2011 Kia Rio Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: HYUNDAI 2420026704.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

5 Camshaft Plug parts for the 2011 Kia Rio come from 5 brands — FEL-PRO, ELRING, HYUNDAI and 2 other brands. The "Popular" part is FEL-PRO CP75023.

Part numbers include FEL-PRO CP75023, ELRING 725780 and HYUNDAI 2232735504, among others listed above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2011 Kia Rio, from SCHAEFFLER, SKF and TIMKEN.

Part numbers include SCHAEFFLER SR3472, SKF 99139 and TIMKEN KWK99139.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts are listed for the 2011 Kia Rio, from ELRING, HYUNDAI, SKF and 7 other brands. HYUNDAI 2214421010 carries the "Popular" badge.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts are listed for the 2011 Kia Rio, from APEX and ELRING.

Part numbers include APEX ACP203 and ELRING 372780.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRHY2.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 2011 Kia Rio come from 3 brands — KING ENGINE BEARINGS, MAHLE / CLEVITE and TOPLINE.

Listed part numbers: KING ENGINE BEARINGS CR4655AM, MAHLE / CLEVITE CB1979A4 and TOPLINE RBHY2.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 2011 Kia Rio come from 7 brands — ELRING, FEL-PRO, ITM ENGINE COMPONENTS and 4 other brands. The "Popular" part is FEL-PRO CS262241.

Listed part numbers: FEL-PRO CS262241, ITM ENGINE COMPONENTS 0921905 and AJUSA 54130100, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts are listed for the 2011 Kia Rio, from AUTO 7, KING ENGINE BEARINGS and TOPLINE.

Listed part numbers: AUTO 7 6000263, AUTO 7 6000266 and KING ENGINE BEARINGS MB5022AM, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

19 Crankshaft Seal parts are listed for the 2011 Kia Rio, from ELRING, VICTOR REINZ, FEL-PRO and 8 other brands. ELRING 902760 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts for the 2011 Kia Rio come from 10 brands — ELRING, AJUSA, ENGINETECH and 7 other brands. The "Popular" part is AJUSA 81029900.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts for the 2011 Kia Rio come from 8 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 5 other brands. The "Popular" part is FEL-PRO 26224PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Cylinder Head Gasket Set parts for the 2011 Kia Rio come from 11 brands — ELRING, ENGINETECH, FEL-PRO and 8 other brands. The "Popular" part is ENGINETECH HY16HSB.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302190.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies the 3 Engine Block Heater parts for the 2011 Kia Rio.

This group includes KAT'S HEATERS 11485, KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2011 Kia Rio come from TECHPRO.

Part numbers include TECHPRO KI1228107 and TECHPRO KI1228108.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts for the 2011 Kia Rio come from 5 brands — ELRING, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH HY16K3.

This group includes ENGINETECH HY16K3, ITM ENGINE COMPONENTS 0900880 and AJUSA 50287500 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2011 Kia Rio, from HYUNDAI, ENGINETECH, MELLING and 3 other brands. HYUNDAI 2221226050 carries the "Popular" badge.

This group includes HYUNDAI 2221226050, HYUNDAI 2221226000 and ENGINETECH EM4421 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: TOPLINE EPSC11.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts for the 2011 Kia Rio come from 6 brands — SKP, HL MANDO, ATP and 3 other brands. The "Popular" part is SKP SK594053.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594053 is listed in this group.

In the Standard Replacement grade, HL MANDO, ATP, DAYCO and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is HL MANDO 30A5012.

Listed part numbers: SKP SK594053, HL MANDO 30A5012 and ATP 102152, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Intake Manifold Gasket parts for the 2011 Kia Rio come from 6 brands — ELRING, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is ELRING 310560.

Listed part numbers: ELRING 310560, FEL-PRO MS96331 and AJUSA 13224200, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 2011 Kia Rio, from HYUNDAI, MELLING, ENGINETECH and 3 other brands. HYUNDAI 2221126600 carries the "Popular" badge.

This group includes HYUNDAI 2221126600, MELLING V3047 and ENGINETECH IM4420 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts are listed for the 2011 Kia Rio, from SKP, ANCHOR, BECK/ARNLEY and 5 other brands. SKP SKM9309 carries the "Popular" badge.

Economy: 3 parts, from SKP. A representative part number is SKP SKM9309.

The Standard Replacement section: 16 options from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 4 other brands. HYUNDAI 219101G000 is listed in this group.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts are listed for the 2011 Kia Rio, from ANCHOR and WESTAR.

This group includes ANCHOR 300385 and WESTAR ETK071.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

100 Oil parts are listed for the 2011 Kia Rio, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. MOBIL 125195 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2011 Kia Rio come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

10 Oil Drain Plug parts are listed for the 2011 Kia Rio, from DORMAN, ELRING, ACKOJA and 3 other brands. DORMAN 090033 carries the "Popular" badge.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts for the 2011 Kia Rio come from 5 brands — DORMAN, ACKOJA, ELRING and 2 other brands. The "Popular" part is DORMAN 095147.

Part numbers include DORMAN 095147, DORMAN 095144 and ACKOJA A532804, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2011 Kia Rio, from CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts are listed for the 2011 Kia Rio, from BOSCH, VARIOUS MFR, WIX and 14 other brands. MOBIL M1104A carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FRAM, FVP and 2 other brands. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1104A.

The Standard Replacement section: 14 options from HYUNDAI, BOSCH, DENSO and 10 other brands. BOSCH 3312 is listed in this group.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Kia Rio — ELRING 453220.