2011 Kia Rio Electrical Connector Parts

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 A/C Refrigerant Pressure Switch Connector parts for the 2011 Kia Rio come from 4 brands — FOUR SEASONS, GPD, STANDARD MOTOR PRODUCTS and 1 other brand.

Part numbers include FOUR SEASONS 37276, GPD 1712679 and STANDARD MOTOR PRODUCTS S2458, among others listed above.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 ABS Wheel Speed Sensor Connector parts are listed for the 2011 Kia Rio, from HOLSTEIN, FAMOUS BRAND, STANDARD MOTOR PRODUCTS and 2 other brands. HOLSTEIN 2ABS0666 carries the "Popular" badge.

Part numbers include HOLSTEIN 2ABS0666, HOLSTEIN 2ABS0917 and FAMOUS BRAND 1406517048, among others listed above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S2533.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S3205.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Blower Motor Control Module / Resistor Connector parts for the 2011 Kia Rio come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1519.

Listed part numbers: STANDARD MOTOR PRODUCTS S1519, WELLS 1P1789 and FOUR SEASONS 37257, plus the other parts above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1785.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 2 other brands. STANDARD MOTOR PRODUCTS HP3975 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS HP3975, WELLS 1P1421 and ROSTRA 610105 and the remaining parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts are listed for the 2011 Kia Rio, from WALKER PRODUCTS and WELLS.

Listed part numbers: WALKER PRODUCTS 2701034 and WELLS 1P1347.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Fog / Driving Lamp Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS, ACDELCO and WELLS.

This group includes ACDELCO PT2298, STANDARD MOTOR PRODUCTS HP3835 and STANDARD MOTOR PRODUCTS S553 and the remaining parts above.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts are listed for the 2011 Kia Rio, from GB REMANUFACTURING, STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include GB REMANUFACTURING 5187, STANDARD MOTOR PRODUCTS S2330 and WELLS 1P4050.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S2873.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3121.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS LWH109.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Ignition Coil Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, HYUNDAI and 3 other brands. STANDARD MOTOR PRODUCTS S1415 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS S1415, UNITED MOTOR PRODUCTS CON21 and HYUNDAI 2735026620 and the remaining parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Knock / Detonation Sensor Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS, SKP, ROSTRA and 2 other brands. SKP SKS1024 carries the "Popular" badge.

Listed part numbers: SKP SKS1024, STANDARD MOTOR PRODUCTS S1024 and ROSTRA 610584, plus the other parts above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2011 Kia Rio, from ROSTRA and WELLS.

Listed part numbers: ROSTRA 610351 and WELLS 1P2657.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1634.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S3134.

This table covers the harness connectors at the Power Window Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Radiator Fan Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S3282.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Radio Connector parts for the 2011 Kia Rio come from METRA.

Part numbers include METRA 707303, METRA AXUSBHK2 and METRA 7173031, among others listed above.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Speed Sensor Connector parts for the 2011 Kia Rio come from 2 brands — ROSTRA and WELLS.

Part numbers include ROSTRA 610105 and WELLS 1P1421.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S3094.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Throttle Position Sensor (TPS) Connector parts for the 2011 Kia Rio come from 4 brands — SKP, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

Part numbers include SKP SKS1038, STANDARD MOTOR PRODUCTS S1038 and UNITED MOTOR PRODUCTS CON7, among others listed above.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Connector parts for the 2011 Kia Rio come from 2 brands — CURT and HELLA.

Part numbers include CURT 56251 and HELLA 001909001.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS HP4625, STANDARD MOTOR PRODUCTS S1350 and STANDARD MOTOR PRODUCTS S1414, among others listed above.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Vapor Canister Vent Valve / Solenoid Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 1 other brand. STANDARD MOTOR PRODUCTS HP3860 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS HP3860, WELLS 1P1347 and ACDELCO PT2164 and the remaining parts above.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Variable Valve Timing (VVT) Solenoid Connector parts are listed for the 2011 Kia Rio, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1716, WALKER PRODUCTS 2701102 and WELLS 1P1680.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S2921.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Rio — STANDARD MOTOR PRODUCTS S3131.

This table covers the harness connectors at the Yaw Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1057.