2016 Rolls-Royce Phantom Suspension Parts

Engine:
6.7L V12

10 Suspension parts are listed for the 2016 Rolls-Royce Phantom, in 5 part types, covering the 6.7L V12 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2016 Rolls-Royce Phantom, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. 8 parts of the 10 listed are Air Compressor (5 parts), Control Arm (2 parts) and Control Arm Nut (1 part). The other 2 part types cover the remaining 2 parts.

Air Compressor

Brand Part Number Markets Notes Buy
SKP Popular SKAS063
🇺🇸 US 🇨🇦 CA
Support Bracket Not Included
Fitment notes — SKP SKAS063
Support Bracket Not Included
with 4 Corner Air Suspension
View on
Amazon
ARNOTT P5182
🇺🇸 US 🇨🇦 CA
View on
Amazon
ARNOTT P2494
🇺🇸 US 🇨🇦 CA
ArnottAir Suspension Compressor
Fitment notes — ARNOTT P2494
ArnottAir Suspension CompressorWabco
WABCO OES
View on
Amazon
FAMOUS BRAND 2730106218
🇺🇸 US 🇨🇦 CA
Suspension Air CompressorWabco OES
Fitment notes — FAMOUS BRAND 2730106218
Suspension Air CompressorWabco OESISG
View on
Amazon
FCS KY031
🇺🇸 US 🇨🇦 CA
with 4-Corner Air Suspension Only
View on
Amazon

This table covers the Air compressors. Typical signs include no cold air, rapid clutch cycling, or a growl when the clutch engages. Replace the drier and evacuate the system whenever the circuit is opened.

Control Arm

Daily Driver

Brand Part Number Markets Notes Buy
MOOG RK620185
🇺🇸 US 🇨🇦 CA
Complete Arm with Ball Joint
Fitment notes — MOOG RK620185
Complete Arm with Ball Joint
Rear Upper Forward
View on
Amazon

Economy

Brand Part Number Markets Notes Buy
ULTRA-POWER RK620185
🇺🇸 US 🇨🇦 CA
Complete Arm with Ball Joint
Fitment notes — ULTRA-POWER RK620185
Complete Arm with Ball Joint
Rear Upper Forward
View on
Amazon

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.

Control Arm Nut

Brand Part Number Markets Notes Buy
REIN HWN0077
🇺🇸 US 🇨🇦 CA
Rear Upper Inner12 x 1.5-10mm
View on
Amazon

This table covers the Control Arm nuts.

Ride Height Sensor

Brand Part Number Markets Notes Buy
ARNOTT RH4437
🇺🇸 US 🇨🇦 CA
Fits Rear
Fitment notes — ARNOTT RH4437
Fits:
Rear
or:
Front
View on
Amazon

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Sway Bar Bushing

Brand Part Number Markets Notes Buy
DORMAN 540229
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Buying Suspension Parts for a 2016 Rolls-Royce Phantom

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Confirm you have the 6.7L V12 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Air Compressor and Control Arm .

Frequently Asked Questions

How many suspension parts fit the 2016 Rolls-Royce Phantom?

Our catalog currently lists 10 suspension parts for the 2016 Rolls-Royce Phantom across 5 subcategories and 8 brands, covering the 6.7L V12 engine. Each part is matched to the engine(s) it fits.

What are the signs of suspension problems on a 2016 Rolls-Royce Phantom?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Rolls-Royce Phantom was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Rolls-Royce Phantom?

Every part on this page is matched to the 6.7L V12 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Rolls-Royce Phantom

Suspension Parts for Other Rolls-Royce Phantom Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.