This page lists 13 steering parts for the 2018 Kia Stinger, across 2 part types, covering both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
The steering system on the 2018 Kia Stinger connects driver to road through the rack, pump, tie rods, and column components. All 13 listed parts are Tie Rod End (10 parts) and Knuckle (3 parts).
The 2018 Kia Stinger was sold with both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged. All 13 parts on this page fit every engine.
The most listed brands for 2018 Kia Stinger steering parts are MEVOTECH (4 parts), SUSPENSIA (2 parts) and BECK/ARNLEY (2 parts), plus 4 more brands. Quality grades include Economy and Daily Driver.
2 parts on this 2018 Kia Stinger page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including MEVOTECH MS90683 (Tie Rod End) and BECK/ARNLEY 1018768 (Tie Rod End). Click any part number to see every vehicle that part fits.
Knuckle
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KIA Fits: all 2018 Stinger engines | 51710J5000 | 🇺🇸 US 🇲🇽 MX | Front LeftRWD | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APWI Fits: all 2018 Stinger engines | 51710J5000 | 🇺🇸 US 🇲🇽 MX | Front LeftRWD | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HYUNDAI Fits: all 2018 Stinger engines | 51710J5000 | 🇺🇸 US 🇲🇽 MX | Front LeftRWD | View on Amazon |
This table covers the steering knuckles that carry the hub, caliper and ball joints.
3 Knuckle parts for the 2018 Kia Stinger come from 3 brands — KIA, APWI and HYUNDAI. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.
In the Daily Driver grade, KIA supplies 1 part: grouped for everyday commuting duty. A representative part number is KIA 51710J5000.
The Economy section lists 1 option from APWI — the catalog's value-priced group. APWI 51710J5000 is listed in this group.
1 further part sits outside the graded sections, with the same engine-level match.
This group includes KIA 51710J5000 and the remaining parts above.
Tie Rod End
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular Fits: all 2018 Stinger engines | MS90683 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supreme | View on Amazon |
| MEVOTECH Fits: all 2018 Stinger engines | MS90682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supreme | View on Amazon |
| SUSPENSIA Fits: all 2018 Stinger engines | X23TE1085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| SUSPENSIA Fits: all 2018 Stinger engines | X23TE1086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Popular Fits: all 2018 Stinger engines | 1018768 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| BECK/ARNLEY Fits: all 2018 Stinger engines | 1018769 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| DORMAN Fits: all 2018 Stinger engines | 544289 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Left Outer | View on Amazon |
| DORMAN Fits: all 2018 Stinger engines | 544290 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front Right Outer | View on Amazon |
| MEVOTECH Fits: all 2018 Stinger engines | GS90682 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
| MEVOTECH Fits: all 2018 Stinger engines | GS90683 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Original Grade | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
10 Tie Rod End parts are listed for the 2018 Kia Stinger, from MEVOTECH, SUSPENSIA, BECK/ARNLEY and 1 other brand. MEVOTECH MS90683 carries the "Popular" badge. All of them fit every engine offered in the 2018 Stinger.
The Daily Driver section: 4 options from MEVOTECH and SUSPENSIA. MEVOTECH MS90683 is listed in this group.
Economy: 6 parts, from BECK/ARNLEY, DORMAN and MEVOTECH. A representative part number is BECK/ARNLEY 1018768.
Buying Steering Parts for a 2018 Kia Stinger
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- You do not need to pick an engine: every steering part on this page fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod End and Knuckle .
Frequently Asked Questions
How many steering parts fit the 2018 Kia Stinger?
Our catalog currently lists 13 steering parts for the 2018 Kia Stinger across 2 subcategories and 7 brands, covering both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged. Each part is matched to the engine(s) it fits.
Do steering parts differ between 2018 Kia Stinger engines?
No. On this page every steering part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of steering problems on a 2018 Kia Stinger?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Kia Stinger was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Kia Stinger?
Every part on this page already fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Kia Stinger
Steering Parts for Other Kia Stinger Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.