2013 Toyota Sienna Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Axle Shaft Seal parts are listed for the 2013 Toyota Sienna, from NATIONAL, TIMKEN and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 711097, TIMKEN SL260467 and WJB / INMOTION PARTS WS711097.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

8 CV Axle parts are listed for the 2013 Toyota Sienna, from TRAKMOTIVE, GSP, TOP NOTCH and 1 other brand. GSP NCV69055 carries the "Popular" badge.

Listed part numbers: GSP NCV69055, TOP NOTCH TN18127 and APWI TO8471A, plus the other parts above.

This table covers the brackets that mount the CV Axle Support Bearing. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DORMAN 926195.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

MEVOTECH supplies both parts for the 2013 Toyota Sienna.

This group includes MEVOTECH DX859 and MEVOTECH DX820.

This table covers the bearings and races that support the differential carrier. Read more

4 Differential Carrier Bearing / Race parts are listed for the 2013 Toyota Sienna, from WJB / INMOTION PARTS, BCA, GSP and 1 other brand.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WT30210.

The Standard Replacement section lists 3 options from BCA, GSP and NATIONAL — built to original-equipment specification. BCA NB30210 is listed in this group.

Listed part numbers: WJB / INMOTION PARTS WT30210, BCA NB30210 and GSP 691210, plus the other parts above.

This table covers the bearings and races on the differential pinion. Read more

2 Differential Pinion Bearing / Race parts for the 2013 Toyota Sienna come from SKF.

This group includes SKF BR3568 and SKF BR3062.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts are listed for the 2013 Toyota Sienna, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99210 and WJB / INMOTION PARTS WS99210.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Differential Pinion Seal parts are listed for the 2013 Toyota Sienna, from SCHAEFFLER, NATIONAL, SKF and 2 other brands. SCHAEFFLER SS3130 carries the "Popular" badge.

This group includes SCHAEFFLER SS3130, NATIONAL 711098 and SKF 21268 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

3 Drive Shaft parts for the 2013 Toyota Sienna come from 3 brands — CARDONE, SKP and TRAKMOTIVE.

This group includes CARDONE 655030, SKP SK655030 and TRAKMOTIVE TOP414.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Drive Shaft Center Support Bearing parts for the 2013 Toyota Sienna come from 10 brands — DEA / MARMON RIDE CONTROL, WESTAR, WJB / INMOTION PARTS and 7 other brands. The "Popular" part is ANCHOR 6082.

The Economy section: 3 options from DEA / MARMON RIDE CONTROL, WESTAR and WJB / INMOTION PARTS. DEA / MARMON RIDE CONTROL A6090 is listed in this group.

Standard Replacement: 7 parts, from ANCHOR, SKF, BCA and 4 other brands. A representative part number is ANCHOR 6082.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Housing Extension Seal parts for the 2013 Toyota Sienna come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS710319, NATIONAL 710319 and WJB / INMOTION PARTS WS710319.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts for the 2013 Toyota Sienna come from 3 brands — SCHAEFFLER, SKF and WJB / INMOTION PARTS.

Listed part numbers: SCHAEFFLER SS6617, SKF 21680A and WJB / INMOTION PARTS WS21680A.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: SKF BR3062.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

One part is listed for the 2013 Toyota Sienna — SKF 99147.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts are listed for the 2013 Toyota Sienna, from NATIONAL, SKF, TIMKEN and 1 other brand. SKF 14958 carries the "Popular" badge.

This group includes SKF 14958, NATIONAL 711075 and NATIONAL 710954 and the remaining parts above.