This page lists 4 suspension parts for the 2017 Rolls-Royce Phantom, across 3 part types, covering the 6.7L V12 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2017 Rolls-Royce Phantom, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. All 4 listed parts are Control Arm (2 parts), Control Arm Nut (1 part) and Ride Height Sensor (1 part).
Every part on this page is matched to the 6.7L V12 — the only engine offered in the 2017 Rolls-Royce Phantom.
The most listed brands for 2017 Rolls-Royce Phantom suspension parts are MOOG (1 part), ULTRA-POWER (1 part) and REIN (1 part), plus 1 more brand. Quality grades include Daily Driver and Economy.
Each part number listed for the 2017 Rolls-Royce Phantom opens a page with every vehicle that part fits.
Control Arm
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG | RK620185 | 🇺🇸 US 🇨🇦 CA | Complete Arm with Ball Joint | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER | RK620185 | 🇺🇸 US 🇨🇦 CA | Complete Arm with Ball Joint | View on Amazon |
This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.
2 Control Arm parts for the 2017 Rolls-Royce Phantom come from 2 brands — MOOG and ULTRA-POWER.
In the Daily Driver grade, MOOG supplies 1 part: grouped for everyday commuting duty. A representative part number is MOOG RK620185.
The Economy section lists 1 option from ULTRA-POWER — the catalog's value-priced group. ULTRA-POWER RK620185 is listed in this group.
This group includes MOOG RK620185 and the remaining parts above.
Control Arm Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWN0077 | 🇺🇸 US 🇨🇦 CA | Rear Upper Inner12 x 1.5-10mm | View on Amazon |
This table covers the Control Arm nuts.
One part is listed for the 2017 Rolls-Royce Phantom — REIN HWN0077.
Ride Height Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT | RH4437 | 🇺🇸 US 🇨🇦 CA | Fits Rear | View on Amazon |
This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
This group shows a single part: ARNOTT RH4437.
Buying Suspension Parts for a 2017 Rolls-Royce Phantom
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 6.7L V12 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Control Arm and Control Arm Nut .
Frequently Asked Questions
How many suspension parts fit the 2017 Rolls-Royce Phantom?
Our catalog currently lists 4 suspension parts for the 2017 Rolls-Royce Phantom across 3 subcategories and 4 brands, covering the 6.7L V12 engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2017 Rolls-Royce Phantom?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2017 Rolls-Royce Phantom was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2017 Rolls-Royce Phantom?
Every part on this page is matched to the 6.7L V12 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2017 Rolls-Royce Phantom
Suspension Parts for Other Rolls-Royce Phantom Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.