1992 Saab 900 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 1992 Saab 900 come from 2 brands — ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN.

Listed part numbers: ITM ENGINE COMPONENTS 4B9023 and PROFESSIONAL PARTS SWEDEN 21347650.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1992 Saab 900 — ITM ENGINE COMPONENTS 5M9144.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

9 Crankshaft Repair Sleeve parts are listed for the 1992 Saab 900, from SCHAEFFLER, BCA, NATIONAL and 2 other brands. SCHAEFFLER SR3506 carries the "Popular" badge.

This group includes SCHAEFFLER SR3506, TIMKEN KWK99187 and BCA NS99189 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Crankshaft Seal parts are listed for the 1992 Saab 900, from ELRING, TIMKEN, PROFESSIONAL PARTS SWEDEN and 9 other brands. ELRING 330965 carries the "Popular" badge.

This table covers the Crankshaft Thrust washers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1T9127.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: VICTOR REINZ 143222701.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 1992 Saab 900 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 54678 and VICTOR REINZ 613524000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 1992 Saab 900 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO HS26697PT and VICTOR REINZ 023524001.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

3 Cylinder Repair Sleeve parts for the 1992 Saab 900 come from 2 brands — MELLING and ENGINETECH.

Listed part numbers: ENGINETECH ESL626, MELLING CSL626 and MELLING CSL726.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1992 Saab 900 — KAT'S HEATERS 11437.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 1992 Saab 900, from ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN.

Part numbers include ITM ENGINE COMPONENTS RX9465 and PROFESSIONAL PARTS SWEDEN 21341767.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Expansion Plug parts for the 1992 Saab 900 come from DORMAN.

Listed part numbers: DORMAN 555068 and DORMAN 570006.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 1992 Saab 900 come from 2 brands — DAYCO and DORMAN.

Part numbers include DAYCO PB1425N and DORMAN 594822.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 1992 Saab 900 come from 3 brands — PROFESSIONAL PARTS SWEDEN, ELRING and VICTOR REINZ.

Part numbers include ELRING 922448, PROFESSIONAL PARTS SWEDEN 61345208 and PROFESSIONAL PARTS SWEDEN 21346277, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1992 Saab 900 — ITM ENGINE COMPONENTS RV9465.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts are listed for the 1992 Saab 900, from DEA / MARMON RIDE CONTROL and WESTAR.

Listed part numbers: DEA / MARMON RIDE CONTROL A7041, DEA / MARMON RIDE CONTROL A7042 and WESTAR EM5462, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

31 Oil parts are listed for the 1992 Saab 900, from MOBIL, VALVOLINE, PENTOSIN and 1 other brand. MOBIL 125195 carries the "Popular" badge. Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 16 parts.

This table covers the Oil Cooler Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 1992 Saab 900 — PROFESSIONAL PARTS SWEDEN 87343706.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 1992 Saab 900, from DORMAN, AGS, ENGINETECH and 1 other brand. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: DORMAN 097135.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 1992 Saab 900, from BOSCH, VARIOUS MFR, WIX and 11 other brands. WIX 51348XP carries the "Popular" badge.

In the Economy grade, BOSCH, FRAM, FVP and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72161WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51348XP.

The Standard Replacement section lists 10 options from MOTORCRAFT, DENSO, WIX and 6 other brands — built to original-equipment specification. DENSO 1502010 is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 1992 Saab 900, from APEX, ELRING, FEL-PRO and 1 other brand.

Part numbers include APEX AOP923, ELRING 514943 and FEL-PRO OS30659, among others listed above.

This table covers the Oil Pump Drive gears. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21341779.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1992 Saab 900 — ITM ENGINE COMPONENTS RB4519.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 1992 Saab 900 come from HASTINGS MANUFACTURING.

Part numbers include HASTINGS MANUFACTURING 2C4997 and HASTINGS MANUFACTURING 2C4997S.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 1992 Saab 900 — PROFESSIONAL PARTS SWEDEN 21340127.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21340697.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 1992 Saab 900 come from PROFESSIONAL PARTS SWEDEN.

Part numbers include PROFESSIONAL PARTS SWEDEN 21349324 and PROFESSIONAL PARTS SWEDEN 21343505.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 1992 Saab 900 — PROFESSIONAL PARTS SWEDEN 21345086.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1992 Saab 900, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER SR3503 and SKF 99184.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1992 Saab 900 — SKF 18508.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Valve Cover Gasket parts are listed for the 1992 Saab 900, from ELRING, FEL-PRO, AJUSA and 5 other brands. ELRING 892930 carries the "Popular" badge.

Part numbers include ELRING 892930, FEL-PRO VS50409R and AJUSA 56001900, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts are listed for the 1992 Saab 900, from PROFESSIONAL PARTS SWEDEN and ITM ENGINE COMPONENTS.

Economy: 1 part, from PROFESSIONAL PARTS SWEDEN. A representative part number is PROFESSIONAL PARTS SWEDEN 21347388.

The Standard Replacement section: 1 option from ITM ENGINE COMPONENTS. ITM ENGINE COMPONENTS 0565069 is listed in this group.

Listed part numbers: PROFESSIONAL PARTS SWEDEN 21347388 and ITM ENGINE COMPONENTS 0565069.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts are listed for the 1992 Saab 900, from ELRING, APEX, FEL-PRO and 3 other brands. ELRING 701289 carries the "Popular" badge.

Part numbers include ELRING 701289, ELRING 825042 and APEX AVS9001, among others listed above.