2019 Mitsubishi L200 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2019 Mitsubishi L200 has 62 engine parts with verified fitment on this page — 23 part types and 11 brands, covering both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.

The engine on the 2019 Mitsubishi L200 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (9 parts), Cylinder Head Gasket (7 parts) and Intake Manifold Gasket (5 parts). The other 20 part types cover the remaining 41 parts.

Balance Shaft Belt

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.4L L4 B168
🇲🇽 MX
Interference Engine
View on
Amazon

This table covers the Balance Shaft belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.

Balance Shaft Belt Tensioner

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.4L L4 96211
🇲🇽 MX
Engine Balance Shaft Belt Tensioner
View on
Amazon

This table covers the Balance Shaft Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2019 L200 engines 15013300
🇲🇽 MX
ClockwiseEngine # 4G64
Fitment notes — AJUSA 15013300
ClockwiseEngine # 4G64
35 x 50 x 8Clockwise
View on
Amazon
ELRING Fits: 2.4L L4 293946
🇲🇽 MX
Material: ACM (Polyacrylate)Radial Shaft Seal Design: A
Fitment notes — ELRING 293946
Material: ACM (Polyacrylate)Radial Shaft Seal Design: A
4WD
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 54251400
🇲🇽 MX
Engine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 54251600
🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Popular Fits: all 2019 L200 engines 15020600
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15020600
FrontClockwiseEngine # 4G64
FrontClockwise
View on
Amazon
AJUSA Popular Fits: 2.4L L4 15052700
🇲🇽 MX
RearCounter Clockwise
Fitment notes — AJUSA 15052700
RearCounter ClockwiseEngine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 15096900
🇲🇽 MX
Rear91 X 107 X 8
Fitment notes — AJUSA 15096900
Rear91 X 107 X 8Counter Clockwise
View on
Amazon
ELRING Fits: 2.4L L4 247280
🇲🇽 MX
Height [MM]: 7Inner Diameter [mm]: 44
Fitment notes — ELRING 247280
Height [MM]: 7Inner Diameter [mm]: 44Material: FPM (Fluoride Rubber)Swirl Type: Right-hand Twist
4WD
View on
Amazon
ELRING Fits: 2.4L L4 034560
🇲🇽 MX
Inner Diameter [mm]: 85Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 034560
Inner Diameter [mm]: 85Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 103Radial Shaft Seal Design: ASSwirl Type: Left-hand Twist
4WD
View on
Amazon
ELRING Fits: 2.4L L4 524890
🇲🇽 MX
Height [MM]: 7,5Swirl Type: Right-hand Twist
View on
Amazon
ELRING Fits: 2.4L L4 524920
🇲🇽 MX
Outer Diameter [mm]: 111Swirl Type: Left-hand Twist
View on
Amazon
VICTOR REINZ Fits: all 2019 L200 engines 815327910
🇲🇽 MX
FrontReplaces OE Part Number(s) MD343563
Fitment notes — VICTOR REINZ 815327910
FrontReplaces OE Part Number(s) MD343563
Replaces OE Part Number(s) MD343563
View on
Amazon
VICTOR REINZ Fits: 2.4L L4 811038700
🇲🇽 MX
FPM Rubber Material
Fitment notes — VICTOR REINZ 811038700
FPM Rubber Material
RearReplaces OE Part Number(s) MD359158
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 81046000
🇲🇽 MX
View on
Amazon
ELRING Fits: 2.4L L4 003930
🇲🇽 MX
SetBolt Head-/Nut Design: Male Star
Fitment notes — ELRING 003930
SetBolt Head-/Nut Design: Male StarThread Size: M11X1,25x97
4WD
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 10216000
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10216000
Multi Layered Steel
87.5 Bore DiameterEngine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 10193700
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10193700
Multi Layered Steel
92.5 Bore Diameterwith 1A Grooves(0.95) Thickness
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 10193720
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10193720
Multi Layered Steel
92.5 Bore Diameterwith 3C Grooves(1.05) Thickness
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 10193710
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10193710
Multi Layered Steel
92.5 Bore Diameterwith 2B Grooves(1.00) Thickness
View on
Amazon
ELRING Fits: 2.4L L4 468870
🇲🇽 MX
Notches/Holes Number: 2Thickness: 1.35 MM
View on
Amazon
ELRING Fits: 2.4L L4 468920
🇲🇽 MX
Notches/Holes Number: 1
View on
Amazon
ELRING Fits: 2.4L L4 468930
🇲🇽 MX
Notches/Holes Number: 3Thickness: 1.4 MM
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 52486800
🇲🇽 MX
Engine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 53070300
🇲🇽 MX
Does Not Include Cylinder Head Gasket
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 50438700
🇲🇽 MX
Engine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 51075300
🇲🇽 MX
Does Not Include Cylinder Head Gasket
View on
Amazon
ELRING Fits: 2.4L L4 468840
🇲🇽 MX
with Crankshaft Seal
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 13127600
🇲🇽 MX
Engine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 13233400
🇲🇽 MX
Upper
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 13278300
🇲🇽 MX
Lower
View on
Amazon
ELRING Fits: 2.4L L4 474140
🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 2.4L L4 715316300
🇲🇽 MX
Replaces OE Part Number(s) MD193224
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intermediate Shaft Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 2.4L L4 247260
🇲🇽 MX
4WD
View on
Amazon

