2013 Toyota Matrix Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S1530.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1028.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 ABS Wheel Speed Sensor Connector parts are listed for the 2013 Toyota Matrix, from STANDARD MOTOR PRODUCTS, HOLSTEIN, BECK/ARNLEY and 1 other brand. HOLSTEIN 2ABS2487 carries the "Popular" badge. All of them fit every engine offered in the 2013 Matrix.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2815.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ambient Air Temperature Sensor Connector parts are listed for the 2013 Toyota Matrix, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2013 Matrix.

Listed part numbers: STANDARD MOTOR PRODUCTS S986 and WELLS 1P2653.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Blower Motor Control Module / Resistor Connector parts for the 2013 Toyota Matrix come from 5 brands — WELLS, DORMAN, FOUR SEASONS and 2 other brands. The "Popular" part is WELLS 1P2663. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include WELLS 1P2663, DORMAN 645729 and FOUR SEASONS 37258, among others listed above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3142.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Camshaft Position Sensor Connector parts are listed for the 2013 Toyota Matrix, from STANDARD MOTOR PRODUCTS, DORMAN and WELLS.

Listed part numbers: DORMAN 645744, STANDARD MOTOR PRODUCTS S2837 and STANDARD MOTOR PRODUCTS S2326, plus the other parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Crankshaft Position Sensor Connector parts are listed for the 2013 Toyota Matrix, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2808, STANDARD MOTOR PRODUCTS S2326 and WELLS 1P3838.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injector Connector parts are listed for the 2013 Toyota Matrix, from GB REMANUFACTURING and STANDARD MOTOR PRODUCTS. All of them fit every engine offered in the 2013 Matrix.

This group includes GB REMANUFACTURING 5188 and STANDARD MOTOR PRODUCTS S2328.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2873.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

4 Headlamp Wiring Harness / Connector parts for the 2013 Toyota Matrix come from STANDARD MOTOR PRODUCTS. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106, among others listed above.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ignition Coil Connector parts are listed for the 2013 Toyota Matrix, from STANDARD MOTOR PRODUCTS, DORMAN, FVP and 2 other brands. DORMAN 645940 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Part numbers include DORMAN 645940, STANDARD MOTOR PRODUCTS S2527 and FVP UF333F, among others listed above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2328.

This table covers the harness connectors at the License Plate Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3139.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Mass Air Flow (MAF) Sensor Connector parts for the 2013 Toyota Matrix come from 3 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER and WALKER PRODUCTS. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS S1712 and ULTRA-POWER 2701104, among others listed above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2538.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies the 4 Oxygen (O2) Sensor Connector parts for the 2013 Toyota Matrix. 2 parts fit every engine; the other 2 are engine-specific.

This group includes STANDARD MOTOR PRODUCTS S3171, STANDARD MOTOR PRODUCTS S3147 and STANDARD MOTOR PRODUCTS S3116 and the remaining parts above.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2537.

This table covers the harness connectors at the Radiator Fan Resistor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S3314.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radio Connector parts for the 2013 Toyota Matrix come from METRA. The "Popular" part is METRA AXBUCHT36V. Every part fits both the 1.8L L4 and the 2.4L L4.

Listed part numbers: METRA AXBUCHT36V, METRA AXSWCHT28 and METRA AXBUCHT1, plus the other parts above.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Speed Sensor Connector parts for the 2013 Toyota Matrix come from 2 brands — UNITED MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2549.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Temperature Sender / Sensor Connector parts are listed for the 2013 Toyota Matrix, from WELLS, FOUR SEASONS, ROSTRA and 2 other brands. WELLS 1P1562 carries the "Popular" badge. All of them fit every engine offered in the 2013 Matrix.

This group includes WELLS 1P1562, FOUR SEASONS 37288 and ROSTRA 610189 and the remaining parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2817.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Connector parts for the 2013 Toyota Matrix come from 2 brands — CURT and TEKONSHA. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include CURT 56035 and TEKONSHA 118460.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2013 Toyota Matrix, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 2 are engine-specific.

This group includes STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S2846.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Variable Valve Timing (VVT) Solenoid Connector parts are listed for the 2013 Toyota Matrix, from WELLS, ROSTRA, STANDARD MOTOR PRODUCTS and 1 other brand. 2 parts fit every engine; the other 3 are engine-specific.

This group includes ROSTRA 610158, STANDARD MOTOR PRODUCTS S1716 and WALKER PRODUCTS 2701102 and the remaining parts above.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Water Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: BECK/ARNLEY 1470113.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2013 Toyota Matrix — STANDARD MOTOR PRODUCTS S1423.