2013 Nissan Tiida Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: PREFERRED COMPONENTS INC C763.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2013 Nissan Tiida — PREFERRED COMPONENTS INC T66221.

This table covers the Balance Shaft sprockets. Read more

This group shows a single part: MELLING S945.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2013 Nissan Tiida — ELRING 073890.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR4638SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2013 Nissan Tiida come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 54247800, AJUSA 54157700 and ELRING 779240, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts are listed for the 2013 Nissan Tiida, from KING ENGINE BEARINGS and MAHLE / CLEVITE.

Listed part numbers: KING ENGINE BEARINGS MB5781SI and MAHLE / CLEVITE MS2301A.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts are listed for the 2013 Nissan Tiida, from ELRING, AJUSA and VICTOR REINZ. ELRING 023530 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.

Part numbers include ELRING 023530, AJUSA 15045100 and AJUSA 15093000, among others listed above.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2013 Nissan Tiida come from 2 brands — ELRING and AJUSA.

This group includes AJUSA 81042900, ELRING 373281 and ELRING 890320 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 2013 Nissan Tiida come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 774940.

Listed part numbers: ELRING 774940, ELRING 302850 and AJUSA 10214300, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 2013 Nissan Tiida come from 2 brands — ELRING and AJUSA.

Part numbers include AJUSA 52479600, AJUSA 52263800 and ELRING 794650, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2013 Nissan Tiida come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 50433400, AJUSA 50283200 and ELRING 994570 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

QUALCAST supplies both parts for the 2013 Nissan Tiida.

Part numbers include QUALCAST 1013234 and QUALCAST 103087.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 2013 Nissan Tiida come from 2 brands — ATP and DORMAN.

Part numbers include ATP 102494, ATP 102405 and DORMAN 594374.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2013 Nissan Tiida come from 4 brands — ELRING, AJUSA, DORMAN and 1 other brand. The "Popular" part is ELRING 478420.

Listed part numbers: ELRING 478420, AJUSA 13259000 and DORMAN 953301, plus the other parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Nissan Tiida — ELRING 693910.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

QUALCAST supplies both parts for the 2013 Nissan Tiida.

Part numbers include QUALCAST 1013233 and QUALCAST 103086.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 2013 Nissan Tiida, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 9828, ANCHOR 9524 and DEA / MARMON RIDE CONTROL A7368, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

VALVOLINE supplies both parts for the 2013 Nissan Tiida. All of them fit every engine offered in the 2013 Tiida.

This group includes VALVOLINE 822344 and VALVOLINE 881160.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2013 Nissan Tiida come from HAYDEN. Every part fits both the 1.6L L4 and the 1.8L L4.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2013 Nissan Tiida, from ELRING, DORMAN and AGS. DORMAN 090038 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

This group includes DORMAN 090038, DORMAN 090049 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2013 Nissan Tiida come from 3 brands — DORMAN, ELRING and AJUSA. The "Popular" part is DORMAN 097134. 4 parts fit every engine; the other 1 is engine-specific.

Part numbers include DORMAN 097134, AJUSA 01140600 and DORMAN 997134CD, among others listed above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2013 Nissan Tiida, from GATES and MOTORAD. All of them fit every engine offered in the 2013 Tiida.

Listed part numbers: GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts are listed for the 2013 Nissan Tiida, from VARIOUS MFR, WIX, CHAMP / LUBER-FINER and 6 other brands. CHAMP / LUBER-FINER PH2876 carries the "Popular" badge. 5 parts fit every engine; the other 7 are engine-specific.

In the Economy grade, VARIOUS MFR, CHAMP / LUBER-FINER, FVP and 1 other brand supply 5 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH2876.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section lists 5 options from WIX, HASTINGS / BALDWIN, MANN and 2 other brands — built to original-equipment specification. WIX 51358 is listed in this group.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2013 Nissan Tiida — ELRING 365960.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts for the 2013 Nissan Tiida come from 5 brands — DORMAN, SPECTRA PREMIUM, SKP and 2 other brands. The "Popular" part is SKP SK264507.

Listed part numbers: SKP SK264507, AUTOTECNICA NI1416320 and DORMAN 264061, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Nissan Tiida — ELRING 380960.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2013 Nissan Tiida — ASTEMO / HITACHI OUP0012.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts for the 2013 Nissan Tiida come from 2 brands — CLOYES and FVP.

Listed part numbers: CLOYES C735F and CLOYES C725F, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts are listed for the 2013 Nissan Tiida, from CLOYES and FVP.

