2018 Toyota Camry Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 2018 Toyota Camry come from 2 brands — TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BB1035, TOPLINE RBTO59 and TOPLINE RBTO49.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2018 Toyota Camry come from 3 brands — AJUSA, TOPLINE and ELRING.

Listed part numbers: AJUSA 54307700, AJUSA 54306700 and ELRING 106910, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2018 Toyota Camry, from TOPLINE and MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE MS2357A, TOPLINE TWTO59 and TOPLINE MBTO59, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2018 Toyota Camry, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts are listed for the 2018 Toyota Camry, from ELRING, AJUSA, VICTOR REINZ and 6 other brands. AJUSA 15121900 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

8 Cylinder Head Bolt parts for the 2018 Toyota Camry come from 5 brands — VICTOR REINZ, TOPLINE, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO ES72249.

Part numbers include FEL-PRO ES72249, AJUSA 81078800 and APEX AHB871, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Cylinder Head Gasket parts for the 2018 Toyota Camry come from 5 brands — APEX, ELRING, AJUSA and 2 other brands. The "Popular" part is APEX AHG891.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Cylinder Head Gasket Set parts for the 2018 Toyota Camry come from 5 brands — ELRING, MAHLE / CLEVITE, AJUSA and 2 other brands.

This table covers the Engine covers. Read more

9 Engine Cover parts for the 2018 Toyota Camry come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO TO1228292. 3 parts fit every engine; the other 6 are engine-specific.

This group includes TECHPRO TO1228292, TECHPRO TO1228285 and TECHPRO TO1228234 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Engine Kit Gasket Set parts for the 2018 Toyota Camry come from 4 brands — ELRING, AJUSA, TOPLINE and 1 other brand.

Listed part numbers: AJUSA 50522800, AJUSA 50542300 and ELRING 085130, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 2018 Toyota Camry, from MELLING, TOPLINE and SBI.

This group includes MELLING V5831, MELLING V3087 and SBI 13087 and the remaining parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2018 Toyota Camry come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS GDF504 and WELLS 5T5023.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

11 Harmonic Balancer parts for the 2018 Toyota Camry come from 4 brands — ATP, PIONEER, SKP and 1 other brand. The "Popular" part is SKP SK594403.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594403 is listed in this group.

In the Standard Replacement grade, ATP and PIONEER supply 2 parts: built to original-equipment specification. A representative part number is ATP 102346.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2018 Toyota Camry — ACKOJA A700257.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Intake Manifold Gasket parts for the 2018 Toyota Camry come from 6 brands — ELRING, MAHLE / CLEVITE, AJUSA and 3 other brands. The "Popular" part is BECK/ARNLEY 0376251.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2018 Toyota Camry, from AJUSA, ELRING, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 01645000, ELRING B54040 and MAHLE / CLEVITE MS20627, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts are listed for the 2018 Toyota Camry, from MELLING, QUALCAST, TOPLINE and 1 other brand.

Part numbers include MELLING V5832, MELLING V3086 and QUALCAST 1030532, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

25 Motor Mount parts are listed for the 2018 Toyota Camry, from ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 10140 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM10134.

The Standard Replacement section: 13 options from ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 10140 is listed in this group.

11 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts are listed for the 2018 Toyota Camry, from ANCHOR and SKP.

This group includes ANCHOR 300919, ANCHOR 300833 and ANCHOR 300825 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts are listed for the 2018 Toyota Camry, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 20328 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 30 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2018 Toyota Camry — STANDARD MOTOR PRODUCTS OCK108.

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Oil Cooler Line parts are listed for the 2018 Toyota Camry, from DORMAN and SUNSONG.

This group includes DORMAN 625519 and SUNSONG 5801461.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 918130.

This table covers the Oil Dipstick tubes. Read more

DORMAN supplies both parts for the 2018 Toyota Camry.

Part numbers include DORMAN 921135 and DORMAN 917391.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: BECK/ARNLEY 0396661.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts are listed for the 2018 Toyota Camry, from DORMAN, ELRING, BECK/ARNLEY and 2 other brands. BECK/ARNLEY 0160116 carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2018 Toyota Camry come from 6 brands — DORMAN, ULTRA-POWER, APEX and 3 other brands. The "Popular" part is DORMAN 095156. 4 parts fit every engine; the other 2 are engine-specific.

This group includes DORMAN 095156 and APEX ADP1902 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2018 Toyota Camry, from CALORSTAT, DORMAN, GATES and 1 other brand. All of them fit every engine offered in the 2018 Camry.

Part numbers include CALORSTAT OC2312, DORMAN 84111 and GATES 31285, among others listed above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

37 Oil Filter parts are listed for the 2018 Toyota Camry, from VARIOUS MFR, WIX, PRO-TEC and 13 other brands. PRO-TEC PXL57047 carries the "Popular" badge. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 18 parts.

This table covers the Oil Filter covers. Read more

6 Oil Filter Cover parts for the 2018 Toyota Camry come from 5 brands — MOTORAD, DORMAN, SKP and 2 other brands. The "Popular" part is DORMAN 917016.

Part numbers include DORMAN 917016, SKP SK917016 and AUTOTECNICA TY1420831, among others listed above.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Oil Level Sensor parts are listed for the 2018 Toyota Camry, from STANDARD MOTOR PRODUCTS and VEMO.

Part numbers include STANDARD MOTOR PRODUCTS FLS359, STANDARD MOTOR PRODUCTS FLS360 and VEMO V70720483.