38 Wheel parts are listed for the 2018 Nissan Rogue, in 8 part types, covering both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2018 Nissan Rogue, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. Most of the listed parts are Lug Nut (13 parts), Lug Nut Lock (7 parts) and Tire Pressure Monitoring System (TPMS) Stem / Service Kit (7 parts). The other 5 part types cover the remaining 11 parts.
The 2018 Nissan Rogue was sold with both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4. 37 parts fit every engine; the other 1 is engine-specific. Each part shows which engine(s) it fits.
9 brands supply wheel parts for the 2018 Nissan Rogue, led by DORMAN (14 parts), PTC (5 parts) and MCGARD (4 parts), plus 6 more brands. Quality grades include Daily Driver, Economy and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Nissan Rogue. 8 parts have it, including DORMAN 711401 (Lug Nut) and DORMAN 711455 (Lug Nut Lock). Each part number opens a page with every vehicle that part fits.
Lug Nut
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2018 Rogue engines | 711401 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Popular Fits: all 2018 Rogue engines | 611099 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 611065 | 🇺🇸 US 🇨🇦 CA | SteelOpen End | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 611113 | 🇺🇸 US 🇨🇦 CA | SteelOpen End | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 611114 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 611174 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 611260 | 🇺🇸 US 🇨🇦 CA | Open EndSteel | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 611317 | 🇺🇸 US 🇨🇦 CA | Closed EndSteel | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PTC Popular Fits: all 2018 Rogue engines | 98274 | 🇺🇸 US 🇨🇦 CA | 25.8mm LengthM12-1.25 Acorn | View on Amazon |
| PTC Fits: all 2018 Rogue engines | 98036 | 🇺🇸 US 🇨🇦 CA | Zinc FinishM12-1.25 Standard | View on Amazon |
| PTC Fits: all 2018 Rogue engines | 98079 | 🇺🇸 US 🇨🇦 CA | Chrome FinishM12-1.25 Standard | View on Amazon |
| PTC Fits: all 2018 Rogue engines | 98080 | 🇺🇸 US 🇨🇦 CA | 29mm LengthM12-1.25 Acorn | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: all 2018 Rogue engines | 64003 | 🇺🇸 US 🇨🇦 CA | Cone Seat Style Lug Nuts | View on Amazon |
This table covers the lug nuts that hold each wheel on the hub.
13 Lug Nut parts are listed for the 2018 Nissan Rogue, from DORMAN, PTC and MCGARD. DORMAN 711401 carries the "Popular" badge. All of them fit every engine offered in the 2018 Rogue.
The Daily Driver section lists 8 options from DORMAN — grouped for everyday commuting duty. DORMAN 711401 is listed in this group.
In the Economy grade, PTC supplies 4 parts: the catalog's value-priced group. A representative part number is PTC 98274.
The Premium section lists 1 option from MCGARD — a step above OE specification in materials, tolerances or warranty terms. MCGARD 64003 is listed in this group.
Lug Nut & Lock Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2018 Rogue engines | 712415 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M12-1.25 | View on Amazon |
This table covers the Lug Nut & Lock kits.
This group shows a single part: DORMAN 712415.
Lug Nut Lock
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2018 Rogue engines | 711455 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M12-1.25 | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 711425 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M12-1.25 | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 713475 | 🇺🇸 US 🇨🇦 CA | Carbon SteelThread Size: M12-1.25 | View on Amazon |
| DORMAN Fits: all 2018 Rogue engines | 711445 | 🇺🇸 US 🇨🇦 CA | ChromeThread Size: M12-1.25 | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Popular Fits: all 2018 Rogue engines | 24154 | 🇺🇸 US 🇨🇦 CA | Cone Seat Exposed Style Wheel Locks(4 Locks / 1 Key) | View on Amazon |
| MCGARD Fits: all 2018 Rogue engines | 24013 | 🇺🇸 US 🇨🇦 CA | Cone SeatUnder Hub Cap | View on Amazon |
| MCGARD Fits: all 2018 Rogue engines | 25254 | 🇺🇸 US 🇨🇦 CA | Tuner Style Cone Seat Wheel Locks(4 Locks / 1 Key) | View on Amazon |
This table covers the locking lug nuts and keys.
7 Lug Nut Lock parts for the 2018 Nissan Rogue come from 2 brands — DORMAN and MCGARD. The "Popular" part is DORMAN 711455. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.
Daily Driver: 4 parts, from DORMAN. A representative part number is DORMAN 711455.
Premium: 3 parts, from MCGARD. A representative part number is MCGARD 24154.
Listed part numbers: DORMAN 711455, DORMAN 711425 and DORMAN 713475, plus the other parts above.
Lug Stud
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2018 Rogue engines | 610378 | 🇺🇸 US 🇨🇦 CA | Thread Size: M12-1.25 | View on Amazon |
| PTC Fits: all 2018 Rogue engines | 97293 | 🇺🇸 US 🇨🇦 CA | Fits FrontM12-1.25 Serrated Wheel Stud | View on Amazon |
This table covers the Lug studs.
