2018 Nissan Rogue Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2018 Nissan Rogue — TOPLINE ISBD42.

This table covers the chains that drive the balance shafts. Read more

6 Balance Shaft Chain parts for the 2018 Nissan Rogue come from 4 brands — MELLING, CLOYES, PREFERRED COMPONENTS INC and 1 other brand. The "Popular" part is CLOYES C902.

In the Chain Only grade, CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand supply 4 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is CLOYES C902.

The Kit section lists 2 options from MELLING — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. MELLING 31053SX is listed in this group.

Part numbers include CLOYES C902, MELLING 1053 and PREFERRED COMPONENTS INC C766A, among others listed above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Chain Tensioner parts are listed for the 2018 Nissan Rogue, from MELLING, CLOYES, FVP and 2 other brands. MELLING BT7013 carries the "Popular" badge.

This group includes MELLING BT7013 and CLOYES 95606 and the remaining parts above.

This table covers the Balance Shaft sprockets. Read more

3 Balance Shaft Sprocket parts for the 2018 Nissan Rogue come from 3 brands — MELLING, PREFERRED COMPONENTS INC and S.A. GEAR. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include MELLING S945, PREFERRED COMPONENTS INC G56320C and S.A. GEAR S1304.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Nissan Rogue — SCHAEFFLER SS3362.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2018 Nissan Rogue come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH ECR117 and TOPLINE CRD42.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 2018 Nissan Rogue come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand.

This group includes ENGINETECH BB1005, ITM ENGINE COMPONENTS 4B9660 and KING ENGINE BEARINGS CR4533SI and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Conversion / Lower Gasket Set parts for the 2018 Nissan Rogue come from 7 brands — AJUSA, TOPLINE, APEX and 4 other brands. The "Popular" part is APEX ACS5051.

This group includes APEX ACS5051, ENGINETECH NI25CSA and AJUSA 54341000 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Crankshaft Main Bearing parts are listed for the 2018 Nissan Rogue, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1004 carries the "Popular" badge.

This group includes ENGINETECH BC1004, MAHLE / CLEVITE MS2263A and ITM ENGINE COMPONENTS 5M9545 and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts are listed for the 2018 Nissan Rogue, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2018 Rogue.

Listed part numbers: NATIONAL 99181 and WJB / INMOTION PARTS WS99181.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

29 Crankshaft Seal parts are listed for the 2018 Nissan Rogue, from VICTOR REINZ, FEL-PRO, APEX and 8 other brands. AJUSA 15045100 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

12 Cylinder Head Bolt parts for the 2018 Nissan Rogue come from 8 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 5 other brands. The "Popular" part is APEX AHB556.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 2018 Nissan Rogue come from 6 brands — APEX, AJUSA, FEL-PRO and 3 other brands. The "Popular" part is APEX AHG567.

Listed part numbers: APEX AHG567, FEL-PRO 26659PT and AJUSA 10227000, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts for the 2018 Nissan Rogue come from 5 brands — AJUSA, FEL-PRO, APEX and 2 other brands. The "Popular" part is APEX AHS5067.

Part numbers include APEX AHS5067, ITM ENGINE COMPONENTS 0910523 and AJUSA 52660900, among others listed above.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302139.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2018 Nissan Rogue.

This group includes KAT'S HEATERS 28400 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

6 Engine Cover parts for the 2018 Nissan Rogue come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO NI1228162. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

This group includes TECHPRO NI1228162, TECHPRO NI1228157 and TECHPRO NI1228168 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2018 Nissan Rogue come from 2 brands — AJUSA and TOPLINE.

This group includes AJUSA 50588100, AJUSA 50433300 and TOPLINE CGSD42B.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2018 Nissan Rogue — TOPLINE EVD42N.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2018 Nissan Rogue come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS GDF603 and WELLS 5T5018.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2018 Nissan Rogue come from 4 brands — DORMAN, ULTRA-POWER, ATP and 1 other brand. The "Popular" part is ULTRA-POWER 594620.

This group includes ULTRA-POWER 594620, ATP 102419 and DAYCO PB1576N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts for the 2018 Nissan Rogue come from 6 brands — AJUSA, FEL-PRO, APEX and 3 other brands. The "Popular" part is FEL-PRO MS97249.