Listed part numbers: CLOYES 95681, plus the other parts above.

This table covers the Oil Pump sprockets. Read more

4 Oil Pump Sprocket parts for the 2013 Nissan Tiida come from 2 brands — CLOYES and FVP.

This group includes CLOYES S991 and CLOYES S945 and the remaining parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts for the 2013 Nissan Tiida come from 2 brands — HASTINGS MANUFACTURING and MAHLE / CLEVITE.

In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 42225CP.

Standard Replacement: 2 parts, from HASTINGS MANUFACTURING. A representative part number is HASTINGS MANUFACTURING 2C5223S.

Listed part numbers: MAHLE / CLEVITE 42225CP, HASTINGS MANUFACTURING 2C5223S and HASTINGS MANUFACTURING 2C5223.

This table covers the Thrust washers. Read more

2 Thrust Washer parts are listed for the 2013 Nissan Tiida, from KING ENGINE BEARINGS and MAHLE / CLEVITE.

This group includes KING ENGINE BEARINGS TW1053AM and MAHLE / CLEVITE TW697S.

This table covers the Timing Cam sprockets. Read more

5 Timing Cam Sprocket parts are listed for the 2013 Nissan Tiida, from CLOYES, FVP and PREFERRED COMPONENTS INC.

Part numbers include CLOYES S984T and CLOYES S946T, among others listed above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts for the 2013 Nissan Tiida come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC.

Listed part numbers: CLOYES C734F and CLOYES C723F, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts are listed for the 2013 Nissan Tiida, from CLOYES and INA.

Listed part numbers: CLOYES 94219SA, CLOYES 94219SX and CLOYES 90723SX, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts for the 2013 Nissan Tiida come from 3 brands — CLOYES, FVP and PREFERRED COMPONENTS INC. The "Popular" part is CLOYES 95582.

Part numbers include CLOYES 95582, CLOYES 95682 and CLOYES 95683, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts are listed for the 2013 Nissan Tiida, from CLOYES, FVP and PREFERRED COMPONENTS INC. CLOYES 95585 carries the "Popular" badge.

Listed part numbers: CLOYES 95585, CLOYES 95680 and CLOYES 95584, plus the other parts above.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts are listed for the 2013 Nissan Tiida, from CLOYES, FVP and PREFERRED COMPONENTS INC.

Part numbers include CLOYES S989 and CLOYES S943, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Torque Strut Mount parts for the 2013 Nissan Tiida come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR. The "Popular" part is ANCHOR 9422. 3 parts fit every engine; the other 4 are engine-specific.

Listed part numbers: ANCHOR 9422, DEA / MARMON RIDE CONTROL A4320 and ANCHOR 9228, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 770070.

This table covers the fasteners that mount the turbocharger. Read more

2 Turbocharger Mounting Hardware parts for the 2013 Nissan Tiida come from ELRING.

Listed part numbers: ELRING 584560 and ELRING 794540.

This table covers the Valve covers. Read more

2 Valve Cover parts for the 2013 Nissan Tiida come from 2 brands — AUTOTECNICA and DORMAN.

This group includes AUTOTECNICA NI1422749 and DORMAN 264744.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 2013 Nissan Tiida, from ELRING, AJUSA and VICTOR REINZ. ELRING 311650 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.

This group includes ELRING 311650, AJUSA 11144500 and AJUSA 11113200 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

QUALCAST supplies both parts for the 2013 Nissan Tiida.

This group includes QUALCAST 303245 and QUALCAST 303244.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: QUALCAST 345012.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Valve Stem Seal parts are listed for the 2013 Nissan Tiida, from ELRING, AJUSA and QUALCAST. ELRING 403730 carries the "Popular" badge. 2 parts fit every engine; the other 7 are engine-specific.

Listed part numbers: ELRING 403730, ELRING 904900 and AJUSA 12028900, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2013 Nissan Tiida, from SKP, DORMAN, GATES and 4 other brands. SKP SK918116 carries the "Popular" badge. 3 parts fit every engine; the other 8 are engine-specific.

Economy: 8 parts, from SKP, DORMAN, GATES and 2 other brands. A representative part number is SKP SK918116.

The Standard Replacement section: 3 options from STANDARD MOTOR PRODUCTS and NTK. NTK VV0035 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

4 Variable Valve Timing (VVT) Sprocket parts are listed for the 2013 Nissan Tiida, from GATES, FVP and WELLS.

Listed part numbers: FVP VC104, GATES VCP817 and GATES VCP951, plus the other parts above.