1991 Saab 9000 Automatic Transmission Parts

This table covers the Clutch Plate and Housing assemblies. Read more

2 Clutch Plate and Housing Assembly parts for the 1991 Saab 9000 come from PROFESSIONAL PARTS SWEDEN.

Part numbers include PROFESSIONAL PARTS SWEDEN 41341338S and PROFESSIONAL PARTS SWEDEN 41341812S.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies both parts for the 1991 Saab 9000.

The Friction Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RCP96138 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMZF05.

Part numbers include RAYBESTOS POWERTRAIN RCP96138 and RAYBESTOS POWERTRAIN STMZF05.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

8 Filter parts are listed for the 1991 Saab 9000, from ATP, PIONEER, VARIOUS MFR and 1 other brand. ATP B35 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR supplies 1 part: the catalog's value-priced group. A representative part number is VARIOUS MFR PT99774.

The Standard Replacement section lists 7 options from ATP, PIONEER and RAYBESTOS POWERTRAIN — built to original-equipment specification. ATP B35 is listed in this group.

Listed part numbers: ATP B35, VARIOUS MFR PT99774 and ATP B343, plus the other parts above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

One part is listed for the 1991 Saab 9000 — TECHPRO SB4050100.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pan Gasket parts are listed for the 1991 Saab 9000, from ATP and PIONEER.

This group includes ATP RG1 and PIONEER 749174.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 1991 Saab 9000 come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the O-rings and seals at this joint. Read more

This group shows a single part: BECK/ARNLEY 0523578.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Output Shaft Bearing parts for the 1991 Saab 9000 come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS RB6007 is listed in this group.

Standard Replacement: 2 parts, from BCA and NATIONAL. A representative part number is BCA NB107.

This group includes WJB / INMOTION PARTS RB6007, BCA NB107 and NATIONAL 107.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

4 Output Shaft Repair Sleeve parts are listed for the 1991 Saab 9000, from NATIONAL, SCHAEFFLER, SKF and 1 other brand.

Part numbers include NATIONAL 99177, SCHAEFFLER SR3475 and SKF 99146, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Output Shaft Seal parts are listed for the 1991 Saab 9000, from WJB / INMOTION PARTS, NATIONAL, ATP and 2 other brands. NATIONAL 1012N carries the "Popular" badge.

This group includes NATIONAL 1012N, WJB / INMOTION PARTS WS1012N and ATP NO14 and the remaining parts above.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts for the 1991 Saab 9000 come from 3 brands — PROFESSIONAL PARTS SWEDEN, PA CARGO and PIONEER. The "Popular" part is PA CARGO K85900A.

Listed part numbers: PA CARGO K85900A, PIONEER 750070 and PROFESSIONAL PARTS SWEDEN 21341005, plus the other parts above.

This table covers the sealing rings inside this assembly. Read more

One part is listed for the 1991 Saab 9000 — PROFESSIONAL PARTS SWEDEN 23343883.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 1991 Saab 9000 come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2111 and SKF 692263.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

5 Torque Converter Repair Sleeve parts for the 1991 Saab 9000 come from 5 brands — TIMKEN, BCA, NATIONAL and 2 other brands. The "Popular" part is TIMKEN KWK99187.

Listed part numbers: TIMKEN KWK99187, BCA NS99177 and NATIONAL 99177, plus the other parts above.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts for the 1991 Saab 9000 come from 4 brands — NATIONAL, SCHAEFFLER, TIMKEN and 1 other brand.

This group includes NATIONAL 710484, SCHAEFFLER SS2027 and TIMKEN 225110 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

21 Transmission Fluid parts are listed for the 1991 Saab 9000, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. VALVOLINE 798153 carries the "Popular" badge.

In the Dexron grade, VALVOLINE and MOBIL supply 4 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 798153.

In the Multi-Vehicle grade, VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand supply 10 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the Type III (H) grade, ACDELCO supplies 2 parts: grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109240.

In the Type T-4 (Type T-IV) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040093750.

In the ZF Fluid grade, PENTOSIN supplies 3 parts: grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058106.

This table covers the conditioners and additives used with this transmission fluid. Read more

9 Transmission Fluid Additive parts are listed for the 1991 Saab 9000, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT202, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Transmission Mount parts for the 1991 Saab 9000 come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

This group includes ANCHOR 9586, DEA / MARMON RIDE CONTROL A7045 and PIONEER 627045 and the remaining parts above.