Listed part numbers: FEL-PRO MS97249, AJUSA 13277000 and AJUSA 13276800, plus the other parts above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: DORMAN 911723.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2018 Nissan Rogue, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AMS5582, FEL-PRO MS97150 and MAHLE / CLEVITE MS19404, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2018 Nissan Rogue, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH IM4398 and TOPLINE IVD42N.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts are listed for the 2018 Nissan Rogue, from DEA / MARMON RIDE CONTROL, SKP, SUSPENSIA and 4 other brands. SKP SKM9903 carries the "Popular" badge.

In the Economy grade, SKP and SUSPENSIA supply 2 parts: the catalog's value-priced group. A representative part number is SKP SKM9903.

The Standard Replacement section lists 8 options from DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands — built to original-equipment specification. DEA / MARMON RIDE CONTROL A4376 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2018 Nissan Rogue — ANCHOR 300739.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts are listed for the 2018 Nissan Rogue, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 31 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

11 Oil Cooler parts are listed for the 2018 Nissan Rogue, from STANDARD MOTOR PRODUCTS, DORMAN, NISSENS and 3 other brands. DORMAN 918935 carries the "Popular" badge.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Cooler Gasket parts for the 2018 Nissan Rogue come from 5 brands — MAHLE / CLEVITE, APEX, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO 71355.

This group includes FEL-PRO 71355, MAHLE / CLEVITE B32528 and APEX AOM6029 and the remaining parts above.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Cooler Seal parts for the 2018 Nissan Rogue come from 3 brands — DORMAN, FEL-PRO and ULTRA-POWER.

This group includes DORMAN 926454, FEL-PRO ES73076 and ULTRA-POWER 917191.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2018 Nissan Rogue, from DORMAN, AGS, BECK/ARNLEY and 2 other brands. DORMAN 090038 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

This group includes DORMAN 090038, AGS ODP00011 and BECK/ARNLEY 0160116 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2018 Nissan Rogue come from 4 brands — DORMAN, AJUSA, APEX and 1 other brand. The "Popular" part is DORMAN 097134. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.

Part numbers include DORMAN 097134, AJUSA 01140600 and APEX ADP1904, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2018 Nissan Rogue, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge. 4 parts fit every engine; the other 1 is engine-specific.

This group includes MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 2018 Nissan Rogue, from VARIOUS MFR, BOSCH, WIX and 11 other brands. MOBIL M1108A carries the "Popular" badge. 17 parts fit every engine; the other 1 is engine-specific.

Economy: 6 parts, from VARIOUS MFR, BOSCH, FRAM and 2 other brands. A representative part number is BOSCH 72230WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section: 10 options from BOSCH, MOTORCRAFT, WIX and 7 other brands. BOSCH 3300 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

10 Oil Pan parts for the 2018 Nissan Rogue come from 6 brands — SPECTRA PREMIUM, DORMAN, ULTRA-POWER and 3 other brands. The "Popular" part is SKP SK264571.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2018 Nissan Rogue, from MAHLE / CLEVITE and VICTOR REINZ. 1 part fits every engine; the other 1 is engine-specific.

This group includes MAHLE / CLEVITE OS32470 and VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts are listed for the 2018 Nissan Rogue, from MELLING, SEALED POWER and TOPLINE.

Part numbers include MELLING M585, MELLING M503 and SEALED POWER 22443706, among others listed above.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts for the 2018 Nissan Rogue come from 2 brands — CLOYES and S.A. GEAR.

This group includes CLOYES C725F and S.A. GEAR C1225.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2018 Nissan Rogue — S.A. GEAR 91406.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts for the 2018 Nissan Rogue come from 3 brands — CLOYES, FVP and S.A. GEAR. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include CLOYES S945 and S.A. GEAR S1304, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2018 Nissan Rogue come from 2 brands — MAHLE / CLEVITE and TOPLINE.

In the Premium grade, MAHLE / CLEVITE supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 2244040.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAD42B.

This group includes MAHLE / CLEVITE 2244040 and TOPLINE PAD42B.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

TOPLINE supplies both parts for the 2018 Nissan Rogue.

This group includes TOPLINE PBTO39 and TOPLINE PBD42.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 2018 Nissan Rogue come from 4 brands — HASTINGS MANUFACTURING, SEALED POWER, MAHLE / CLEVITE and 1 other brand. The "Popular" part is SEALED POWER E1018KC.

Premium: 2 parts, from SEALED POWER and MAHLE / CLEVITE. A representative part number is SEALED POWER E1018KC.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4516.

Part numbers include SEALED POWER E1018KC, MAHLE / CLEVITE 42286CP and HASTINGS MANUFACTURING 2C4516, among others listed above.