2011 Nissan Versa Electrical Connector Parts

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 A/C Refrigerant Pressure Switch Connector parts for the 2011 Nissan Versa come from 4 brands — FOUR SEASONS, GPD, STANDARD MOTOR PRODUCTS and 1 other brand. Every part fits both the 1.6L L4 and the 1.8L L4.

Part numbers include FOUR SEASONS 37276, GPD 1712679 and STANDARD MOTOR PRODUCTS S2458, among others listed above.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 ABS Wheel Speed Sensor Connector parts are listed for the 2011 Nissan Versa, from HOLSTEIN, STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 Versa.

Listed part numbers: HOLSTEIN 2HAR0036, STANDARD MOTOR PRODUCTS S1686 and WELLS 1P2265.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Accelerator Pedal Position Sensor Connector parts are listed for the 2011 Nissan Versa, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 Versa.

This group includes STANDARD MOTOR PRODUCTS S2822 and WELLS 1P2685.

This table covers the harness connectors at the Battery Cable Junction Block. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: DORMAN 956140.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — STANDARD MOTOR PRODUCTS S3210.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: HOLSTEIN 2HAR0046.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Brake Light Switch Connector parts for the 2011 Nissan Versa come from 4 brands — STANDARD MOTOR PRODUCTS, ROSTRA, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS S1519. Every part fits both the 1.6L L4 and the 1.8L L4.

Listed part numbers: STANDARD MOTOR PRODUCTS S1519, ROSTRA 610128 and STANDARD MOTOR PRODUCTS HP4145, plus the other parts above.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Camshaft Position Sensor Connector parts are listed for the 2011 Nissan Versa, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 2 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S2844, UNITED MOTOR PRODUCTS CON211 and WELLS 1P3595.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts are listed for the 2011 Nissan Versa, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2011 Versa.

This group includes STANDARD MOTOR PRODUCTS S2844 and UNITED MOTOR PRODUCTS CON211.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2011 Nissan Versa. All of them fit every engine offered in the 2011 Versa.

Part numbers include STANDARD MOTOR PRODUCTS S2994 and STANDARD MOTOR PRODUCTS S3305.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts are listed for the 2011 Nissan Versa, from GB REMANUFACTURING, STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 Versa.

This group includes GB REMANUFACTURING 5187, STANDARD MOTOR PRODUCTS S2330 and WELLS 1P4050.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — STANDARD MOTOR PRODUCTS S2993.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Tank Pressure Sensor Connector parts for the 2011 Nissan Versa come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S2327 and WELLS 1P4056.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS LWH109.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts are listed for the 2011 Nissan Versa, from DORMAN, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand. All of them fit every engine offered in the 2011 Versa.

Listed part numbers: DORMAN 645787, STANDARD MOTOR PRODUCTS S2327 and WALKER PRODUCTS 2701085, plus the other parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Knock / Detonation Sensor Connector parts are listed for the 2011 Nissan Versa, from WELLS, ROSTRA and WALKER PRODUCTS. WELLS 1P1347 carries the "Popular" badge. All of them fit every engine offered in the 2011 Versa.

Part numbers include WELLS 1P1347, ROSTRA 610085 and ROSTRA 610049, among others listed above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — STANDARD MOTOR PRODUCTS S2327.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2822.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3123.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — STANDARD MOTOR PRODUCTS S3118.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radio Connector parts for the 2011 Nissan Versa come from METRA. The "Popular" part is METRA 707552. Every part fits both the 1.6L L4 and the 1.8L L4.

Part numbers include METRA 707552, METRA AXBTHNIS and METRA AXBUCHNS, among others listed above.

This table covers the Repair harnesses. Read more

One part is listed for the 2011 Nissan Versa — ROSTRA 3500171.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P4271.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Temperature Sender / Sensor Connector parts are listed for the 2011 Nissan Versa, from STANDARD MOTOR PRODUCTS, ULTRA-POWER and WALKER PRODUCTS. All of them fit every engine offered in the 2011 Versa.

Listed part numbers: STANDARD MOTOR PRODUCTS S2907 and ULTRA-POWER 2701096, plus the other parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — STANDARD MOTOR PRODUCTS S2817.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Connector parts for the 2011 Nissan Versa come from 3 brands — CURT, HELLA and TEKONSHA. 2 parts fit every engine; the other 1 is engine-specific.

This group includes CURT 56021, HELLA 001909001 and TEKONSHA 118545.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2011 Nissan Versa, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 Versa.

This group includes STANDARD MOTOR PRODUCTS S2888 and WELLS 1P3372.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Vent Valve / Solenoid Connector parts are listed for the 2011 Nissan Versa, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 Versa.

Listed part numbers: STANDARD MOTOR PRODUCTS S2888 and WELLS 1P3373.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Versa — STANDARD MOTOR PRODUCTS S2898.