2010 Kia Borrego Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2010 Kia Borrego, from AJUSA, ENGINETECH and FEL-PRO.

Listed part numbers: AJUSA 54179100, AJUSA 54311600 and ENGINETECH HY38CSB, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2010 Kia Borrego come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts for the 2010 Kia Borrego come from 7 brands — AJUSA, FEL-PRO, ELRING and 4 other brands. The "Popular" part is FEL-PRO TCS46111. 1 part fits every engine; the other 11 are engine-specific.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2010 Kia Borrego — ELRING 476430.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2010 Kia Borrego, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 81056400, AJUSA 81079600 and FEL-PRO ES72366, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Cylinder Head Gasket parts are listed for the 2010 Kia Borrego, from AJUSA, FEL-PRO, ELRING and 2 other brands. AJUSA 10192500 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts are listed for the 2010 Kia Borrego, from AJUSA, FEL-PRO, ELRING and 1 other brand. AJUSA 52349600 carries the "Popular" badge.

Listed part numbers: AJUSA 52349600, AJUSA 52579200 and ELRING 864460, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2010 Kia Borrego come from KAT'S HEATERS.

Part numbers include KAT'S HEATERS 11812 and KAT'S HEATERS 11479.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2010 Kia Borrego, from AJUSA and ELRING.

Part numbers include AJUSA 50313700, AJUSA 50527800 and ELRING 659480.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2010 Kia Borrego come from 3 brands — QUALCAST, MELLING and SBI.

Part numbers include MELLING V5570, QUALCAST 1013287 and QUALCAST 1010570, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

10 Harmonic Balancer parts are listed for the 2010 Kia Borrego, from DORMAN, HL MANDO, DAYCO and 4 other brands. DORMAN 594294 carries the "Popular" badge.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts are listed for the 2010 Kia Borrego, from MAHLE / CLEVITE, ELRING, FEL-PRO and 2 other brands. FEL-PRO MS970861 carries the "Popular" badge.

This group includes FEL-PRO MS970861, MAHLE / CLEVITE MS19730 and AJUSA 13320400 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts for the 2010 Kia Borrego come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO MS97099, MAHLE / CLEVITE MS19705 and VICTOR REINZ 151079101.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts for the 2010 Kia Borrego come from 3 brands — QUALCAST, MELLING and SBI.

Part numbers include MELLING V5569, QUALCAST 1013286 and QUALCAST 1010569, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2010 Kia Borrego come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. Every part fits both the 3.8L V6 and the 4.6L V8.

Part numbers include ANCHOR 9329, DEA / MARMON RIDE CONTROL A7180 and PIONEER 607180, among others listed above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300371.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

9 Oil parts for the 2010 Kia Borrego come from 2 brands — VALVOLINE and PENTOSIN. The "Popular" part is VALVOLINE 849644. Every part fits both the 3.8L V6 and the 4.6L V8.

The Full Synthetic section lists 5 options from PENTOSIN and VALVOLINE — full-synthetic oils. PENTOSIN 8044218 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE supplies 2 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE 849644.

The Synthetic Blend section lists 2 options from VALVOLINE — synthetic-blend oils. VALVOLINE 797974 is listed in this group.

This group includes VALVOLINE 849644, PENTOSIN 8044218 and PENTOSIN 8078106 and the remaining parts above.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 921200.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2010 Kia Borrego come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2010 Kia Borrego, from ACKOJA, AJUSA, ELRING and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

This group includes ACKOJA A532804, AJUSA 22007100 and ELRING 726760 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2010 Kia Borrego come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, among others listed above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2010 Kia Borrego — ELRING 453020.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

22 Oil Filter parts for the 2010 Kia Borrego come from 16 brands — CHAMP / LUBER-FINER, FVP, PRO-TEC and 13 other brands. The "Popular" part is MOBIL M1C255A. 15 parts fit every engine; the other 7 are engine-specific.

The Economy section lists 6 options from FVP, PRO-TEC, CHAMP / LUBER-FINER and 1 other brand — the catalog's value-priced group. CHAMP / LUBER-FINER P982 is listed in this group.

The High Performance / Heavy Duty section lists 3 options from MOBIL and ECOGARD — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C255A is listed in this group.

In the Standard Replacement grade, WIX, HASTINGS / BALDWIN, BOSCH and 8 other brands supply 13 parts: built to original-equipment specification. A representative part number is BOSCH 3848.

