2014 Nissan Tiida Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2014 Nissan Tiida — KING ENGINE BEARINGS CR4632SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2014 Nissan Tiida, from AJUSA and ELRING.

This group includes AJUSA 54247800 and ELRING 522360.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB5767SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2014 Nissan Tiida come from 3 brands — AJUSA, ELRING and VICTOR REINZ. The "Popular" part is VICTOR REINZ 814087400.

Listed part numbers: VICTOR REINZ 814087400, AJUSA 15104400 and AJUSA 15104500, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2014 Nissan Tiida — ELRING 890320.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2014 Nissan Tiida, from ELRING and AJUSA.

Part numbers include AJUSA 10214300, ELRING 774940 and ELRING 302850.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2014 Nissan Tiida, from AJUSA and ELRING.

Part numbers include AJUSA 52479600 and ELRING 794650.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2014 Nissan Tiida, from ELRING and AJUSA.

Listed part numbers: AJUSA 50433400, ELRING 994570 and ELRING 994560.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2014 Nissan Tiida — ATP 102494.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2014 Nissan Tiida, from ELRING and AJUSA.

Part numbers include AJUSA 13259000, ELRING 478420 and ELRING 307020.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2014 Nissan Tiida come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Listed part numbers: ANCHOR 9828 and DEA / MARMON RIDE CONTROL A7368.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300938.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

2 Oil parts for the 2014 Nissan Tiida come from VALVOLINE.

Part numbers include VALVOLINE 822344 and VALVOLINE 881160.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2014 Nissan Tiida.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2014 Nissan Tiida come from 3 brands — DORMAN, AGS and ELRING.

This group includes AGS ODP00011, DORMAN 090038 and DORMAN 090049 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2014 Nissan Tiida, from DORMAN, AJUSA and ELRING.

This group includes AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2014 Nissan Tiida come from 2 brands — GATES and MOTORAD.

Part numbers include GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

5 Oil Filter parts for the 2014 Nissan Tiida come from 3 brands — VARIOUS MFR, CHAMP / LUBER-FINER and MOBIL. The "Popular" part is MOBIL M1108A.

The Economy section lists 3 options from VARIOUS MFR and CHAMP / LUBER-FINER — the catalog's value-priced group. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

In the Standard Replacement grade, VARIOUS MFR supplies 1 part: built to original-equipment specification. A representative part number is VARIOUS MFR PG4612EX.

Part numbers include MOBIL M1108A, CHAMP / LUBER-FINER PH2876 and VARIOUS MFR PG4612, among others listed above.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts are listed for the 2014 Nissan Tiida, from DORMAN and SPECTRA PREMIUM.

This group includes DORMAN 264061 and SPECTRA PREMIUM NSP35A.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts are listed for the 2014 Nissan Tiida, from CLOYES and FVP.

Listed part numbers: CLOYES C735F, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts for the 2014 Nissan Tiida come from 2 brands — CLOYES and FVP.

Part numbers include CLOYES 95681, among others listed above.

This table covers the Oil Pump sprockets. Read more

2 Oil Pump Sprocket parts are listed for the 2014 Nissan Tiida, from CLOYES and FVP.

Part numbers include CLOYES S991, among others listed above.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2014 Nissan Tiida.

Listed part numbers: HASTINGS MANUFACTURING 2C4439 and HASTINGS MANUFACTURING 2C4439S.

This table covers the Timing Cam sprockets. Read more

2 Timing Cam Sprocket parts for the 2014 Nissan Tiida come from 2 brands — CLOYES and FVP.

Listed part numbers: CLOYES S984T, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2014 Nissan Tiida, from CLOYES and FVP.

Listed part numbers: CLOYES C734F, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2014 Nissan Tiida come from CLOYES.

Listed part numbers: CLOYES 94219SA and CLOYES 94219SX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts are listed for the 2014 Nissan Tiida, from CLOYES and FVP.

Listed part numbers: CLOYES 95682 and CLOYES 95683, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2014 Nissan Tiida come from 2 brands — CLOYES and FVP.

Listed part numbers: CLOYES 95680, plus the other parts above.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2014 Nissan Tiida come from 2 brands — CLOYES and FVP.

Part numbers include CLOYES S989, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Torque Strut Mount parts are listed for the 2014 Nissan Tiida, from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR. ANCHOR 9228 carries the "Popular" badge.

Part numbers include ANCHOR 9228, ANCHOR 9422 and DEA / MARMON RIDE CONTROL A4318, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 2014 Nissan Tiida come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

Part numbers include AJUSA 11144500, ELRING 307010 and VICTOR REINZ 714061200.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2014 Nissan Tiida come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 12028900, AJUSA 57052600 and ELRING 904900.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

10 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2014 Nissan Tiida come from 7 brands — SKP, DORMAN, GATES and 4 other brands. The "Popular" part is SKP SK918116.

The Economy section: 8 options from SKP, DORMAN, GATES and 2 other brands. SKP SK918116 is listed in this group.

Standard Replacement: 2 parts, from NTK and STANDARD MOTOR PRODUCTS. A representative part number is NTK VV0035.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: WELLS 3T1100.