This page lists 31 steering parts for the 2016 Toyota Venza, across 4 part types, covering both the 2.7L L4 and the 3.5L V6. Every part shows its brand, manufacturer part number and fitment notes.
The steering system on the 2016 Toyota Venza connects driver to road through the rack, pump, tie rods, and column components. The largest groups are Tie Rod End (22 parts), Rack and Pinion Bellow (5 parts) and Steering Shaft (3 parts). The other 1 part type covers the remaining 1 part.
The 2016 Toyota Venza was sold with both the 2.7L L4 and the 3.5L V6. All 31 parts on this page fit every engine.
10 brands supply steering parts for the 2016 Toyota Venza, led by MEVOTECH (10 parts), DORMAN (5 parts) and DELPHI (3 parts), plus 7 more brands. Quality grades include Economy, Daily Driver and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2016 Toyota Venza. 6 parts have it, including MEVOTECH MS86097 (Rack and Pinion Bellow) and MEVOTECH MS86634 (Tie Rod End). Each part number opens a page with every vehicle that part fits.
Rack and Pinion
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AAE Fits: all 2016 Venza engines | 4630N | 🇨🇦 CA | Electronic PS with MAN. Rack | View on Amazon |
This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.
One part is listed for the 2016 Toyota Venza — AAE 4630N.
Rack and Pinion Bellow
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular Fits: all 2016 Venza engines | MS86097 | 🇨🇦 CA | SupremeLength: 194.06 mm | View on Amazon |
| DELPHI Fits: all 2016 Venza engines | TBR5017 | 🇨🇦 CA | Front168mm Length | View on Amazon |
| DORMAN Fits: all 2016 Venza engines | 541531 | 🇨🇦 CA | Fits Right | View on Amazon |
| FVP Fits: all 2016 Venza engines | RPK75155 | 🇨🇦 CA | Fits Right | View on Amazon |
| MEVOTECH Fits: all 2016 Venza engines | GS86097 | 🇨🇦 CA | Original GradeLength: 194.06 mm | View on Amazon |
This table covers the rubber boots that seal the inner tie-rod joints on the rack.
5 Rack and Pinion Bellow parts for the 2016 Toyota Venza come from 4 brands — MEVOTECH, DELPHI, DORMAN and 1 other brand. The "Popular" part is MEVOTECH MS86097. Every part fits both the 2.7L L4 and the 3.5L V6.
Part numbers include MEVOTECH MS86097, DELPHI TBR5017 and DORMAN 541531, among others listed above.
Steering Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2016 Venza engines | 425601 | 🇨🇦 CA | 19.6 In. Length | View on Amazon |
| LARES Fits: all 2016 Venza engines | 600 | 🇨🇦 CA | Intermediate | View on Amazon |
| SKP Fits: all 2016 Venza engines | SK425601 | 🇨🇦 CA | Intermediate | View on Amazon |
This table covers the Steering shafts.
3 Steering Shaft parts are listed for the 2016 Toyota Venza, from DORMAN, LARES and SKP. All of them fit every engine offered in the 2016 Venza.
Part numbers include DORMAN 425601, LARES 600 and SKP SK425601.
