2005 Toyota 4RUNNER Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 4WD Actuator parts are listed for the 2005 Toyota 4RUNNER, from DORMAN, AISIN, SKP and 2 other brands. DORMAN 600488 carries the "Popular" badge. 4 parts fit every engine; the other 1 is engine-specific.

This group includes DORMAN 600488, AISIN SAT017 and SKP SK600488 and the remaining parts above.

This table covers the Axle shafts. Read more

4 Axle Shaft parts are listed for the 2005 Toyota 4RUNNER, from DORMAN and USA STANDARD GEAR. All of them fit every engine offered in the 2005 4RUNNER.

In the Economy grade, DORMAN supplies 2 parts: the catalog's value-priced group. A representative part number is DORMAN 926141.

The Standard Replacement section lists 2 options from USA STANDARD GEAR — built to original-equipment specification. USA STANDARD GEAR ZAK630852 is listed in this group.

Part numbers include DORMAN 926141, DORMAN 926142 and USA STANDARD GEAR ZAK630852, among others listed above.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Axle Shaft Bearing parts are listed for the 2005 Toyota 4RUNNER, from NSK, SKF and USA STANDARD GEAR. All of them fit every engine offered in the 2005 4RUNNER.

Listed part numbers: NSK B432CG65, SKF BR4317 and USA STANDARD GEAR USA18194.

This table covers the Axle Shaft Lock / Snap rings. Read more

2 Axle Shaft Lock / Snap Ring parts are listed for the 2005 Toyota 4RUNNER, from SKF and USA STANDARD GEAR. All of them fit every engine offered in the 2005 4RUNNER.

Listed part numbers: SKF R271 and USA STANDARD GEAR USA33373.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

17 Axle Shaft Seal parts for the 2005 Toyota 4RUNNER come from 7 brands — SKF, TIMKEN, NATIONAL and 4 other brands. The "Popular" part is NATIONAL 710596. 16 parts fit every engine; the other 1 is engine-specific.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

8 CV Axle parts for the 2005 Toyota 4RUNNER come from 4 brands — TOP NOTCH, GSP, TRAKMOTIVE and 1 other brand. The "Popular" part is GSP NCV69170. Every part fits both the 4.0L V6 and the 4.7L V8.

The Economy section: 1 option from CARDONE. CARDONE 605235 is listed in this group.

In the Heavy Duty grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: rated for severe service. A representative part number is GSP NCV69170XD.

In the Specialty - For Lifted Vehicles grade, TOP NOTCH supplies 1 part: grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. A representative part number is TOP NOTCH TN18033XDP.

Standard Replacement: 3 parts, from GSP, TRAKMOTIVE and TOP NOTCH. A representative part number is GSP NCV69170.

Listed part numbers: GSP NCV69170, CARDONE 605235 and GSP NCV69170XD, plus the other parts above.

This table covers the CV Intermediate shafts. Read more

One part is listed for the 2005 Toyota 4RUNNER — TRAKMOTIVE TO3513.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2005 Toyota 4RUNNER come from 2 brands — BECK/ARNLEY and MEVOTECH. The "Popular" part is BECK/ARNLEY 1032957. Every part fits both the 4.0L V6 and the 4.7L V8.

This group includes BECK/ARNLEY 1032957, BECK/ARNLEY 1033133 and BECK/ARNLEY 1033125 and the remaining parts above.

This table covers the adjusters that set differential bearing preload. Read more

2 Differential Bearing Adjuster parts for the 2005 Toyota 4RUNNER come from USA STANDARD GEAR. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include USA STANDARD GEAR USA33365 and USA STANDARD GEAR USA33364.

This table covers the Differential Bearing Adjuster Nut Lock bolts. Read more

One part is listed for the 2005 Toyota 4RUNNER — USA STANDARD GEAR USA33366.

This table covers the carriers that hold the differential gears in the axle. Read more

3 Differential Carrier parts for the 2005 Toyota 4RUNNER come from USA STANDARD GEAR. Every part fits both the 4.0L V6 and the 4.7L V8.

Heavy Duty: 1 part, from USA STANDARD GEAR. A representative part number is USA STANDARD GEAR USA26051.

Standard Replacement: 2 parts, from USA STANDARD GEAR. A representative part number is USA STANDARD GEAR USA20135.

Listed part numbers: USA STANDARD GEAR USA26051, USA STANDARD GEAR USA20135 and USA STANDARD GEAR USA20110.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts for the 2005 Toyota 4RUNNER come from 3 brands — SCHAEFFLER, TIMKEN and SKF. The "Popular" part is TIMKEN SET45. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include TIMKEN SET45, TIMKEN 32010X and SCHAEFFLER KLM501349, among others listed above.

This table covers the Differential Carrier shims. Read more

One part is listed for the 2005 Toyota 4RUNNER — MOTIVE GEAR SK47.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: USA STANDARD GEAR USA23028.

This table covers the Differential Cross pins. Read more

One part is listed for the 2005 Toyota 4RUNNER — USA STANDARD GEAR USA33416.

This table covers the Differential Crush sleeves. Read more

6 Differential Crush Sleeve parts are listed for the 2005 Toyota 4RUNNER, from USA STANDARD GEAR and MOTIVE GEAR. USA STANDARD GEAR USA33118 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Part numbers include USA STANDARD GEAR USA33118, MOTIVE GEAR 3139 and MOTIVE GEAR 3132, among others listed above.

This table covers the Differential Fill drain plugs. Read more

This group shows a single part: USA STANDARD GEAR USA33464.

This table covers the Differential Gear Installation kits. Read more

USA STANDARD GEAR supplies the 3 Differential Gear Installation Kit parts for the 2005 Toyota 4RUNNER. All of them fit every engine offered in the 2005 4RUNNER.

