2011 Kia Sorento Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260463.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

20 CV Axle parts for the 2011 Kia Sorento come from 5 brands — TRAKMOTIVE, GSP, TOP NOTCH and 2 other brands. The "Popular" part is TOP NOTCH TN60158. 16 parts fit every engine; the other 4 are engine-specific.

The Economy section lists 1 option from CARDONE — the catalog's value-priced group. CARDONE 603654 is listed in this group.

In the Standard Replacement grade, TRAKMOTIVE, GSP, TOP NOTCH and 2 other brands supply 19 parts: built to original-equipment specification. A representative part number is TOP NOTCH TN60158.

This table covers the CV Intermediate shafts. Read more

9 CV Intermediate Shaft parts are listed for the 2011 Kia Sorento, from TRAKMOTIVE, GSP, CARDONE and 1 other brand. GSP NEX37014 carries the "Popular" badge.

Listed part numbers: GSP NEX37014, GSP NEX37003 and CARDONE 663992IS, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2011 Kia Sorento come from 2 brands — BECK/ARNLEY and MEVOTECH. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: BECK/ARNLEY 1032968, BECK/ARNLEY 1032818 and MEVOTECH DX859, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

This group shows a single part: SKF BR30207.

This table covers the bearings and races on the differential pinion. Read more

4 Differential Pinion Bearing / Race parts are listed for the 2011 Kia Sorento, from SKF and SCHAEFFLER. All of them fit every engine offered in the 2011 Sorento.

Listed part numbers: SCHAEFFLER KM86649, SKF HM89410VP and SKF M86649610, plus the other parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260471.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

9 Drive Shaft parts are listed for the 2011 Kia Sorento, from DORMAN, GSP, TOP NOTCH and 3 other brands. DORMAN 976403 carries the "Popular" badge. 2 parts fit every engine; the other 7 are engine-specific.

This group includes DORMAN 976403, CARDONE 657063 and DORMAN 976412 and the remaining parts above.

This table covers the flex joints in the driveshaft. Read more

2 Drive Shaft Flex Joint parts for the 2011 Kia Sorento come from 2 brands — DORMAN and MOOG. 1 part fits every engine; the other 1 is engine-specific.

This group includes DORMAN 935516 and MOOG 676.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

13 Gear Oil parts for the 2011 Kia Sorento come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361. Every part fits both the 2.4L L4 and the 3.5L V6.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts for the 2011 Kia Sorento come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361. Every part fits both the 2.4L L4 and the 3.5L V6.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2011 Kia Sorento, from SKF and WJB / INMOTION PARTS. All of them fit every engine offered in the 2011 Sorento.

Part numbers include SKF 21252A and WJB / INMOTION PARTS WS21252A.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Transfer Case Output Shaft Bearing parts are listed for the 2011 Kia Sorento, from SKF and WJB / INMOTION PARTS.

Economy: 1 part, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTLM501310.

The Standard Replacement section: 2 options from SKF. SKF LM501310VP is listed in this group.

This group includes WJB / INMOTION PARTS WTLM501310, SKF LM501310VP and SKF BR35.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Transfer Case Output Shaft Seal parts for the 2011 Kia Sorento come from 4 brands — SKF, NATIONAL, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is SKF 13274A. 3 parts fit every engine; the other 8 are engine-specific.

This table covers the Transfer Case Overhaul kits. Read more

This group shows a single part: USA STANDARD GEAR ZTBK4424.

This table covers the viscous couplers in the AWD driveline. Read more

One part is listed for the 2011 Kia Sorento — HYUNDAI 4780024700.