2011 Kia Soul Automatic Transmission Parts

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

9 Filter parts are listed for the 2011 Kia Soul, from VAICO, ATP, VARIOUS MFR and 1 other brand. BECK/ARNLEY 0440363 carries the "Popular" badge. 8 parts fit every engine; the other 1 is engine-specific.

The Basic Kit (Without Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Basic Kit (Without Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V520389BEK is listed in this group.

In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PT99409.

The Standard Replacement section lists 7 options from VAICO, ATP and BECK/ARNLEY — built to original-equipment specification. BECK/ARNLEY 0440363 is listed in this group.

This group includes BECK/ARNLEY 0440363, VAICO V520389BEK and VARIOUS MFR PT99409 and the remaining parts above.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts for the 2011 Kia Soul come from 4 brands — DORMAN, SKP, SPECTRA PREMIUM and 1 other brand. Every part fits both the 1.6L L4 and the 2.0L L4.

This group includes DORMAN 265812, SKP SK265812 and SPECTRA PREMIUM TP0812 and the remaining parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

2 Fluid Pump Repair Sleeve parts for the 2011 Kia Soul come from 2 brands — SCHAEFFLER and SKF. Every part fits both the 1.6L L4 and the 2.0L L4.

Part numbers include SCHAEFFLER SR3502 and SKF 99182.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 16984.

This table covers the Fluid temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Fluid Temperature Sensor parts are listed for the 2011 Kia Soul, from GPD and STANDARD MOTOR PRODUCTS. All of them fit every engine offered in the 2011 Soul.

Listed part numbers: GPD 1814541 and STANDARD MOTOR PRODUCTS TX300.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN 320583.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Output Shaft Seal parts are listed for the 2011 Kia Soul, from SKF, TIMKEN, HYUNDAI and 1 other brand. SKF 16141 carries the "Popular" badge. All of them fit every engine offered in the 2011 Soul.

This group includes SKF 16141, SKF 16143 and HYUNDAI 4311939010 and the remaining parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2011 Kia Soul — WELLS 2N1376.

This table covers the rebuild kits for this assembly. Read more

3 Rebuild Kit parts for the 2011 Kia Soul come from 2 brands — PA CARGO and TRANSTEC. 2 parts fit every engine; the other 1 is engine-specific.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO supplies 1 part: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK4100F.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from PA CARGO and TRANSTEC — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K41900F is listed in this group.

Listed part numbers: PA CARGO DK4100F, PA CARGO K41900F and TRANSTEC 81000619.

This table covers the Shift Improvement kits. Read more

TRANSGO supplies both parts for the 2011 Kia Soul. All of them fit every engine offered in the 2011 Soul.

Part numbers include TRANSGO SKA6MF and TRANSGO SKA4CF.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 2N1276.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2011 Kia Soul — TC REMANUFACTURING CT38.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts for the 2011 Kia Soul come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 1.6L L4 and the 2.0L L4.

This group includes BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts for the 2011 Kia Soul come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

This group includes BCA NS320583, NATIONAL 320583 and SCHAEFFLER SS3759 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

20 Transmission Fluid parts are listed for the 2011 Kia Soul, from VALVOLINE, LUCAS OIL, LIQUI MOLY and 7 other brands. ACDELCO 109243 carries the "Popular" badge. 11 parts fit every engine; the other 9 are engine-specific.

In the ATF +4 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058112.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, LUCAS OIL and 2 other brands supply 11 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the SP-III (SP3) grade, BECK/ARNLEY and IDEMITSU supply 2 parts: grouped under the catalog's "SP-III (SP3)" designation — the notes column spells out what sets them apart. A representative part number is BECK/ARNLEY 2522003.

The SP-IV (SP 4) section lists 1 option from AISIN — grouped under the catalog's "SP-IV (SP 4)" designation — the notes column spells out what sets them apart. AISIN ATFSP4 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 7 Transmission Fluid Additive parts for the 2011 Kia Soul. LUBEGARD 19610 carries the "Popular" badge. All of them fit every engine offered in the 2011 Soul.

This group includes LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689 and the remaining parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2011 Kia Soul come from 5 brands — ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 9763. 4 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: ANCHOR 9763, BECK/ARNLEY 1042163 and DEA / MARMON RIDE CONTROL A71007, plus the other parts above.

This table covers the Transmission service kits. Read more

3 Transmission Service Kit parts for the 2011 Kia Soul come from VAICO.

In the Expert Kit (Basic Kit & Transmission Fluid) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V520389.

The Expert Kit + (Expert Kit and Extra Oil for Rinsing) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. VAICO V520389XXL is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include VAICO V520389 and VAICO V520389XXL, among others listed above.