Part numbers include USA STANDARD GEAR USA12076, USA STANDARD GEAR USA12087 and USA STANDARD GEAR USA12086.

This table covers the Differential housings. Read more

One part is listed for the 2005 Toyota 4RUNNER — USA STANDARD GEAR USA32095.

This table covers the slingers that keep gear oil off the pinion seal. Read more

2 Differential Oil Slinger parts for the 2005 Toyota 4RUNNER come from USA STANDARD GEAR. Every part fits both the 4.0L V6 and the 4.7L V8.

Listed part numbers: USA STANDARD GEAR USA33025 and USA STANDARD GEAR USA33026.

This table covers the bearings and races on the differential pinion. Read more

13 Differential Pinion Bearing / Race parts are listed for the 2005 Toyota 4RUNNER, from USA STANDARD GEAR, TIMKEN, BCA and 4 other brands. FAMOUS BRAND SHM88610 carries the "Popular" badge. All of them fit every engine offered in the 2005 4RUNNER.

Economy: 1 part, from FAMOUS BRAND. A representative part number is FAMOUS BRAND SHM88610.

The Standard Replacement section: 12 options from USA STANDARD GEAR, TIMKEN, BCA and 3 other brands. TIMKEN SET720 is listed in this group.

This table covers the baffles that control oil at the pinion bearings. Read more

One part is listed for the 2005 Toyota 4RUNNER — USA STANDARD GEAR USA33007.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

3 Differential Pinion Flange parts for the 2005 Toyota 4RUNNER come from 2 brands — USA STANDARD GEAR and DORMAN. Every part fits both the 4.0L V6 and the 4.7L V8.

Listed part numbers: DORMAN 697533, USA STANDARD GEAR USA41206 and USA STANDARD GEAR USA41212.

This table covers the Differential Pinion nuts. Read more

4 Differential Pinion Nut parts for the 2005 Toyota 4RUNNER come from 2 brands — USA STANDARD GEAR and MOTIVE GEAR. Every part fits both the 4.0L V6 and the 4.7L V8.

Listed part numbers: MOTIVE GEAR 9017722003, USA STANDARD GEAR USA33158 and USA STANDARD GEAR USA33156, plus the other parts above.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

This group shows a single part: USA STANDARD GEAR USA30220.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts for the 2005 Toyota 4RUNNER come from 6 brands — NATIONAL, SKF, BCA and 3 other brands. The "Popular" part is NATIONAL 710697. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include NATIONAL 710697, SKF 16114 and BCA NS710697, among others listed above.

This table covers the Differential Pinion shims. Read more

4 Differential Pinion Shim parts for the 2005 Toyota 4RUNNER come from 2 brands — USA STANDARD GEAR and MOTIVE GEAR. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include MOTIVE GEAR 1109, USA STANDARD GEAR USA55012 and USA STANDARD GEAR USA55064, among others listed above.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

29 Differential Rebuild Kit parts are listed for the 2005 Toyota 4RUNNER, from USA STANDARD GEAR, MOTIVE GEAR, TIMKEN and 1 other brand. MOTIVE GEAR R11RV6LMK carries the "Popular" badge. Grades run from Master Kit through Standard Kit; Master Kit is the most populated section, led by USA STANDARD GEAR, MOTIVE GEAR and RICHMOND.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

8 Differential Ring and Pinion parts for the 2005 Toyota 4RUNNER come from 4 brands — MOTIVE GEAR, USA STANDARD GEAR, DORMAN and 1 other brand. The "Popular" part is DORMAN 697005. 7 parts fit every engine; the other 1 is engine-specific.

The Economy section: 2 options from DORMAN and RICHMOND. DORMAN 697005 is listed in this group.

Standard Replacement: 6 parts, from MOTIVE GEAR and USA STANDARD GEAR. A representative part number is MOTIVE GEAR TV6.

Part numbers include DORMAN 697005, RICHMOND TL8L29 and MOTIVE GEAR TV6, among others listed above.

This table covers the Differential Ring Gear bolts. Read more

5 Differential Ring Gear Bolt parts for the 2005 Toyota 4RUNNER come from 2 brands — USA STANDARD GEAR and MOTIVE GEAR. The "Popular" part is USA STANDARD GEAR USA33061. Every part fits both the 4.0L V6 and the 4.7L V8.

This group includes USA STANDARD GEAR USA33061, MOTIVE GEAR RGB19 and MOTIVE GEAR TOY1308 and the remaining parts above.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2005 Toyota 4RUNNER — TIMKEN 710419.

This table covers the Differential Spider gears. Read more

This group shows a single part: USA STANDARD GEAR USA16063.

This table covers the spools that lock the differential side gears together. Read more

4 Differential Spool parts are listed for the 2005 Toyota 4RUNNER, from USA STANDARD GEAR and DANA. 3 parts fit every engine; the other 1 is engine-specific.

This group includes DANA 2023539, USA STANDARD GEAR ZPFSTV630 and USA STANDARD GEAR USA32051 and the remaining parts above.

This table covers the Differential washers. Read more

3 Differential Washer parts for the 2005 Toyota 4RUNNER come from USA STANDARD GEAR. Every part fits both the 4.0L V6 and the 4.7L V8.

Part numbers include USA STANDARD GEAR USA33393, USA STANDARD GEAR USA33168 and USA STANDARD GEAR USA33391.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

19 Drive Shaft parts are listed for the 2005 Toyota 4RUNNER, from DORMAN, CARDONE, SKP and 3 other brands. SKP SK938001 carries the "Popular" badge. 1 part fits every engine; the other 18 are engine-specific.