2016 Toyota Venza Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRTO49.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts for the 2016 Toyota Venza come from 4 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BB1035.

This group includes ENGINETECH BB1035, KING ENGINE BEARINGS CR6873SM and KING ENGINE BEARINGS CR6873MC and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts for the 2016 Toyota Venza come from 4 brands — AJUSA, FEL-PRO, TOPLINE and 1 other brand.

This group includes AJUSA 54185000, AJUSA 54157300 and FEL-PRO CS26562 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts are listed for the 2016 Toyota Venza, from TOPLINE, MAHLE / CLEVITE and ITM ENGINE COMPONENTS.

Listed part numbers: ITM ENGINE COMPONENTS 7M9700, MAHLE / CLEVITE MS2376A and MAHLE / CLEVITE MS2357A, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2016 Toyota Venza, from WJB / INMOTION PARTS, BCA and NATIONAL. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

27 Crankshaft Seal parts are listed for the 2016 Toyota Venza, from FEL-PRO, AJUSA, ELRING and 6 other brands. FEL-PRO BS40741 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts for the 2016 Toyota Venza come from 6 brands — FEL-PRO, TOPLINE, VICTOR REINZ and 3 other brands. The "Popular" part is FEL-PRO ES722492.

Listed part numbers: FEL-PRO ES722492, AJUSA 81042100 and FEL-PRO ES72249, plus the other parts above.

This table covers the Cylinder Head Bolt washers. Read more

This group shows a single part: FEL-PRO ES72899.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts for the 2016 Toyota Venza come from 6 brands — FEL-PRO, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is FEL-PRO 26562PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Cylinder Head Gasket Set parts for the 2016 Toyota Venza come from 6 brands — FEL-PRO, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. The "Popular" part is FEL-PRO HS26562PT.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2016 Toyota Venza. All of them fit every engine offered in the 2016 Venza.

Listed part numbers: KAT'S HEATERS 11813 and KAT'S HEATERS 28813.

This table covers the Engine covers. Read more

4 Engine Cover parts for the 2016 Toyota Venza come from 2 brands — TECHPRO and VARIOUS MFR. Every part fits both the 2.7L L4 and the 3.5L V6.

Listed part numbers: TECHPRO TO1228166 and TECHPRO TO1228165, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts for the 2016 Toyota Venza come from 3 brands — AJUSA, TOPLINE and ITM ENGINE COMPONENTS.

This group includes AJUSA 50323500, AJUSA 50319400 and ITM ENGINE COMPONENTS 0901635 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TOPLINE supplies both parts for the 2016 Toyota Venza.

This group includes TOPLINE EVTO56 and TOPLINE EVTO49.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

8 Harmonic Balancer parts for the 2016 Toyota Venza come from 4 brands — SKP, ATP, DORMAN and 1 other brand.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SK594403 is listed in this group.

In the Standard Replacement grade, ATP, DORMAN and PIONEER supply 6 parts: built to original-equipment specification. A representative part number is ATP 102346.

This group includes SKP SK594403, SKP SK594304 and ATP 102346 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2016 Toyota Venza — LARES 34060.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts for the 2016 Toyota Venza come from 5 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS96790.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS IMRC15.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts are listed for the 2016 Toyota Venza, from AJUSA, FEL-PRO and VICTOR REINZ.

Listed part numbers: AJUSA 01182400, FEL-PRO MS96786 and VICTOR REINZ 114284401.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

TOPLINE supplies both parts for the 2016 Toyota Venza.

This group includes TOPLINE IVTO56 and TOPLINE IVTO49.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

24 Motor Mount parts are listed for the 2016 Toyota Venza, from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. ANCHOR 9590 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9884.

The Standard Replacement section: 12 options from WESTAR, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 9590 is listed in this group.

11 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2016 Toyota Venza.

Listed part numbers: ANCHOR 300413 and ANCHOR 300228.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

25 Oil parts are listed for the 2016 Toyota Venza, from MOBIL, VALVOLINE and PENTOSIN. MOBIL 124184 carries the "Popular" badge. All of them fit every engine offered in the 2016 Venza.

In the Full Synthetic grade, MOBIL, PENTOSIN and VALVOLINE supply 14 parts: full-synthetic oils. A representative part number is MOBIL 124184.

The High Mileage (>75,000 Miles) section lists 10 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 125202 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 1 part: synthetic-blend oils. A representative part number is MOBIL 124408.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01126100.

This table covers the Oil Cooler Hose pipes. Read more

One part is listed for the 2016 Toyota Venza — STANDARD MOTOR PRODUCTS EOC001.