2 Lug Stud parts for the 2018 Nissan Rogue come from 2 brands — DORMAN and PTC. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.
This group includes DORMAN 610378 and PTC 97293.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VDO / CONTINENTAL Fits: all 2018 Rogue engines | SE10005 | 🇺🇸 US 🇨🇦 CA | Redi-SensorMulti-application Sensor | View on Amazon |
| VDO / CONTINENTAL Fits: all 2018 Rogue engines | SE10008 | 🇺🇸 US 🇨🇦 CA | Redi-Sensor433.92 MHz | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular Fits: all 2018 Rogue engines | RDE222V21 | 🇺🇸 US 🇨🇦 CA | OE Quality 433MHZ Replacement SensorIncludes RDV021 Silver 43mm Metal Valve | View on Amazon |
| SCHRADER Fits: all 2018 Rogue engines | 29113 | 🇺🇸 US 🇨🇦 CA | ProgrammedIncludes Mounting Hardware | View on Amazon |
| VDO / CONTINENTAL Fits: all 2018 Rogue engines | SE55561 | 🇺🇸 US 🇨🇦 CA | Continental OE SensorProgrammed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
5 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2018 Nissan Rogue, from VDO / CONTINENTAL, BH SENS and SCHRADER. BH SENS RDE222V21 carries the "Popular" badge. All of them fit every engine offered in the 2018 Rogue.
In the Aftermarket / Multi-Application (Programmed) grade, VDO / CONTINENTAL supplies 2 parts: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is VDO / CONTINENTAL SE10005.
The OE Replacement (Programmed) section lists 3 options from BH SENS, SCHRADER and VDO / CONTINENTAL — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE222V21 is listed in this group.
This group includes BH SENS RDE222V21, VDO / CONTINENTAL SE10005 and VDO / CONTINENTAL SE10008 and the remaining parts above.
Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Fits: all 2018 Rogue engines | 295002 | 🇺🇸 US 🇨🇦 CA | Schrader TPMS Retrofit Kit For trailers, Tow behind campers, and RVSPack of 2 | View on Amazon |
This table covers the Tire Pressure Monitoring System (TPMS) Sensor Retrofit kits.
This group shows a single part: SCHRADER 295002.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 2018 Rogue engines | TPM2011VK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor ValveSold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: all 2018 Rogue engines | TPM2012VBK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| DILL AIR CONTROL Fits: all 2018 Rogue engines | VS45 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System ValveOPT Chrome Plated Clamp-In Valve Stem with Clip Design | View on Amazon |
| SCHRADER Fits: all 2018 Rogue engines | 20043 | 🇺🇸 US 🇨🇦 CA | Snap-In assembly componentsPack of 50 | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Rogue engines | TPM2012VK | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Rogue engines | TPM2012VCK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| VDO / CONTINENTAL Fits: all 2018 Rogue engines | SE54196 | 🇺🇸 US 🇨🇦 CA | Continental OE Sensor KitMulti-application Sensor | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
7 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2018 Nissan Rogue come from 4 brands — STANDARD MOTOR PRODUCTS, DILL AIR CONTROL, SCHRADER and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TPM2011VK. Every part fits both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4.
Part numbers include STANDARD MOTOR PRODUCTS TPM2011VK, STANDARD MOTOR PRODUCTS TPM2012VBK and DILL AIR CONTROL VS45, among others listed above.
Wheel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 2.0L L4 ELECTRIC/GAS | NI5990108 | 🇺🇸 US | 17x4"Spare | View on Amazon |
| TECHPRO Fits: all 2018 Rogue engines | NI5990128 | 🇺🇸 US 🇨🇦 CA | 17x7" | View on Amazon |
This table covers the wheels listed for this hub.
TECHPRO supplies both parts for the 2018 Nissan Rogue. 1 part fits every engine; the other 1 is engine-specific.
Listed part numbers: TECHPRO NI5990108 and TECHPRO NI5990128.
Buying Wheel Parts for a 2018 Nissan Rogue
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Match the engine first. Some wheel parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Lug Nut and Lug Nut Lock .
Frequently Asked Questions
How many wheel parts fit the 2018 Nissan Rogue?
Our catalog currently lists 38 wheel parts for the 2018 Nissan Rogue across 8 subcategories and 9 brands, covering both the 2.0L L4 ELECTRIC/GAS and the 2.5L L4. Each part is matched to the engine(s) it fits.
Do wheel parts differ between 2018 Nissan Rogue engines?
Some do. 37 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of wheel problems on a 2018 Nissan Rogue?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Nissan Rogue was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Nissan Rogue?
First match the engine — each row shows which engine(s) the part fits. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Nissan Rogue
Wheel Parts for Other Nissan Rogue Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.