1984 Saab 900 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 1984 Saab 900, from PROFESSIONAL PARTS SWEDEN and ITM ENGINE COMPONENTS. All of them fit every engine offered in the 1984 900.

Part numbers include ITM ENGINE COMPONENTS 4B9023, PROFESSIONAL PARTS SWEDEN 21347650 and PROFESSIONAL PARTS SWEDEN 21347651.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 1984 Saab 900, from AJUSA and ITM ENGINE COMPONENTS. All of them fit every engine offered in the 1984 900.

Listed part numbers: AJUSA 54050400 and ITM ENGINE COMPONENTS 0929102.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ITM ENGINE COMPONENTS 5M9144.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1984 Saab 900 come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. The "Popular" part is NATIONAL 99363. Every part fits both the 2.0L L4 and the 2.0L L4 Turbocharged.

This group includes NATIONAL 99363, WJB / INMOTION PARTS WS99189 and BCA NS99189 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts for the 1984 Saab 900 come from 7 brands — ELRING, VICTOR REINZ, NATIONAL and 4 other brands. The "Popular" part is ELRING 330965. 7 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: ELRING 330965, NATIONAL 3772 and WJB / INMOTION PARTS WS3772, plus the other parts above.

This table covers the Crankshaft Thrust washers. Read more

2 Crankshaft Thrust Washer parts are listed for the 1984 Saab 900, from ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: ITM ENGINE COMPONENTS 1T9127 and PROFESSIONAL PARTS SWEDEN 21347270.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 1984 Saab 900, from AJUSA, ELRING and VICTOR REINZ. 2 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: AJUSA 81011900, ELRING 221280 and VICTOR REINZ 143222701.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 1984 Saab 900, from VICTOR REINZ, BECK/ARNLEY, ELRING and 2 other brands. BECK/ARNLEY 0351717 carries the "Popular" badge. 5 parts fit every engine; the other 2 are engine-specific.

This group includes BECK/ARNLEY 0351717, ELRING 586598 and VICTOR REINZ 613523500 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 1984 Saab 900, from VICTOR REINZ, ELRING, AJUSA and 1 other brand. ELRING 894258 carries the "Popular" badge. 4 parts fit every engine; the other 1 is engine-specific.

This group includes ELRING 894258, AJUSA 52078700 and ITM ENGINE COMPONENTS 0919110 and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: DORMAN 570006.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11438.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1984 Saab 900 — AJUSA 50089500.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ITM ENGINE COMPONENTS RX9154.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 1984 Saab 900 — DORMAN 555068.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

6 Harmonic Balancer parts are listed for the 1984 Saab 900, from DAYCO, PIONEER, ATP and 1 other brand. DAYCO PB1338N carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.

Part numbers include DAYCO PB1338N, ATP 102092 and DAYCO PB1328N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 1984 Saab 900, from PROFESSIONAL PARTS SWEDEN, VICTOR REINZ, AJUSA and 2 other brands. PROFESSIONAL PARTS SWEDEN 61345208 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

Listed part numbers: PROFESSIONAL PARTS SWEDEN 61345208, PROFESSIONAL PARTS SWEDEN 21342315 and AJUSA 13053100, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ITM ENGINE COMPONENTS RV9153.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts for the 1984 Saab 900 come from 2 brands — PROFESSIONAL PARTS SWEDEN and DEA / MARMON RIDE CONTROL. The "Popular" part is PROFESSIONAL PARTS SWEDEN 62345668. 6 parts fit every engine; the other 1 is engine-specific.

The Economy section lists 5 options from PROFESSIONAL PARTS SWEDEN — the catalog's value-priced group. PROFESSIONAL PARTS SWEDEN 62345668 is listed in this group.

In the Standard Replacement grade, DEA / MARMON RIDE CONTROL supplies 2 parts: built to original-equipment specification. A representative part number is DEA / MARMON RIDE CONTROL A7038.

