2009 Kia Borrego Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2009 Kia Borrego — AUTO 7 6150220.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2009 Kia Borrego, from AUTO 7, ENGINETECH and TOPLINE.

This group includes AUTO 7 6010277, AUTO 7 6010278 and AUTO 7 6010279 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2009 Kia Borrego, from AJUSA, APEX, ENGINETECH and 1 other brand.

This group includes AJUSA 54179100, AJUSA 54311600 and APEX ACS11095 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2009 Kia Borrego come from 3 brands — TOPLINE, AUTO 7 and ENGINETECH.

Part numbers include AUTO 7 6020081, ENGINETECH BC1034 and TOPLINE TWHY14, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2009 Kia Borrego come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Crankshaft Seal parts for the 2009 Kia Borrego come from 9 brands — FEL-PRO, APEX, ELRING and 6 other brands. The "Popular" part is FEL-PRO TCS46111. 5 parts fit every engine; the other 8 are engine-specific.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Kia Borrego — ELRING 476430.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts are listed for the 2009 Kia Borrego, from AJUSA, APEX, FEL-PRO and 4 other brands. APEX AHB293 carries the "Popular" badge.

Part numbers include APEX AHB293, FEL-PRO ES72366 and AJUSA 81056400, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

21 Cylinder Head Gasket parts are listed for the 2009 Kia Borrego, from AJUSA, APEX, FEL-PRO and 5 other brands. APEX AHG1150R carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 2009 Kia Borrego, from AJUSA, FEL-PRO, APEX and 1 other brand. AJUSA 52349600 carries the "Popular" badge.

Part numbers include AJUSA 52349600, AJUSA 52579200 and APEX AHS11095, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2009 Kia Borrego come from KAT'S HEATERS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: KAT'S HEATERS 11479 and KAT'S HEATERS 11812.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2009 Kia Borrego, from AJUSA, ELRING and ENGINETECH.

This group includes AJUSA 50313700, AJUSA 50527800 and ELRING 659480 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 2009 Kia Borrego come from 6 brands — MELLING, QUALCAST, TOPLINE and 3 other brands. The "Popular" part is HYUNDAI 222123F300.

This group includes HYUNDAI 222123F300, AUTO 7 6130093 and MELLING V3287 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

11 Harmonic Balancer parts are listed for the 2009 Kia Borrego, from DORMAN, HL MANDO, ATP and 4 other brands. DORMAN 594294 carries the "Popular" badge.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Intake Manifold Gasket parts are listed for the 2009 Kia Borrego, from BECK/ARNLEY, AJUSA, MAHLE / CLEVITE and 6 other brands. BECK/ARNLEY 0376211 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2009 Kia Borrego come from 5 brands — FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. The "Popular" part is FEL-PRO MS97099.

This group includes FEL-PRO MS97099, APEX AMS11950 and BECK/ARNLEY 0374871 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Intake Valve parts for the 2009 Kia Borrego come from 6 brands — MELLING, QUALCAST, TOPLINE and 3 other brands. The "Popular" part is MELLING V3286.

Listed part numbers: MELLING V3286, ENGINETECH IM4468 and HYUNDAI 222113F300, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2009 Kia Borrego come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. Every part fits both the 3.8L V6 and the 4.6L V8.

This group includes ANCHOR 9329, DEA / MARMON RIDE CONTROL A7180 and PIONEER 607180 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300371.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

88 Oil parts for the 2009 Kia Borrego come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 20228. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, IDEMITSU and 2 other brands.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2009 Kia Borrego come from 2 brands — AUTOTECNICA and DORMAN.

Listed part numbers: AUTOTECNICA KI1421512 and DORMAN 921200.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2009 Kia Borrego come from 5 brands — DORMAN, AGS, ENGINETECH and 2 other brands. The "Popular" part is DORMAN 090033. Every part fits both the 3.8L V6 and the 4.6L V8.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts are listed for the 2009 Kia Borrego, from DORMAN, FEL-PRO, ACKOJA and 2 other brands. DORMAN 095147 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

This group includes DORMAN 095147, DORMAN 095144 and FEL-PRO 73346 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2009 Kia Borrego come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand. Every part fits both the 3.8L V6 and the 4.6L V8.

Listed part numbers: CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2009 Kia Borrego — ELRING 453020.