This table covers the Oil Filter covers. Read more

One part is listed for the 2010 Kia Borrego — DORMAN 921173.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2010 Kia Borrego, from HYUNDAI, ACKOJA, DORMAN and 2 other brands. HYUNDAI 215103C600 carries the "Popular" badge.

Part numbers include HYUNDAI 215103C600, ACKOJA A520446 and DORMAN 264435, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 2010 Kia Borrego come from 3 brands — VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO OS30825, MAHLE / CLEVITE OS32556 and VICTOR REINZ 711673300, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MELLING M513.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts are listed for the 2010 Kia Borrego, from PREFERRED COMPONENTS INC, CLOYES, MELLING and 1 other brand.

Economy: 1 part, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC C772.

The Standard Replacement section: 2 options from CLOYES and MELLING. CLOYES C772 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include PREFERRED COMPONENTS INC C772 and MELLING 1046, among others listed above.

This table covers the Oil Pump Chain guides. Read more

3 Oil Pump Chain Guide parts are listed for the 2010 Kia Borrego, from CLOYES, FVP and MELLING.

This group includes CLOYES 95886 and MELLING BG7001 and the remaining parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Oil Pump Chain Tensioner parts for the 2010 Kia Borrego come from 4 brands — CLOYES, FVP, MELLING and 1 other brand.

Part numbers include CLOYES 95885 and MELLING BT7000, among others listed above.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts are listed for the 2010 Kia Borrego, from CLOYES, FVP and MELLING.

This group includes CLOYES S1078 and MELLING S1238 and the remaining parts above.

This table covers the Timing Cam sprockets. Read more

This group shows a single part: MELLING S1235.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2010 Kia Borrego, from CLOYES, FVP, HYUNDAI and 1 other brand.

Listed part numbers: CLOYES C771 and HYUNDAI 243123C100, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2010 Kia Borrego come from CLOYES.

Part numbers include CLOYES 90771SX and CLOYES 90771SA.

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2010 Kia Borrego — ELRING B65110.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts are listed for the 2010 Kia Borrego, from MELLING and CLOYES. MELLING BG7000 carries the "Popular" badge.

Part numbers include MELLING BG7000, MELLING BT7001 and CLOYES 95883, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2010 Kia Borrego come from 2 brands — CLOYES and FVP.

Listed part numbers: CLOYES 95559, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts for the 2010 Kia Borrego come from 2 brands — ELRING and MAHLE / CLEVITE.

Listed part numbers: ELRING 935810 and MAHLE / CLEVITE JV5151.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

6 Timing Crank Sprocket parts for the 2010 Kia Borrego come from 3 brands — MELLING, CLOYES and FVP. The "Popular" part is MELLING S1236.

Part numbers include MELLING S1236, MELLING S1237 and CLOYES S1079, among others listed above.

This table covers the Valve covers. Read more

One part is listed for the 2010 Kia Borrego — DORMAN 263918.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Valve Cover Gasket parts for the 2010 Kia Borrego come from 5 brands — AJUSA, ELRING, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO VS50764R.

Listed part numbers: FEL-PRO VS50764R, MAHLE / CLEVITE VS50561 and AJUSA 56049000, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2010 Kia Borrego come from 2 brands — QUALCAST and SBI.

Listed part numbers: QUALCAST 303152 and SBI 1403152.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85023300.

This table covers the Valve seats. Read more

3 Valve Seat parts are listed for the 2010 Kia Borrego, from SBI and DURA-BOND.

Listed part numbers: DURA-BOND 30712, SBI SB131259 and SBI SB150056.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2010 Kia Borrego — MELLING VS2286.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2010 Kia Borrego, from MELLING, QUALCAST and SBI.

This group includes MELLING VL1060, QUALCAST 345008 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Valve Stem Seal parts for the 2010 Kia Borrego come from 7 brands — AJUSA, FEL-PRO, ELRING and 4 other brands. The "Popular" part is AJUSA 12025500.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

34 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2010 Kia Borrego come from 11 brands — WELLS, DORMAN, GATES and 8 other brands. The "Popular" part is DORMAN 918039. Grades run from Economy through Standard Replacement; Economy is the most populated section, led by WELLS, DORMAN, GATES and 4 other brands.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: GATES VCP850.