2021 Mitsubishi L200 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2021 Mitsubishi L200 has 26 engine parts with verified fitment on this page — 15 part types and 7 brands, covering both the 2.4L L4 and the 2.4L L4 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.

The engine on the 2021 Mitsubishi L200 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (4 parts), Cylinder Head Gasket (3 parts) and Oil Drain Plug (3 parts). The other 12 part types cover the remaining 16 parts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 54333500
🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 15079300
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 15098300
🇲🇽 MX
Rear95 x 111 x 8
Fitment notes — AJUSA 15098300
Rear95 x 111 x 8Counter Clockwise
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 81062800
🇲🇽 MX
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 10227500
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10227500
Multi Layered Steel
87.5 Bore DiameterPiston Stand Out from 0.522 To 0.564with 1+1 Grooves(1.30) Thickness
View on
Amazon
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 10227510
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10227510
Multi Layered Steel
87.5 Bore DiameterPiston Stand Out from 0.564 To 0.618with 1+2 Grooves(1.35) Thickness
View on
Amazon
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 10227520
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10227520
Multi Layered Steel
87.5 Bore DiameterPiston Stand Out from 0.618 To 0.671with 1+3 Grooves(1.40) Thickness
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 53109100
🇲🇽 MX
Does Not Include Cylinder Head Gasket
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 51115200
🇲🇽 MX
Does Not Include Cylinder Head Gasket
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 13241800
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: all 2021 L200 engines 090075
🇲🇽 MX
StandardM14-1.50
Fitment notes — DORMAN 090075
StandardM14-1.50Head Size 17MM
.4" LengthM14 x 1.50 Thread
View on
Amazon
DORMAN Fits: all 2021 L200 engines 090053
🇲🇽 MX
MetalPilot Point
Fitment notes — DORMAN 090053
MetalPilot PointM14-1.50Head Size 16MM
M14 x 1.50 Thread
View on
Amazon
SKP Fits: all 2021 L200 engines SK090053CD
🇲🇽 MX
Metal
Fitment notes — SKP SK090053CD
Metal
16 mm HeadThread Pitch: 1.5 mm
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 18001100
🇲🇽 MX
View on
Amazon
DORMAN Fits: all 2021 L200 engines 095141
🇲🇽 MX
CrushSize
Fitment notes — DORMAN 095141
CrushSizeM14, 1/2"SOInside Dia: 0.544"/13.82mmOutside Dia.: 0.750"/19.05mmThickness: 0.080/2.03mm
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
MARELLI Fits: 2.4L L4 DIESEL Turbocharged OC196
🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: all 2021 L200 engines PG4612
🇲🇽 MX
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: all 2021 L200 engines M1110A
🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: all 2021 L200 engines PG4612EX
🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Timing Belt

Brand Part Number Markets Notes Buy
BANDO Fits: all 2021 L200 engines TB230
🇲🇽 MX
View on
Amazon

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged JTC12112
🇲🇽 MX
Mounting Gasket Set
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged OP11178
🇲🇽 MX
Supply tube
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 11145300
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 12025000
🇲🇽 MX
Intake4.8 x 10.8 x 10.6
View on
Amazon
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 12030900
🇲🇽 MX
Exhaust4.9 x 10.8 x 11.4
View on
Amazon
AJUSA Fits: 2.4L L4 DIESEL Turbocharged 57064700
🇲🇽 MX
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 2021 Mitsubishi L200

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Cylinder Head Gasket .

Frequently Asked Questions

How many engine parts fit the 2021 Mitsubishi L200?

Our catalog currently lists 26 engine parts for the 2021 Mitsubishi L200 across 15 subcategories and 7 brands, covering both the 2.4L L4 and the 2.4L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Mitsubishi L200 engines?

Some do. 8 parts fit every engine; the other 18 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Mitsubishi L200?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Mitsubishi L200 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Mitsubishi L200?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Mitsubishi L200

Engine Parts for Other Mitsubishi L200 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.