2011 Kia Soul Electrical Connector Parts

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 A/C Refrigerant Pressure Switch Connector parts are listed for the 2011 Kia Soul, from FOUR SEASONS, GPD, STANDARD MOTOR PRODUCTS and 1 other brand. All of them fit every engine offered in the 2011 Soul.

This group includes FOUR SEASONS 37276, GPD 1712679 and STANDARD MOTOR PRODUCTS S2458 and the remaining parts above.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 ABS Wheel Speed Sensor Connector parts for the 2011 Kia Soul come from 3 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN and BECK/ARNLEY. The "Popular" part is HOLSTEIN 2ABS2609. Every part fits both the 1.6L L4 and the 2.0L L4.

Listed part numbers: HOLSTEIN 2ABS2609, STANDARD MOTOR PRODUCTS S2962 and BECK/ARNLEY 0844942, plus the other parts above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2964.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Blower Motor Control Module / Resistor Connector parts are listed for the 2011 Kia Soul, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 2 other brands. STANDARD MOTOR PRODUCTS S1519 carries the "Popular" badge. All of them fit every engine offered in the 2011 Soul.

This group includes STANDARD MOTOR PRODUCTS S1519, WELLS 1P1789 and FOUR SEASONS 37257 and the remaining parts above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2011 Kia Soul, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 Soul.

Part numbers include STANDARD MOTOR PRODUCTS S1785 and WELLS 1P1789.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Camshaft Position Sensor Connector parts for the 2011 Kia Soul come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 3 other brands. The "Popular" part is WELLS 1P1421.

This group includes WELLS 1P1421, ROSTRA 610105 and STANDARD MOTOR PRODUCTS HP3975 and the remaining parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Crankshaft Position Sensor Connector parts for the 2011 Kia Soul come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 2 other brands. The "Popular" part is WELLS 1P1421.

This group includes WELLS 1P1421, ROSTRA 610584 and ROSTRA 610105 and the remaining parts above.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Soul — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fog / Driving Lamp Connector parts for the 2011 Kia Soul come from 5 brands — STANDARD MOTOR PRODUCTS, ACDELCO, ROSTRA and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3835. Every part fits both the 1.6L L4 and the 2.0L L4.

Part numbers include STANDARD MOTOR PRODUCTS HP3835, STANDARD MOTOR PRODUCTS S553 and ACDELCO PT2298, among others listed above.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts for the 2011 Kia Soul come from 3 brands — GB REMANUFACTURING, STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 1.6L L4 and the 2.0L L4.

Listed part numbers: GB REMANUFACTURING 5187, STANDARD MOTOR PRODUCTS S2330 and WELLS 1P4050.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2873.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Soul — STANDARD MOTOR PRODUCTS S3121.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2011 Kia Soul — STANDARD MOTOR PRODUCTS LWH109.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3131.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Knock / Detonation Sensor Connector parts for the 2011 Kia Soul come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: ROSTRA 610085, ROSTRA 610049 and STANDARD MOTOR PRODUCTS HP4325, plus the other parts above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Manifold Pressure (MAP) Sensor Connector parts for the 2011 Kia Soul come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, UNITED MOTOR PRODUCTS and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1461. 4 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S1461, ROSTRA 610351 and UNITED MOTOR PRODUCTS CON222, plus the other parts above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Kia Soul — STANDARD MOTOR PRODUCTS S3077.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2011 Kia Soul come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S3134 and STANDARD MOTOR PRODUCTS S3133.

This table covers the harness connectors at the Power Window Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Radiator Fan Resistor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3162.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 4 Radio Connector parts for the 2011 Kia Soul. All of them fit every engine offered in the 2011 Soul.

Part numbers include METRA 707303, METRA AXUSBHK2 and METRA 7173031, among others listed above.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Speed Sensor Connector parts are listed for the 2011 Kia Soul, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WELLS and 2 other brands. STANDARD MOTOR PRODUCTS HP3975 carries the "Popular" badge. 7 parts fit every engine; the other 1 is engine-specific.

This group includes STANDARD MOTOR PRODUCTS HP3975, WELLS 1P1421 and ROSTRA 610105 and the remaining parts above.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3094.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Throttle Position Sensor (TPS) Connector parts are listed for the 2011 Kia Soul, from SKP, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: SKP SKS1038, STANDARD MOTOR PRODUCTS S1038 and UNITED MOTOR PRODUCTS CON7, plus the other parts above.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Trailer Connector parts are listed for the 2011 Kia Soul, from CURT, TEKONSHA and HELLA. CURT 56222 carries the "Popular" badge. All of them fit every engine offered in the 2011 Soul.

This group includes CURT 56222, CURT 56442 and CURT 56220 and the remaining parts above.

This table covers the Trailer Wire converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2011 Kia Soul — CURT 56023.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Canister Purge Valve / Solenoid Connector parts for the 2011 Kia Soul come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 3 are engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4325, STANDARD MOTOR PRODUCTS S1024 and STANDARD MOTOR PRODUCTS S1414, plus the other parts above.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Vent Valve / Solenoid Connector parts for the 2011 Kia Soul come from 2 brands — ROSTRA and WELLS. Every part fits both the 1.6L L4 and the 2.0L L4.

Part numbers include ROSTRA 610108 and WELLS 1P1362.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Variable Valve Timing (VVT) Solenoid Connector parts for the 2011 Kia Soul come from 3 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS. Every part fits both the 1.6L L4 and the 2.0L L4.

Listed part numbers: STANDARD MOTOR PRODUCTS S1716, WALKER PRODUCTS 2701102 and WELLS 1P1680.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3131.