2011 Kia Soul Engine Parts

This table covers the camshafts that open the valves. Read more

2 Camshaft parts are listed for the 2011 Kia Soul, from AUTO 7 and KIA.

This group includes AUTO 7 6150208 and KIA 242002B020.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2011 Kia Soul — ELRING 725780.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts for the 2011 Kia Soul come from 5 brands — NATIONAL, BCA, SCHAEFFLER and 2 other brands. The "Popular" part is NATIONAL 99139.

This group includes NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472 and the remaining parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Camshaft Seal parts for the 2011 Kia Soul come from 12 brands — NATIONAL, SKF, TIMKEN and 9 other brands. The "Popular" part is NATIONAL 3771.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts are listed for the 2011 Kia Soul, from HYUNDAI and TOPLINE.

This group includes HYUNDAI 235102B010 and TOPLINE CRHY22.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 2011 Kia Soul, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands.

Listed part numbers: ENGINETECH BB1007, ITM ENGINE COMPONENTS 4B1631 and KING ENGINE BEARINGS CR4575SM, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Conversion / Lower Gasket Set parts are listed for the 2011 Kia Soul, from AJUSA, FEL-PRO, APEX and 4 other brands. AJUSA 54244600 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts for the 2011 Kia Soul come from 5 brands — TOPLINE, ITM ENGINE COMPONENTS, ENGINETECH and 2 other brands. The "Popular" part is ITM ENGINE COMPONENTS 5M9386.

Listed part numbers: ITM ENGINE COMPONENTS 5M9386, ENGINETECH BC1040 and KING ENGINE BEARINGS MB5706SI, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 2011 Kia Soul come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

Listed part numbers: BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

38 Crankshaft Seal parts for the 2011 Kia Soul come from 13 brands — VICTOR REINZ, ELRING, FEL-PRO and 10 other brands. The "Popular" part is ELRING 902760. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts are listed for the 2011 Kia Soul, from FEL-PRO, APEX, ENGINETECH and 7 other brands. ENGINETECH HB232 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Cylinder Head Gasket parts are listed for the 2011 Kia Soul, from APEX, FEL-PRO, AJUSA and 6 other brands. APEX AHG268 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts are listed for the 2011 Kia Soul, from FEL-PRO, ELRING, APEX and 6 other brands. APEX AHS2068 carries the "Popular" badge.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 2011 Kia Soul, from ENGINETECH and SBI.

This group includes ENGINETECH CHS1047 and SBI 2302136.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

4 Engine Block Heater parts for the 2011 Kia Soul come from KAT'S HEATERS. 1 part fits every engine; the other 3 are engine-specific.

Listed part numbers: KAT'S HEATERS 11485, KAT'S HEATERS 11812 and KAT'S HEATERS 28812, plus the other parts above.

This table covers the Engine covers. Read more

TECHPRO supplies both parts for the 2011 Kia Soul. All of them fit every engine offered in the 2011 Soul.

Listed part numbers: TECHPRO KI1228125 and TECHPRO KI1228124.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2011 Kia Soul, from ELRING, ENGINETECH, TOPLINE and 3 other brands. ELRING 925630 carries the "Popular" badge.

This group includes ELRING 925630, ITM ENGINE COMPONENTS 0900322 and AJUSA 50313300 and the remaining parts above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2011 Kia Soul — ENGINETECH RCHY20BP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts for the 2011 Kia Soul come from 7 brands — MELLING, TOPLINE, ENGINETECH and 4 other brands. The "Popular" part is MELLING V5566.

This group includes MELLING V5566, ENGINETECH EM1003 and HYUNDAI 222122B000 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts are listed for the 2011 Kia Soul, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH PK914 and TOPLINE EPSMI4.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

12 Harmonic Balancer parts are listed for the 2011 Kia Soul, from HYUNDAI, ATP, PIONEER and 4 other brands. DAYCO PB1553N carries the "Popular" badge.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts are listed for the 2011 Kia Soul, from ELRING, FEL-PRO, APEX and 4 other brands. ELRING 310560 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts for the 2011 Kia Soul come from 7 brands — HYUNDAI, MELLING, QUALCAST and 4 other brands. The "Popular" part is HYUNDAI 2221123600.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

12 Motor Mount parts for the 2011 Kia Soul come from 7 brands — PIONEER, ANCHOR, WESTAR and 4 other brands. The "Popular" part is ANCHOR 9756.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM9778 is listed in this group.

In the Standard Replacement grade, PIONEER, ANCHOR, WESTAR and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is ANCHOR 9756.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A4127.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 2011 Kia Soul come from ANCHOR.

This group includes ANCHOR 300949, ANCHOR 300948 and ANCHOR 300951 and the remaining parts above.