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Oil Cooler Line parts are listed for the 2016 Toyota Venza, from AUTOTECNICA, DORMAN, SKP and 1 other brand.

Listed part numbers: AUTOTECNICA TY1418804, DORMAN 625022 and SKP SK625022, plus the other parts above.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01184100.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2016 Toyota Venza — DORMAN 917391.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts are listed for the 2016 Toyota Venza, from DORMAN, ELRING, ACKOJA and 2 other brands. DORMAN 090038 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.

Listed part numbers: DORMAN 090038, DORMAN 090049 and ACKOJA A700114, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2016 Toyota Venza come from 5 brands — AJUSA, ELRING, FEL-PRO and 2 other brands. 3 parts fit every engine; the other 2 are engine-specific.

Part numbers include AJUSA 22005800, ELRING 473500 and FEL-PRO 70822, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2016 Toyota Venza, from DORMAN, CALORSTAT, GATES and 2 other brands. DORMAN 84111 carries the "Popular" badge. All of them fit every engine offered in the 2016 Venza.

Part numbers include DORMAN 84111, CALORSTAT OC2312 and GATES 31285, among others listed above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts are listed for the 2016 Toyota Venza, from VARIOUS MFR, WIX, PRO-TEC and 7 other brands. PRO-TEC PXL57047 carries the "Popular" badge. 11 parts fit every engine; the other 1 is engine-specific.

Economy: 3 parts, from PRO-TEC, FVP and VARIOUS MFR. A representative part number is PRO-TEC PXL57047.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57047XP.

The Standard Replacement section: 7 options from WIX, ACDELCO, FEL-PRO and 4 other brands. WIX 57047 is listed in this group.

This table covers the Oil Filter covers. Read more

5 Oil Filter Cover parts for the 2016 Toyota Venza come from 4 brands — MOTORAD, DORMAN, ACKOJA and 1 other brand. The "Popular" part is DORMAN 917016. 4 parts fit every engine; the other 1 is engine-specific.

This group includes DORMAN 917016, ACKOJA A700771 and AUTOTECNICA TY1420831 and the remaining parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

11 Oil Pan parts for the 2016 Toyota Venza come from 6 brands — AUTOTECNICA, DORMAN, SKP and 3 other brands. The "Popular" part is AUTOTECNICA TY1414689.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2016 Toyota Venza, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE.

Part numbers include FEL-PRO OS30842, FEL-PRO OS30770 and MAHLE / CLEVITE OS32456, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

4 Oil Pump parts are listed for the 2016 Toyota Venza, from TOPLINE, ACKOJA and ITM ENGINE COMPONENTS.

Part numbers include ACKOJA A701056, ITM ENGINE COMPONENTS 85000 and TOPLINE OPTO56, among others listed above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2016 Toyota Venza come from TOPLINE.

This group includes TOPLINE PATO57 and TOPLINE PATO49.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2016 Toyota Venza — TOPLINE PBD34.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2016 Toyota Venza come from TOPLINE.

This group includes TOPLINE RSTO56 and TOPLINE RSTO49.

This table covers the Thrust washers. Read more

4 Thrust Washer parts are listed for the 2016 Toyota Venza, from MAHLE / CLEVITE, ITM ENGINE COMPONENTS and KING ENGINE BEARINGS.

Part numbers include ITM ENGINE COMPONENTS 1T9700, KING ENGINE BEARINGS TW1036AM and MAHLE / CLEVITE TW742S, among others listed above.

This table covers the timing chains that keep the cams in time with the crank. Read more

8 Timing Chain parts for the 2016 Toyota Venza come from 4 brands — AISIN, CLOYES, MELLING and 1 other brand. The "Popular" part is MELLING 1026.

Part numbers include MELLING 1026, AISIN ETCT003 and AISIN ETCT007, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

11 Timing Chain & Component Kit parts are listed for the 2016 Toyota Venza, from CLOYES, GATES, MELLING and 2 other brands. CLOYES 94313S carries the "Popular" badge.

Economy: 3 parts, from GATES and ITM ENGINE COMPONENTS. A representative part number is GATES CHK148.

The Standard Replacement section: 8 options from CLOYES, MELLING and TOPLINE. CLOYES 94313S is listed in this group.

This table covers the guides and dampers that keep the timing chain on its path. Read more

12 Timing Chain Guide / Damper parts for the 2016 Toyota Venza come from 2 brands — CLOYES and FVP. The "Popular" part is CLOYES 95798.