2011 Kia Sorento Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: PREFERRED COMPONENTS INC C774.

This table covers the guides that keep the balance-shaft chain on its path. Read more

This group shows a single part: PREFERRED COMPONENTS INC R76139.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2011 Kia Sorento — PREFERRED COMPONENTS INC T66222.

This table covers the camshafts that open the valves. Read more

3 Camshaft parts for the 2011 Kia Sorento come from 2 brands — SKP and HYUNDAI.

Part numbers include HYUNDAI 241002G600, SKP SKES1560 and SKP SKES1559.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2011 Kia Sorento — ELRING 127610.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2011 Kia Sorento come from 2 brands — HYUNDAI and TOPLINE.

This group includes HYUNDAI 235103L100 and TOPLINE CRHY11.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts for the 2011 Kia Sorento come from 5 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 2 other brands. The "Popular" part is MAHLE / CLEVITE CB1950A4.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4634XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS, MAHLE / CLEVITE, TOPLINE and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB1950A4.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts for the 2011 Kia Sorento come from 6 brands — AJUSA, ENGINETECH, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ENGINETECH HY24CSC.

Part numbers include ENGINETECH HY24CSC, MAHLE / CLEVITE CS54741 and AJUSA 54243500, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2011 Kia Sorento come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH 884100 and TOPLINE CSHY11.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 2011 Kia Sorento, from TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 2 other brands. ENGINETECH BC1030 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5771XP.

The Standard Replacement section: 6 options from TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 2 other brands. ENGINETECH BC1030 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 2011 Kia Sorento, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. WJB / INMOTION PARTS WS99166 carries the "Popular" badge.

Part numbers include WJB / INMOTION PARTS WS99166, BCA NS99166 and BCA NS99177, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

46 Crankshaft Seal parts are listed for the 2011 Kia Sorento, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 12 other brands. BCA NS224200 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts for the 2011 Kia Sorento come from 8 brands — AJUSA, APEX, FEL-PRO and 5 other brands. The "Popular" part is AJUSA 81045900.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

21 Cylinder Head Gasket parts for the 2011 Kia Sorento come from 7 brands — FEL-PRO, AJUSA, APEX and 4 other brands. The "Popular" part is AJUSA 10198200.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Cylinder Head Gasket Set parts for the 2011 Kia Sorento come from 7 brands — ENGINETECH, AJUSA, FEL-PRO and 4 other brands. The "Popular" part is APEX AHS13047.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2011 Kia Sorento. 1 part fits every engine; the other 1 is engine-specific.

This group includes KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

4 Engine Cover parts for the 2011 Kia Sorento come from 2 brands — TECHPRO and HYUNDAI. 3 parts fit every engine; the other 1 is engine-specific.

This group includes HYUNDAI 292402G000, TECHPRO HY1228153 and TECHPRO HY1228154 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts for the 2011 Kia Sorento come from 4 brands — AJUSA, ENGINETECH, ELRING and 1 other brand. The "Popular" part is AJUSA 50313900.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts are listed for the 2011 Kia Sorento, from MELLING, QUALCAST, SBI and 3 other brands. ITM ENGINE COMPONENTS RX9973 carries the "Popular" badge.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2011 Kia Sorento come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS GDF401 and WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

14 Harmonic Balancer parts for the 2011 Kia Sorento come from 8 brands — DORMAN, SKP, ATP and 5 other brands. The "Popular" part is SKP SK594341.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SK594341 is listed in this group.

Standard Replacement: 5 parts, from DORMAN, ATP, DAYCO and 1 other brand. A representative part number is DORMAN 594341.

7 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

5 Intake Manifold parts are listed for the 2011 Kia Sorento, from DORMAN, ACKOJA, HYUNDAI and 2 other brands. DORMAN 615472 carries the "Popular" badge.

This group includes DORMAN 615472, ACKOJA A529639 and HYUNDAI 283103CAA0 and the remaining parts above.

This table covers the Intake Manifold actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Intake Manifold Actuator parts for the 2011 Kia Sorento come from 3 brands — DORMAN, SKP and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 911922, DORMAN 911994 and SKP SK911922, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts for the 2011 Kia Sorento come from 8 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 5 other brands. The "Popular" part is APEX AMS2922.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Intake Manifold Runner Control Valve / Solenoid parts for the 2011 Kia Sorento come from 4 brands — ACKOJA, DORMAN, SKP and 1 other brand.

Listed part numbers: ACKOJA A52630011, DORMAN 911934 and SKP SK913182, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Plenum Gasket parts are listed for the 2011 Kia Sorento, from AJUSA, FEL-PRO, APEX and 4 other brands. FEL-PRO MS97286 carries the "Popular" badge.

Listed part numbers: FEL-PRO MS97286, AJUSA 13240100 and AJUSA 13240200, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts are listed for the 2011 Kia Sorento, from MELLING, SBI, ENGINETECH and 3 other brands. MELLING V3255 carries the "Popular" badge.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

19 Motor Mount parts are listed for the 2011 Kia Sorento, from DEA / MARMON RIDE CONTROL, WESTAR, ANCHOR and 2 other brands. ANCHOR 9729 carries the "Popular" badge. 16 parts fit every engine; the other 3 are engine-specific.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2011 Kia Sorento. All of them fit every engine offered in the 2011 Sorento.

Part numbers include ANCHOR 300375 and ANCHOR 300374.