2020 Toyota Camry Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2020 Toyota Camry, from TOPLINE and ENGINETECH.

This group includes ENGINETECH BB1035, TOPLINE RBTO59 and TOPLINE RBTO49.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2020 Toyota Camry, from AJUSA, TOPLINE and ELRING.

This group includes AJUSA 54307700, AJUSA 54306700 and ELRING 106910 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2020 Toyota Camry come from 2 brands — TOPLINE and MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE MS2357A, TOPLINE TWTO59 and TOPLINE MBTO59, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts for the 2020 Toyota Camry come from 10 brands — ELRING, AJUSA, VICTOR REINZ and 7 other brands. The "Popular" part is AJUSA 15121900.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts are listed for the 2020 Toyota Camry, from VICTOR REINZ, TOPLINE, FEL-PRO and 2 other brands. FEL-PRO ES72249 carries the "Popular" badge.

Part numbers include FEL-PRO ES72249, AJUSA 81078800 and APEX AHB871, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2020 Toyota Camry, from AJUSA, APEX, FEL-PRO and 3 other brands. APEX AHG891 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts are listed for the 2020 Toyota Camry, from MAHLE / CLEVITE, AJUSA, TOPLINE and 2 other brands.

Part numbers include AJUSA 52570500, AJUSA 52593000 and ELRING 106880, among others listed above.

This table covers the Engine covers. Read more

9 Engine Cover parts are listed for the 2020 Toyota Camry, from TECHPRO and VARIOUS MFR. TECHPRO TO1228292 carries the "Popular" badge. 3 parts fit every engine; the other 6 are engine-specific.

Part numbers include TECHPRO TO1228292, TECHPRO TO1228285 and TECHPRO TO1228234, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Engine Kit Gasket Set parts are listed for the 2020 Toyota Camry, from AJUSA, TOPLINE, ELRING and 1 other brand.

Part numbers include AJUSA 50522800, AJUSA 50542300 and ELRING 085130, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2020 Toyota Camry come from 3 brands — MELLING, TOPLINE and SBI.

Part numbers include MELLING V5831, MELLING V3087 and SBI 13087, among others listed above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2020 Toyota Camry — STANDARD MOTOR PRODUCTS GDF724.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts are listed for the 2020 Toyota Camry, from ATP, PIONEER and ACKOJA.

This group includes ACKOJA A700993, ATP 102180 and ATP 102224 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: ACKOJA A700257.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Manifold Gasket parts are listed for the 2020 Toyota Camry, from MAHLE / CLEVITE, AJUSA, ELRING and 3 other brands. BECK/ARNLEY 0376251 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 2020 Toyota Camry come from 4 brands — AJUSA, ELRING, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 01645000, ELRING B54040 and MAHLE / CLEVITE MS20627, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2020 Toyota Camry come from 4 brands — MELLING, QUALCAST, TOPLINE and 1 other brand.

Part numbers include MELLING V5832, MELLING V3086 and QUALCAST 1030532, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

33 Motor Mount parts for the 2020 Toyota Camry come from 5 brands — ANCHOR, PIONEER, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 10140. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 20 parts.

This table covers the Motor Mount kits. Read more

5 Motor Mount Kit parts for the 2020 Toyota Camry come from 2 brands — ANCHOR and SKP.

This group includes ANCHOR 300919, ANCHOR 300918 and ANCHOR 300833 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts for the 2020 Toyota Camry come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 20328. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 30 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS OCK108.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Toyota Camry — ELRING 918130.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Toyota Camry — BECK/ARNLEY 0396661.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2020 Toyota Camry come from 5 brands — DORMAN, ELRING, BECK/ARNLEY and 2 other brands. The "Popular" part is BECK/ARNLEY 0160116. 3 parts fit every engine; the other 4 are engine-specific.

Listed part numbers: BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Oil Drain Plug Gasket parts are listed for the 2020 Toyota Camry, from DORMAN, FEL-PRO, ULTRA-POWER and 4 other brands. DORMAN 095156 carries the "Popular" badge. 2 parts fit every engine; the other 5 are engine-specific.

Part numbers include DORMAN 095156 and FEL-PRO 70822, among others listed above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2020 Toyota Camry come from 3 brands — CALORSTAT, GATES and MOTORAD. Every part fits all 3 engine options (2.5L L4, 2.5L L4 ELECTRIC/GAS and 3.5L V6).

This group includes CALORSTAT OC2312, GATES 31285 and MOTORAD MO155.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Toyota Camry — AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

38 Oil Filter parts for the 2020 Toyota Camry come from 17 brands — VARIOUS MFR, WIX, PRO-TEC and 14 other brands. The "Popular" part is PRO-TEC PXL57047. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by WIX, ACDELCO, BECK/ARNLEY and 8 other brands.

This table covers the Oil Filter covers. Read more

6 Oil Filter Cover parts are listed for the 2020 Toyota Camry, from MOTORAD, DORMAN, SKP and 2 other brands. DORMAN 917016 carries the "Popular" badge.

This group includes DORMAN 917016, SKP SK917016 and AUTOTECNICA TY1420831 and the remaining parts above.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Oil Level Sensor parts for the 2020 Toyota Camry come from 2 brands — STANDARD MOTOR PRODUCTS and VEMO.

Part numbers include STANDARD MOTOR PRODUCTS FLS359, STANDARD MOTOR PRODUCTS FLS360 and VEMO V70720463.