This table covers the seals at the Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: all 2019 L200 engines 090053
🇲🇽 MX
MetalPilot Point
Fitment notes — DORMAN 090053
MetalPilot PointM14-1.50Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
DORMAN Fits: all 2019 L200 engines 090075
🇲🇽 MX
StandardM14-1.50
Fitment notes — DORMAN 090075
StandardM14-1.50Head Size 17MM
.4" LengthM14 x 1.50 Thread
View on
Amazon
ELRING Fits: 2.4L L4 523500
🇲🇽 MX
with Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 523500
with Seal RingBolt Head-/Nut Design: Male HexThread Size: M14X1,5x15
4WD
View on
Amazon
ELRING Fits: 2.4L L4 523480
🇲🇽 MX
without Seal RingThread Size: M14X1,5x15
Fitment notes — ELRING 523480
without Seal RingThread Size: M14X1,5x15
4WD
View on
Amazon
SKP Fits: all 2019 L200 engines SK090053CD
🇲🇽 MX
Metal
Fitment notes — SKP SK090053CD
Metal
16 mm HeadThread Pitch: 1.5 mm
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2019 L200 engines 18001100
🇲🇽 MX
Engine # 4G64
View on
Amazon
DORMAN Fits: all 2019 L200 engines 095141
🇲🇽 MX
CrushSize
Fitment notes — DORMAN 095141
CrushSizeM14, 1/2"SOInside Dia: 0.544"/13.82mmOutside Dia.: 0.750"/19.05mmThickness: 0.080/2.03mm
View on
Amazon
ELRING Fits: 2.4L L4 394030
🇲🇽 MX
4WD
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: all 2019 L200 engines MO88
🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: 2.4L L4 PG4612
🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: 2.5L L4 DIESEL Turbocharged PG4750
🇲🇽 MX
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: 2.4L L4 M1110A
🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACKOJA Fits: 2.5L L4 DIESEL Turbocharged A370501
🇲🇽 MX
4WDTo 03/10/2018
Fitment notes — ACKOJA A370501
4WDTo 03/10/2018with OE No. 1230A186
View on
Amazon
VARIOUS MFR Fits: 2.4L L4 PG4612EX
🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 14040100
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 2.4L L4 801550
🇲🇽 MX
Material: FPM (Fluoride Rubber)
Fitment notes — ELRING 801550
Material: FPM (Fluoride Rubber)
4WD
View on
Amazon

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Belt

Brand Part Number Markets Notes Buy
BANDO Fits: 2.4L L4 TB230
🇲🇽 MX
View on
Amazon

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.

Timing Idler

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.4L L4 95274
🇲🇽 MX
View on
Amazon

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 DIESEL Turbocharged JTC12113
🇲🇽 MX
Mounting Gasket Set
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.5L L4 DIESEL Turbocharged OP10228
🇲🇽 MX
Supply tube
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 56013600
🇲🇽 MX
Engine # 4G64
View on
Amazon
AJUSA Fits: 2.5L L4 DIESEL Turbocharged 56065400
🇲🇽 MX
View on
Amazon
ELRING Fits: 2.4L L4 468850
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2019 L200 engines 12025000
🇲🇽 MX
4.8 x 10.8 x 10.6Engine # 4G64
Fitment notes — AJUSA 12025000
4.8 x 10.8 x 10.6Engine # 4G64
4.8 x 10.8 x 10.6
View on
Amazon
AJUSA Fits: all 2019 L200 engines 57046300
🇲🇽 MX
Engine # 4G64
View on
Amazon
ELRING Fits: 2.4L L4 019140
🇲🇽 MX
Height [MM]: 10,6Inner Diameter [MM]: 10,8
Fitment notes — ELRING 019140
Height [MM]: 10,6Inner Diameter [MM]: 10,8Inside Diameter: 10.8 mmMaterial: FPM (fluoride rubber)Thickness: 10.6 mm
View on
Amazon
ELRING Fits: 2.4L L4 B23400
🇲🇽 MX
Set
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2019 Mitsubishi L200

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Cylinder Head Gasket .

Frequently Asked Questions

How many engine parts fit the 2019 Mitsubishi L200?

Our catalog currently lists 62 engine parts for the 2019 Mitsubishi L200 across 23 subcategories and 11 brands, covering both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2019 Mitsubishi L200 engines?

Some do. 11 parts fit every engine; the other 51 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2019 Mitsubishi L200?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Mitsubishi L200 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2019 Mitsubishi L200?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2019 Mitsubishi L200

Engine Parts for Other Mitsubishi L200 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.