2019 Nissan Frontier Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

BECK/ARNLEY supplies the 3 Axle Shaft Bearing parts for the 2019 Nissan Frontier.

In the Economy grade, BECK/ARNLEY supplies 1 part: the catalog's value-priced group. A representative part number is BECK/ARNLEY 0514270.

The Standard Replacement section lists 1 option from BECK/ARNLEY — built to original-equipment specification. BECK/ARNLEY 0514113 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Part numbers include BECK/ARNLEY 0514270 and BECK/ARNLEY 0514113, among others listed above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Axle Shaft Seal parts for the 2019 Nissan Frontier come from 3 brands — TIMKEN, BECK/ARNLEY and DANA. The "Popular" part is TIMKEN 710479. 3 parts fit every engine; the other 5 are engine-specific.

Listed part numbers: TIMKEN 710479, TIMKEN 2003N and BECK/ARNLEY 0523727, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

4 CV Axle parts for the 2019 Nissan Frontier come from 3 brands — TRAKMOTIVE, GSP and TOP NOTCH. 2 parts fit every engine; the other 2 are engine-specific.

In the Specialty - For Lifted Vehicles grade, TRAKMOTIVE supplies 1 part: grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. A representative part number is TRAKMOTIVE NI8229XTT.

Standard Replacement: 3 parts, from GSP, TOP NOTCH and TRAKMOTIVE. A representative part number is GSP NCV53127.

This group includes TRAKMOTIVE NI8229XTT, GSP NCV53127 and TOP NOTCH TN13138 and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

2 CV Joint Boot parts for the 2019 Nissan Frontier come from BECK/ARNLEY. Every part fits both the 2.5L L4 and the 4.0L V6.

Listed part numbers: BECK/ARNLEY 1032505 and BECK/ARNLEY 1032867.

This table covers the slingers that keep gear oil off the pinion seal. Read more

This group shows a single part: DANA 2002305.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts for the 2019 Nissan Frontier come from TIMKEN. Every part fits both the 2.5L L4 and the 4.0L V6.

Listed part numbers: TIMKEN 100712V, TIMKEN SL260486 and TIMKEN SL260504.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

14 Drive Shaft parts are listed for the 2019 Nissan Frontier, from CARDONE, DORMAN, SKP and 4 other brands. SKP SK938209 carries the "Popular" badge. 5 parts fit every engine; the other 9 are engine-specific.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Drive Shaft Center Support Bearing parts are listed for the 2019 Nissan Frontier, from SKP, ANCHOR, DANA and 2 other brands. ANCHOR 6071 carries the "Popular" badge. All of them fit every engine offered in the 2019 Frontier.

Economy: 1 part, from SKP. A representative part number is SKP SKM6071.

The Standard Replacement section: 4 options from ANCHOR, DANA, PIONEER and 1 other brand. ANCHOR 6071 is listed in this group.

Listed part numbers: ANCHOR 6071, SKP SKM6071 and DANA 5016003, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

29 Gear Oil parts for the 2019 Nissan Frontier come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is VALVOLINE VV982. They are grouped as SAE 75W-140, SAE 75W-90 and SAE 80W-90, with SAE 75W-90 the largest group at 12 parts from VALVOLINE, LUCAS OIL, MOBIL and 1 other brand.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

16 Transfer Case Fluid parts for the 2019 Nissan Frontier come from 5 brands — VALVOLINE, IDEMITSU, PENTOSIN and 2 other brands. The "Popular" part is ACDELCO 109243.

The ATF +4 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. PENTOSIN 1058112 is listed in this group.

The Dexron section lists 4 options from VALVOLINE and ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

In the Matic S grade, IDEMITSU supplies 1 part: grouped under the catalog's "Matic S" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040101750.

The Mercon section lists 1 option from VALVOLINE — grouped under the catalog's "Mercon" designation — the notes column spells out what sets them apart. VALVOLINE 822345 is listed in this group.

The Multi-Vehicle section lists 6 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Transfer Case Input Shaft Bearing parts for the 2019 Nissan Frontier come from 4 brands — BCA, NATIONAL, NSK and 1 other brand. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include BCA NB110CC, NATIONAL 110CC and NSK 6010DDUC3, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2019 Nissan Frontier, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Frontier.

Listed part numbers: BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2019 Nissan Frontier, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Frontier.

Listed part numbers: NATIONAL 710696 and WJB / INMOTION PARTS WS710696.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

5 Transfer Case Motor parts are listed for the 2019 Nissan Frontier, from DORMAN, ACKOJA, LARES and 2 other brands. DORMAN 600919 carries the "Popular" badge. 4 parts fit every engine; the other 1 is engine-specific.

Part numbers include DORMAN 600919, ACKOJA A38860001 and LARES 30905, among others listed above.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Transfer Case Output Shaft Bearing parts are listed for the 2019 Nissan Frontier, from WJB / INMOTION PARTS, BCA and NATIONAL. WJB / INMOTION PARTS RB6207 carries the "Popular" badge. All of them fit every engine offered in the 2019 Frontier.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS RB6207.

The Standard Replacement section: 4 options from BCA and NATIONAL. BCA WE61445 is listed in this group.

Listed part numbers: WJB / INMOTION PARTS RB6207, WJB / INMOTION PARTS RB6208 and BCA WE61445, plus the other parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

3 Transfer Case Output Shaft Repair Sleeve parts for the 2019 Nissan Frontier come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.5L L4 and the 4.0L V6.

This group includes BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts for the 2019 Nissan Frontier come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. The "Popular" part is NATIONAL 710917. Every part fits both the 2.5L L4 and the 4.0L V6.

Part numbers include NATIONAL 710917, BCA NS710665 and NATIONAL 710665, among others listed above.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Shift Shaft Seal parts are listed for the 2019 Nissan Frontier, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Frontier.

Listed part numbers: BCA NS221710, NATIONAL 221710 and WJB / INMOTION PARTS WS221710.

This table covers the U-joints in the driveshaft. Read more

43 Universal Joint parts for the 2019 Nissan Frontier come from 7 brands — DANA, SKF, GMB and 4 other brands. The "Popular" part is DANA 15153X. Economy, Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 20 parts.