Listed part numbers: PROFESSIONAL PARTS SWEDEN 62345668, PROFESSIONAL PARTS SWEDEN 62345650 and PROFESSIONAL PARTS SWEDEN 62343408, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

15 Oil parts for the 1984 Saab 900 come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195. Every part fits both the 2.0L L4 and the 2.0L L4 Turbocharged.

The Full Synthetic section lists 7 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 6 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.

The Synthetic Blend section lists 2 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 1984 Saab 900 come from 4 brands — DORMAN, AGS, ELRING and 1 other brand. The "Popular" part is DORMAN 090033. 8 parts fit every engine; the other 1 is engine-specific.

In the Piggyback grade, DORMAN supplies 1 part: grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 65229.

In the Twist Drain grade, DORMAN supplies 1 part: grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 092020.

In the Universal grade, DORMAN supplies 1 part: grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 65102.

6 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: DORMAN 090033, DORMAN 65229 and DORMAN 092020, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1984 Saab 900, from AJUSA and DORMAN. All of them fit every engine offered in the 1984 900.

This group includes AJUSA 21012200 and DORMAN 097135.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 1984 Saab 900 come from 13 brands — BOSCH, PROFESSIONAL PARTS SWEDEN, VARIOUS MFR and 10 other brands. The "Popular" part is WIX 51348XP. 17 parts fit every engine; the other 1 is engine-specific.

The Economy section: 7 options from PROFESSIONAL PARTS SWEDEN, BOSCH, FRAM and 3 other brands. BOSCH 72161WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51348XP is listed in this group.

Standard Replacement: 9 parts, from MOTORCRAFT, DENSO, WIX and 5 other brands. A representative part number is DENSO 1502010.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 1984 Saab 900 come from 5 brands — FEL-PRO, AJUSA, ELRING and 2 other brands. The "Popular" part is FEL-PRO OS30659. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: FEL-PRO OS30659, AJUSA 14031200 and ELRING 514943, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1984 Saab 900 — PROFESSIONAL PARTS SWEDEN 21345824.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: ITM ENGINE COMPONENTS RB4519.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 1984 Saab 900 — ITM ENGINE COMPONENTS 0216340.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 1984 Saab 900, from ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN.

Economy: 1 part, from PROFESSIONAL PARTS SWEDEN. A representative part number is PROFESSIONAL PARTS SWEDEN 21349779.

The Standard Replacement section: 1 option from ITM ENGINE COMPONENTS. ITM ENGINE COMPONENTS 13108 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes PROFESSIONAL PARTS SWEDEN 21349779 and ITM ENGINE COMPONENTS 13108 and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

One part is listed for the 1984 Saab 900 — ITM ENGINE COMPONENTS 70102.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: ITM ENGINE COMPONENTS 60145.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: CORTECO 14329.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

This group shows a single part: SCHAEFFLER SR3503.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1984 Saab 900 — AJUSA JTC11109.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Valve Cover Gasket parts for the 1984 Saab 900 come from 5 brands — VICTOR REINZ, PROFESSIONAL PARTS SWEDEN, ELRING and 2 other brands. The "Popular" part is ELRING 892930. 8 parts fit every engine; the other 1 is engine-specific.

Part numbers include ELRING 892930, VICTOR REINZ 711300800 and AJUSA 11021700, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: ITM ENGINE COMPONENTS VG964BR.

This table covers the Valve seats. Read more

4 Valve Seat parts are listed for the 1984 Saab 900, from SBI, DURA-BOND and QUALCAST. All of them fit every engine offered in the 1984 900.

Listed part numbers: DURA-BOND 31715, QUALCAST 21175065 and SBI SB150070, plus the other parts above.

This table covers the Valve Spring retainers. Read more

One part is listed for the 1984 Saab 900 — ITM ENGINE COMPONENTS 051124.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 1984 Saab 900 come from 3 brands — ELRING, SBI and QUALCAST. The "Popular" part is ELRING 701289. 4 parts fit every engine; the other 2 are engine-specific.

Part numbers include ELRING 701289, SBI 1221075 and ELRING 825042, among others listed above.