2018 Kia Stinger Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2018 Kia Stinger — HYUNDAI 241002GTB0.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2018 Kia Stinger, from TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BB1004, TOPLINE RBHY11L and TOPLINE RBHY14L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Kia Stinger.

Listed part numbers: AJUSA 54310000 and AJUSA 54350800.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2018 Kia Stinger come from 2 brands — TOPLINE and ENGINETECH.

This group includes ENGINETECH BC1001, TOPLINE TWHY11 and TOPLINE MBHY11L and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2018 Kia Stinger come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

This group includes BCA NS99166, BCA NS99177 and NATIONAL 99166 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

28 Crankshaft Seal parts for the 2018 Kia Stinger come from 10 brands — VICTOR REINZ, FEL-PRO, APEX and 7 other brands. The "Popular" part is BCA NS224200. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts are listed for the 2018 Kia Stinger, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 4 other brands. FEL-PRO ES724651 carries the "Popular" badge.

Part numbers include FEL-PRO ES724651, MAHLE / CLEVITE GS33547 and AJUSA 81045900, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts are listed for the 2018 Kia Stinger, from AJUSA, APEX, ELRING and 1 other brand.

Part numbers include AJUSA 10252100, AJUSA 10284100 and AJUSA 10284200, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts are listed for the 2018 Kia Stinger, from AJUSA, ELRING and TOPLINE.

This group includes AJUSA 52582200, AJUSA 52689400 and ELRING B24510 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2018 Kia Stinger come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11479 and KAT'S HEATERS 28500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2018 Kia Stinger, from AJUSA and ELRING.

Listed part numbers: AJUSA 50530500, AJUSA 50609700 and ELRING B24500.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V5836.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2018 Kia Stinger — WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 2018 Kia Stinger, from HYUNDAI, ACKOJA, ATP and 2 other brands. HYUNDAI 231242GGA0 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include HYUNDAI 231242GGA0, ACKOJA A520620 and ATP 102422, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2018 Kia Stinger, from AJUSA, ELRING and MAHLE / CLEVITE.

Part numbers include AJUSA 13293800, AJUSA 02025900 and AJUSA 13362100, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2018 Kia Stinger come from 4 brands — MELLING, SBI, TOPLINE and 1 other brand.

Part numbers include MELLING V3255, MELLING V3286 and QUALCAST 1013190, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

101 Oil parts for the 2018 Kia Stinger come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. They are grouped as Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 67 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2018 Kia Stinger come from 3 brands — AUTOTECNICA, DORMAN and GPD. 1 part fits every engine; the other 2 are engine-specific.

This group includes AUTOTECNICA HY1421719, DORMAN 918907 and GPD 2611480.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2018 Kia Stinger come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2018 Kia Stinger, from DORMAN, AJUSA, ELRING and 2 other brands. DORMAN 095147 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2018 Kia Stinger come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: CALORSTAT OC2331, GATES 31083 and MOTORAD MO151, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Kia Stinger — ELRING 453020.