2013 Toyota Matrix Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2013 Toyota Matrix — SEALED POWER 1934M.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TOPLINE CBTO45.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts are listed for the 2013 Toyota Matrix, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Camshaft Seal parts are listed for the 2013 Toyota Matrix, from VICTOR REINZ, WJB / INMOTION PARTS, BCA and 4 other brands. VICTOR REINZ 815325600 carries the "Popular" badge. 1 part fits every engine; the other 6 are engine-specific.

This group includes VICTOR REINZ 815325600, WJB / INMOTION PARTS WS1987 and BCA NS1987 and the remaining parts above.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRTO44.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts for the 2013 Toyota Matrix come from 5 brands — MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Conversion / Lower Gasket Set parts for the 2013 Toyota Matrix come from 7 brands — APEX, ENGINETECH, FEL-PRO and 4 other brands. The "Popular" part is APEX ACS8081.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2013 Toyota Matrix come from 2 brands — CRANKSHAFT REBUILDERS and TOPLINE.

The Economy section lists 1 option from CRANKSHAFT REBUILDERS — the catalog's value-priced group. CRANKSHAFT REBUILDERS 32630 is listed in this group.

In the Standard Replacement grade, TOPLINE supplies 1 part: built to original-equipment specification. A representative part number is TOPLINE CSTO44.

Part numbers include CRANKSHAFT REBUILDERS 32630 and TOPLINE CSTO44.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

11 Crankshaft Main Bearing parts are listed for the 2013 Toyota Matrix, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1048 carries the "Popular" badge.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 2013 Toyota Matrix, from NATIONAL, WJB / INMOTION PARTS, SKF and 1 other brand. NATIONAL 99147 carries the "Popular" badge. 3 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: NATIONAL 99147, SKF 99354 and BCA NS99147, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

32 Crankshaft Seal parts are listed for the 2013 Toyota Matrix, from VICTOR REINZ, FEL-PRO, APEX and 7 other brands. AJUSA 15015300 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the cylinder heads that close the top of the block. Read more

CYLINDER HEAD EXPRESS supplies both parts for the 2013 Toyota Matrix.

Listed part numbers: CYLINDER HEAD EXPRESS CI1209B and CYLINDER HEAD EXPRESS CI1209L.

This table covers the bolts that clamp the cylinder head to the block. Read more

20 Cylinder Head Bolt parts for the 2013 Toyota Matrix come from 11 brands — APEX, ENGINETECH, FEL-PRO and 8 other brands. The "Popular" part is APEX AHB876.

This table covers the Cylinder Head Bolt washers. Read more

3 Cylinder Head Bolt Washer parts for the 2013 Toyota Matrix come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO ES72899, MAHLE / CLEVITE GS33354 and VICTOR REINZ 161001001.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

16 Cylinder Head Gasket parts for the 2013 Toyota Matrix come from 8 brands — APEX, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is APEX AHG881.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

20 Cylinder Head Gasket Set parts for the 2013 Toyota Matrix come from 11 brands — FEL-PRO, APEX, ENGINETECH and 8 other brands. The "Popular" part is APEX AHS8081.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302143.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies the 3 Engine Block Heater parts for the 2013 Toyota Matrix. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include KAT'S HEATERS 11411, KAT'S HEATERS 11813 and KAT'S HEATERS 28813.

This table covers the Engine covers. Read more

6 Engine Cover parts for the 2013 Toyota Matrix come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO TO1228155. Every part fits both the 1.8L L4 and the 2.4L L4.

Part numbers include TECHPRO TO1228155, TECHPRO TO1228151 and TECHPRO TO1228152, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Engine Kit Gasket Set parts for the 2013 Toyota Matrix come from 7 brands — ENGINETECH, ITM ENGINE COMPONENTS, AJUSA and 4 other brands. The "Popular" part is ENGINETECH TO24K5.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCTO24AP.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

9 Exhaust Valve parts are listed for the 2013 Toyota Matrix, from ENGINETECH, QUALCAST, SBI and 2 other brands. MELLING V3366 carries the "Popular" badge.

Listed part numbers: MELLING V3366, ENGINETECH EM4473 and ENGINETECH EM4391, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

12 Harmonic Balancer parts for the 2013 Toyota Matrix come from 6 brands — SKP, ULTRA-POWER, ATP and 3 other brands. The "Popular" part is SKP SK594404.

The Economy section: 2 options from SKP. SKP SK594404 is listed in this group.

Standard Replacement: 8 parts, from ULTRA-POWER, ATP, DAYCO and 1 other brand. A representative part number is ULTRA-POWER 594404.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2013 Toyota Matrix — ARP 1032801.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

4 Intake Manifold parts are listed for the 2013 Toyota Matrix, from ACKOJA, DORMAN and LARES.

Listed part numbers: ACKOJA A700294, ACKOJA A700006 and DORMAN 615565, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Intake Manifold Gasket parts for the 2013 Toyota Matrix come from 7 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 4 other brands. The "Popular" part is FEL-PRO MS97144.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Toyota Matrix — ELRING 299150.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Intake Valve parts are listed for the 2013 Toyota Matrix, from ENGINETECH, QUALCAST, SBI and 4 other brands. MELLING V3365 carries the "Popular" badge.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

29 Motor Mount parts are listed for the 2013 Toyota Matrix, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 4 other brands. SKP SKM9391 carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 25 parts.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2013 Toyota Matrix.

Listed part numbers: ANCHOR 300679 and ANCHOR 300680.