2018 Nissan Rogue Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts for the 2018 Nissan Rogue come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

Part numbers include SKF 14473A, TIMKEN SL260464 and WJB / INMOTION PARTS WS14473A.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

32 CV Axle parts for the 2018 Nissan Rogue come from 4 brands — GSP, TRAKMOTIVE, TOP NOTCH and 1 other brand. The "Popular" part is TOP NOTCH TN13110XD. Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 14 parts.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

7 CV Joint Boot parts for the 2018 Nissan Rogue come from 4 brands — MEVOTECH, BECK/ARNLEY, GKN and 1 other brand. The "Popular" part is MEVOTECH DX655. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

Part numbers include MEVOTECH DX655, MEVOTECH DX787 and ACKOJA A389767, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2018 Nissan Rogue come from 2 brands — WJB / INMOTION PARTS and BCA. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT30207 is listed in this group.

In the Standard Replacement grade, BCA supplies 1 part: built to original-equipment specification. A representative part number is BCA NB30207.

Part numbers include WJB / INMOTION PARTS WT30207 and BCA NB30207.

This table covers the bearings and races on the differential pinion. Read more

4 Differential Pinion Bearing / Race parts are listed for the 2018 Nissan Rogue, from WJB / INMOTION PARTS and BCA. All of them fit every engine offered in the 2018 Rogue.

Economy: 2 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA32.

The Standard Replacement section: 2 options from BCA. BCA NBA32 is listed in this group.

Listed part numbers: WJB / INMOTION PARTS WTA32, WJB / INMOTION PARTS WT32206 and BCA NBA32, plus the other parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: TIMKEN SL260484.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

3 Differential Repair Sleeve parts are listed for the 2018 Nissan Rogue, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2018 Rogue.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2018 Nissan Rogue, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2018 Rogue.

This group includes NATIONAL 710986 and WJB / INMOTION PARTS WS710986.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

10 Drive Shaft parts are listed for the 2018 Nissan Rogue, from ACKOJA, DORMAN, WJB / INMOTION PARTS and 4 other brands. TOP NOTCH TN5313PS carries the "Popular" badge. 5 parts fit every engine; the other 5 are engine-specific.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

8 Gear Oil parts for the 2018 Nissan Rogue come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

The SAE 75W-90 section lists 1 option from MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV831 is listed in this group.

This group includes MOBIL 104361, VALVOLINE VV831 and LUCAS OIL 10043 and the remaining parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

8 Transfer Case Fluid parts for the 2018 Nissan Rogue come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

The SAE 75W-90 section: 1 option from MOBIL. MOBIL 104361 is listed in this group.

The SAE 80W-90 section: 7 options from VALVOLINE and LUCAS OIL. VALVOLINE VV831 is listed in this group.

Part numbers include MOBIL 104361, VALVOLINE VV831 and LUCAS OIL 10043, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

2 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2018 Nissan Rogue, from BCA and WJB / INMOTION PARTS. All of them fit every engine offered in the 2018 Rogue.

This group includes BCA NS99220 and WJB / INMOTION PARTS WS99220.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Nissan Rogue — NATIONAL 711164.