2013 Toyota 4RUNNER Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 4WD Actuator parts for the 2013 Toyota 4RUNNER come from 5 brands — STANDARD MOTOR PRODUCTS, DORMAN, AISIN and 2 other brands. The "Popular" part is DORMAN 600488.

Part numbers include DORMAN 600488, STANDARD MOTOR PRODUCTS TCA103 and AISIN SAT017, among others listed above.

This table covers the Axle shafts. Read more

This group shows a single part: DORMAN 926137.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Axle Shaft Bearing parts for the 2013 Toyota 4RUNNER come from 3 brands — NSK, SKF and USA STANDARD GEAR.

Part numbers include NSK B432CG65, SKF BR4317 and USA STANDARD GEAR USA18194.

This table covers the Axle Shaft Lock / Snap rings. Read more

This group shows a single part: SKF R271.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Axle Shaft Seal parts are listed for the 2013 Toyota 4RUNNER, from SKF, TIMKEN, NATIONAL and 4 other brands. NATIONAL 710596 carries the "Popular" badge.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

8 CV Axle parts are listed for the 2013 Toyota 4RUNNER, from TOP NOTCH, GSP, TRAKMOTIVE and 1 other brand. GSP NCV69170 carries the "Popular" badge.

In the Economy grade, CARDONE supplies 1 part: the catalog's value-priced group. A representative part number is CARDONE 605235.

The Heavy Duty section lists 3 options from GSP, TOP NOTCH and TRAKMOTIVE — rated for severe service. GSP NCV69170XD is listed in this group.

The Specialty - For Lifted Vehicles section lists 1 option from TOP NOTCH — grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. TOP NOTCH TN18033XDP is listed in this group.

The Standard Replacement section lists 3 options from GSP, TRAKMOTIVE and TOP NOTCH — built to original-equipment specification. GSP NCV69170 is listed in this group.

Listed part numbers: GSP NCV69170, CARDONE 605235 and GSP NCV69170XD, plus the other parts above.

This table covers the CV Intermediate shafts. Read more

This group shows a single part: TRAKMOTIVE TO3513.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts are listed for the 2013 Toyota 4RUNNER, from BECK/ARNLEY and MEVOTECH. BECK/ARNLEY 1033133 carries the "Popular" badge.

Part numbers include BECK/ARNLEY 1033133, BECK/ARNLEY 1033040 and BECK/ARNLEY 1033124, among others listed above.

This table covers the carriers that hold the differential gears in the axle. Read more

One part is listed for the 2013 Toyota 4RUNNER — USA STANDARD GEAR USA20135.

This table covers the bearings and races that support the differential carrier. Read more

One part is listed for the 2013 Toyota 4RUNNER — SKF BR5083.

This table covers the Differential Carrier shims. Read more

This group shows a single part: MOTIVE GEAR SK47.

This table covers the Differential Crush sleeves. Read more

6 Differential Crush Sleeve parts for the 2013 Toyota 4RUNNER come from 3 brands — USA STANDARD GEAR, MOTIVE GEAR and SKF. The "Popular" part is USA STANDARD GEAR USA33121.

Part numbers include USA STANDARD GEAR USA33121, USA STANDARD GEAR USA55053 and MOTIVE GEAR 3139, among others listed above.

This table covers the Differential Gear Installation kits. Read more

2 Differential Gear Installation Kit parts for the 2013 Toyota 4RUNNER come from USA STANDARD GEAR.

This group includes USA STANDARD GEAR USA12086 and USA STANDARD GEAR USA12091.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Differential Lock Actuator parts are listed for the 2013 Toyota 4RUNNER, from AISIN and SKP.

Listed part numbers: AISIN SAT020 and SKP SKSAT008.

This table covers the slingers that keep gear oil off the pinion seal. Read more

One part is listed for the 2013 Toyota 4RUNNER — USA STANDARD GEAR USA33026.

This table covers the bearings and races on the differential pinion. Read more

12 Differential Pinion Bearing / Race parts for the 2013 Toyota 4RUNNER come from 6 brands — SKF, TIMKEN, BCA and 3 other brands. The "Popular" part is SKF BR114.

This table covers the baffles that control oil at the pinion bearings. Read more

This group shows a single part: USA STANDARD GEAR USA33007.

This table covers the Differential Pinion nuts. Read more

One part is listed for the 2013 Toyota 4RUNNER — USA STANDARD GEAR USA33158.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Differential Pinion Seal parts are listed for the 2013 Toyota 4RUNNER, from NATIONAL, SKF, WJB / INMOTION PARTS and 4 other brands. NATIONAL 710697 carries the "Popular" badge.

This table covers the Differential Pinion shims. Read more

One part is listed for the 2013 Toyota 4RUNNER — MOTIVE GEAR 1109.

This table covers the Differential Ring Gear bolts. Read more

3 Differential Ring Gear Bolt parts are listed for the 2013 Toyota 4RUNNER, from USA STANDARD GEAR and MOTIVE GEAR.

Part numbers include MOTIVE GEAR RGB19, USA STANDARD GEAR USA33059 and USA STANDARD GEAR USA33580.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

3 Gear Oil parts are listed for the 2013 Toyota 4RUNNER, from VALVOLINE and IDEMITSU.

This group includes IDEMITSU 30305024750, VALVOLINE 915052 and VALVOLINE 915053.

This table covers the Gear Oil additives. Read more

One part is listed for the 2013 Toyota 4RUNNER — USA STANDARD GEAR USA15018.