1986 Saab 9000 Automatic Transmission Parts

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Filter parts are listed for the 1986 Saab 9000, from VARIOUS MFR, RAYBESTOS POWERTRAIN and PROFESSIONAL PARTS SWEDEN.

In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PT99775.

The Standard Replacement section lists 1 option from RAYBESTOS POWERTRAIN — built to original-equipment specification. RAYBESTOS POWERTRAIN 515502 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: VARIOUS MFR PT99775, RAYBESTOS POWERTRAIN 515502 and PROFESSIONAL PARTS SWEDEN 22345525.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

One part is listed for the 1986 Saab 9000 — TECHPRO SB4050100.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

5 Output Shaft Repair Sleeve parts are listed for the 1986 Saab 9000, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472, plus the other parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts are listed for the 1986 Saab 9000, from SKF, BCA, NATIONAL and 2 other brands. SKF 13945 carries the "Popular" badge.

This group includes SKF 13945, BCA NS223510 and NATIONAL 223510 and the remaining parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Pinion Bearing parts for the 1986 Saab 9000 come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTA35 is listed in this group.

Standard Replacement: 2 parts, from BCA and NATIONAL. A representative part number is BCA NBA35.

This group includes WJB / INMOTION PARTS WTA35, BCA NBA35 and NATIONAL A35.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 1986 Saab 9000 come from 3 brands — PA CARGO, PROFESSIONAL PARTS SWEDEN and PIONEER. The "Popular" part is PA CARGO K85900A.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK8500A is listed in this group.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 2 options from PA CARGO and PIONEER — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K85900A is listed in this group.

2 further parts sit outside the graded sections, with the same engine-level match.

This group includes PA CARGO K85900A, PA CARGO MRK8500A and PIONEER 750071 and the remaining parts above.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 1986 Saab 9000 come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2111 and SKF 692263.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

2 Torque Converter Repair Sleeve parts for the 1986 Saab 9000 come from 2 brands — SCHAEFFLER and WJB / INMOTION PARTS.

Listed part numbers: SCHAEFFLER SR3491 and WJB / INMOTION PARTS WS99168.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: WJB / INMOTION PARTS WS480479H.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BCA NB206.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

5 Transmission Fluid parts are listed for the 1986 Saab 9000, from VALVOLINE and IDEMITSU. VALVOLINE VV3246 carries the "Popular" badge.

In the Multi-Vehicle grade, VALVOLINE supplies 3 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

In the Type T-4 (Type T-IV) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040093750.

Part numbers include VALVOLINE VV3246, VALVOLINE 773775 and VALVOLINE 881051, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Transmission Mount parts for the 1986 Saab 9000 come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR.

Listed part numbers: ANCHOR 9586, DEA / MARMON RIDE CONTROL A7045 and WESTAR EM5489.