2013 Toyota Matrix Drivetrain Parts

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

28 CV Axle parts for the 2013 Toyota Matrix come from 6 brands — TRAKMOTIVE, GSP, CARDONE and 3 other brands. The "Popular" part is APWI TO8367A. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 19 parts from TRAKMOTIVE, APWI, GSP and 2 other brands.

This table covers the brackets that mount the CV Axle Support Bearing. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2013 Toyota Matrix — DORMAN 926192.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

7 CV Joint Boot parts for the 2013 Toyota Matrix come from 3 brands — BECK/ARNLEY, MEVOTECH and ACKOJA. 1 part fits every engine; the other 6 are engine-specific.

This group includes ACKOJA A709837, BECK/ARNLEY 1033190 and BECK/ARNLEY 1032942 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

3 Differential Carrier Bearing / Race parts for the 2013 Toyota Matrix come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL. 2 parts fit every engine; the other 1 is engine-specific.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT32010X is listed in this group.

In the Standard Replacement grade, BCA and NATIONAL supply 2 parts: built to original-equipment specification. A representative part number is BCA NB32010X.

This group includes WJB / INMOTION PARTS WT32010X, BCA NB32010X and NATIONAL 32010X.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts for the 2013 Toyota Matrix come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include NATIONAL 99210 and WJB / INMOTION PARTS WS99210.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts for the 2013 Toyota Matrix come from 4 brands — WJB / INMOTION PARTS, NATIONAL, SCHAEFFLER and 1 other brand. The "Popular" part is NATIONAL 711053. 2 parts fit every engine; the other 3 are engine-specific.

Part numbers include NATIONAL 711053, SCHAEFFLER SS6645 and SKF 20776A, among others listed above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2013 Toyota Matrix, from DORMAN, GSP, TOP NOTCH and 2 other brands. DORMAN 946527 carries the "Popular" badge.

Part numbers include DORMAN 946527, GSP PS901666 and TOP NOTCH TN6955PS, among others listed above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Drive Shaft Center Support Bearing parts are listed for the 2013 Toyota Matrix, from BECK/ARNLEY and SKF.

Part numbers include BECK/ARNLEY 1018056 and SKF HB290110.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

14 Gear Oil parts for the 2013 Toyota Matrix come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 7 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10043 is listed in this group.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts for the 2013 Toyota Matrix come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section: 7 options from VALVOLINE and MOBIL. MOBIL 104361 is listed in this group.

The SAE 80W-90 section: 7 options from VALVOLINE and LUCAS OIL. LUCAS OIL 10043 is listed in this group.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Housing Extension Seal parts are listed for the 2013 Toyota Matrix, from BCA, NATIONAL and WJB / INMOTION PARTS. 1 part fits every engine; the other 2 are engine-specific.

This group includes BCA NS710319, NATIONAL 710319 and WJB / INMOTION PARTS WS710319.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts are listed for the 2013 Toyota Matrix, from SCHAEFFLER, SKF and WJB / INMOTION PARTS. 1 part fits every engine; the other 2 are engine-specific.

This group includes SCHAEFFLER SS6617, SKF 21680A and WJB / INMOTION PARTS WS21680A.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2013 Toyota Matrix — SKF BR3062.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

This group shows a single part: SKF 99147.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts for the 2013 Toyota Matrix come from 4 brands — NATIONAL, SKF, TIMKEN and 1 other brand. The "Popular" part is SKF 14958.

Listed part numbers: SKF 14958, NATIONAL 711075 and NATIONAL 710954, plus the other parts above.