2005 Toyota 4RUNNER Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2005 Toyota 4RUNNER. All of them fit every engine offered in the 2005 4RUNNER.

This group includes STANDARD MOTOR PRODUCTS S2541 and STANDARD MOTOR PRODUCTS S2539.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

14 ABS Wheel Speed Sensor Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, HOLSTEIN, ULTRA-POWER and 1 other brand. HOLSTEIN 2ABS3057 carries the "Popular" badge. All of them fit every engine offered in the 2005 4RUNNER.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S2817.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S2548.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S3209.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Blower Motor Control Module / Resistor Connector parts for the 2005 Toyota 4RUNNER come from 5 brands — FOUR SEASONS, GPD, HOLSTEIN and 2 other brands. The "Popular" part is FOUR SEASONS 37263. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include FOUR SEASONS 37263, GPD 1713423 and HOLSTEIN 2HAR0052, among others listed above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3142.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Camshaft Position Sensor Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, DORMAN and WELLS.

This group includes DORMAN 645744, STANDARD MOTOR PRODUCTS S2837 and STANDARD MOTOR PRODUCTS S2539 and the remaining parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Crankshaft Position Sensor Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2808, STANDARD MOTOR PRODUCTS S1716 and WELLS 1P1680.

This table covers the harness connectors at the Defroster Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Defroster Relay Connector parts for the 2005 Toyota 4RUNNER come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 4.0L V6 and the 4.7L V8.

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fog / Driving Lamp Connector parts are listed for the 2005 Toyota 4RUNNER, from ROSTRA and WELLS. All of them fit every engine offered in the 2005 4RUNNER.

Listed part numbers: ROSTRA 610004 and WELLS 6S1046.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injector Connector parts are listed for the 2005 Toyota 4RUNNER, from GB REMANUFACTURING and STANDARD MOTOR PRODUCTS. All of them fit every engine offered in the 2005 4RUNNER.

This group includes GB REMANUFACTURING 5188 and STANDARD MOTOR PRODUCTS S2328.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Pump / Circuit Opening Relay Connector parts for the 2005 Toyota 4RUNNER come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. Every part fits both the 4.0L V6 and the 4.7L V8.

This group includes STANDARD MOTOR PRODUCTS S1600, UNITED MOTOR PRODUCTS CON30 and WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S2873.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Tank Pressure Sensor Connector parts for the 2005 Toyota 4RUNNER come from 2 brands — ROSTRA and WELLS. Every part fits both the 4.0L V6 and the 4.7L V8.

Listed part numbers: ROSTRA 610604 and WELLS 1P2658.

This table covers the harness connectors at the Headlamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Headlamp Relay Connector parts for the 2005 Toyota 4RUNNER come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 4.0L V6 and the 4.7L V8.

This group includes STANDARD MOTOR PRODUCTS S1536 and UNITED MOTOR PRODUCTS CON28.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

4 Headlamp Wiring Harness / Connector parts for the 2005 Toyota 4RUNNER come from STANDARD MOTOR PRODUCTS. Every part fits both the 4.0L V6 and the 4.7L V8.

This group includes STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106 and the remaining parts above.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 HVAC Relay Connector parts for the 2005 Toyota 4RUNNER come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 4.0L V6 and the 4.7L V8.

Listed part numbers: STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON30.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Ignition Coil Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, DORMAN, FVP and 3 other brands. DORMAN 645940 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

This group includes DORMAN 645940, STANDARD MOTOR PRODUCTS S2527 and FVP UF230F and the remaining parts above.

This table covers the harness connectors at the Ignition Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Relay Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2005 4RUNNER.

This group includes STANDARD MOTOR PRODUCTS S1536 and UNITED MOTOR PRODUCTS CON28.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Knock / Detonation Sensor Connector parts are listed for the 2005 Toyota 4RUNNER, from DORMAN, STANDARD MOTOR PRODUCTS and WELLS. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include DORMAN 926769, STANDARD MOTOR PRODUCTS S2328 and WELLS 1P2624.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, ROSTRA, ULTRA-POWER and 2 other brands. STANDARD MOTOR PRODUCTS S1028 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS S1028, ROSTRA 610408 and ULTRA-POWER 2701088 and the remaining parts above.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Mass Air Flow (MAF) Sensor Connector parts for the 2005 Toyota 4RUNNER come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. 2 parts fit every engine; the other 1 is engine-specific.

This group includes STANDARD MOTOR PRODUCTS S935, STANDARD MOTOR PRODUCTS S1712 and UNITED MOTOR PRODUCTS CON192.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2538.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2005 Toyota 4RUNNER. All of them fit every engine offered in the 2005 4RUNNER.

This group includes STANDARD MOTOR PRODUCTS S3116 and STANDARD MOTOR PRODUCTS S1804.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2005 Toyota 4RUNNER. All of them fit every engine offered in the 2005 4RUNNER.

Listed part numbers: STANDARD MOTOR PRODUCTS S3143 and STANDARD MOTOR PRODUCTS S2537.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radio Connector parts for the 2005 Toyota 4RUNNER come from METRA. The "Popular" part is METRA 701761. Every part fits both the 4.0L V6 and the 4.7L V8.

This group includes METRA 701761, METRA 708113 and METRA 711761 and the remaining parts above.

This table covers the Repair harnesses. Read more

One part is listed for the 2005 Toyota 4RUNNER — ROSTRA 3500169.

This table covers the harness connectors at the Shift Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3266.

This table covers the harness connectors at the Speaker. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: METRA 728104.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Speed Sensor Connector parts for the 2005 Toyota 4RUNNER come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S2549.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Temperature Sender / Sensor Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 2 other brands. STANDARD MOTOR PRODUCTS S1923 carries the "Popular" badge. All of them fit every engine offered in the 2005 4RUNNER.

Listed part numbers: STANDARD MOTOR PRODUCTS S1923, WELLS 1P1562 and FOUR SEASONS 37288, plus the other parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S2817.

This table covers the harness connectors at the Trailer Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

CURT supplies both parts for the 2005 Toyota 4RUNNER. All of them fit every engine offered in the 2005 4RUNNER.

This group includes CURT 51362 and CURT 51363.

This table covers the Trailer Wire converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: CURT 55151.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

2 Transmission-Automatic Wiring Harness / Connector parts for the 2005 Toyota 4RUNNER come from 2 brands — DORMAN and ROSTRA. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include DORMAN 926383 and ROSTRA 3500163.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 2 are engine-specific.

This group includes STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Variable Valve Timing (VVT) Solenoid Connector parts are listed for the 2005 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS. All of them fit every engine offered in the 2005 4RUNNER.

Listed part numbers: STANDARD MOTOR PRODUCTS S1716, WALKER PRODUCTS 2701102 and WELLS 1P1680.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2005 Toyota 4RUNNER — STANDARD MOTOR PRODUCTS S1423.