 Transfer Case | View on Amazon |
| NATIONAL Fits: 4.6L V8 | 710661 | 🇨🇦 CA | Front4WD | View on Amazon |
| SCHAEFFLER Fits: 4.6L V8 | SS2707 | 🇨🇦 CA | Rear1.62" I:D X 2.45" O.D. X 0.47" Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS710661 | 🇨🇦 CA | Front4WD | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
7 Transfer Case Output Shaft Seal parts for the 2011 Kia Borrego come from 4 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 1 other brand. The "Popular" part is NATIONAL 710403.
This group includes NATIONAL 710403, WJB / INMOTION PARTS WS710403 and BCA NS710661 and the remaining parts above.
Transfer Case Shift Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: 4.6L V8 | 330385 | 🇨🇦 CA | 4WDwith Borg-Warner 4428 Transfer Case | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.6L V8 | WS330385 | 🇨🇦 CA | 4WD | View on Amazon |
This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Transfer Case Shift Shaft Seal parts are listed for the 2011 Kia Borrego, from NATIONAL and WJB / INMOTION PARTS.
Listed part numbers: NATIONAL 330385 and WJB / INMOTION PARTS WS330385.
Buying Drivetrain Parts for a 2011 Kia Borrego
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Transfer Case Output Shaft Seal and Differential Pinion Bearing / Race .
Frequently Asked Questions
How many drivetrain parts fit the 2011 Kia Borrego?
Our catalog currently lists 28 drivetrain parts for the 2011 Kia Borrego across 9 subcategories and 7 brands, covering both the 3.8L V6 and the 4.6L V8. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2011 Kia Borrego engines?
Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2011 Kia Borrego?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Kia Borrego was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 Kia Borrego?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 Kia Borrego
Drivetrain Parts for Other Kia Borrego Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.