Tie Rod End
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular Fits: all 2016 Venza engines | MS86634 | 🇨🇦 CA | SupremeGreaseable | View on Amazon |
| MOOG Popular Fits: all 2016 Venza engines | EV801472 | 🇨🇦 CA | Front Inner | View on Amazon |
| 555 Fits: all 2016 Venza engines | SET391R | 🇨🇦 CA | Sankei 555 | View on Amazon |
| DELPHI Fits: all 2016 Venza engines | TA5400 | 🇨🇦 CA | Left Outer | View on Amazon |
| DELPHI Fits: all 2016 Venza engines | TA5401 | 🇨🇦 CA | Right Outer | View on Amazon |
| MEVOTECH Fits: all 2016 Venza engines | MS86633 | 🇨🇦 CA | SupremeGreaseable | View on Amazon |
| MEVOTECH Fits: all 2016 Venza engines | MS86744 | 🇨🇦 CA | SupremeIncludes Hardware | View on Amazon |
| MOOG Fits: all 2016 Venza engines | ES800533 | 🇨🇦 CA | Front Left Outer | View on Amazon |
| MOOG Fits: all 2016 Venza engines | ES800534 | 🇨🇦 CA | Front Right Outer | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2016 Venza engines | 543680 | 🇨🇦 CA | Front Inner | View on Amazon |
| DORMAN Fits: all 2016 Venza engines | 544445 | 🇨🇦 CA | Front Left Outer | View on Amazon |
| DORMAN Fits: all 2016 Venza engines | 544446 | 🇨🇦 CA | Front Right Outer | View on Amazon |
| FVP Fits: all 2016 Venza engines | TO74191 | 🇨🇦 CA | Front Left Outer | View on Amazon |
| FVP Fits: all 2016 Venza engines | TO74192 | 🇨🇦 CA | Front Right Outer | View on Amazon |
| MEVOTECH Fits: all 2016 Venza engines | GS86633 | 🇨🇦 CA | Original Grade | View on Amazon |
| MEVOTECH Fits: all 2016 Venza engines | GS86634 | 🇨🇦 CA | Original Grade | View on Amazon |
| MEVOTECH Fits: all 2016 Venza engines | GS86744 | 🇨🇦 CA | Original Grade | View on Amazon |
| QUICK STEER Fits: all 2016 Venza engines | EV801472 | 🇨🇦 CA | Front Inner | View on Amazon |
| QUICK STEER Fits: all 2016 Venza engines | ES800533 | 🇨🇦 CA | Front Left Outer | View on Amazon |
| QUICK STEER Fits: all 2016 Venza engines | ES800534 | 🇨🇦 CA | Front Right Outer | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Popular Fits: all 2016 Venza engines | TXMS86634 | 🇨🇦 CA | Terrain ToughTTX | View on Amazon |
| MEVOTECH Popular Fits: all 2016 Venza engines | TXMS86633 | 🇨🇦 CA | Terrain ToughTTX | View on Amazon |
This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.
22 Tie Rod End parts for the 2016 Toyota Venza come from 7 brands — MEVOTECH, MOOG, DORMAN and 4 other brands. The "Popular" part is MEVOTECH MS86634. Every part fits both the 2.7L L4 and the 3.5L V6.
In the Daily Driver grade, MEVOTECH, MOOG, DELPHI and 1 other brand supply 9 parts: grouped for everyday commuting duty. A representative part number is MEVOTECH MS86634.
The Economy section lists 11 options from DORMAN, MEVOTECH, QUICK STEER and 1 other brand — the catalog's value-priced group. DORMAN 543680 is listed in this group.
In the Premium grade, MEVOTECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MEVOTECH TXMS86634.
Buying Steering Parts for a 2016 Toyota Venza
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- You do not need to pick an engine: every steering part on this page fits both the 2.7L L4 and the 3.5L V6.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod End and Rack and Pinion Bellow .
Frequently Asked Questions
How many steering parts fit the 2016 Toyota Venza?
Our catalog currently lists 31 steering parts for the 2016 Toyota Venza across 4 subcategories and 10 brands, covering both the 2.7L L4 and the 3.5L V6. Each part is matched to the engine(s) it fits.
Do steering parts differ between 2016 Toyota Venza engines?
No. On this page every steering part fits both the 2.7L L4 and the 3.5L V6. You do not need to pick an engine to choose the right row — use the notes for position and trim.
What are the signs of steering problems on a 2016 Toyota Venza?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Toyota Venza was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2016 Toyota Venza?
Every part on this page already fits both the 2.7L L4 and the 3.5L V6. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2016 Toyota Venza
Steering Parts for Other Toyota Venza Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.