2025 Toyota Camry Engine Parts

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE 55502.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2025 Toyota Camry come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO TO1228320 and TECHPRO TO1228321, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2025 Toyota Camry come from 2 brands — BECK/ARNLEY and MAHLE / CLEVITE.

Part numbers include BECK/ARNLEY 0376251 and MAHLE / CLEVITE MS20603.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2025 Toyota Camry, from MELLING and QUALCAST.

Listed part numbers: MELLING V5832 and QUALCAST 1030532.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Motor Mount parts are listed for the 2025 Toyota Camry, from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR. ANCHOR 10138 carries the "Popular" badge.

Listed part numbers: ANCHOR 10138, ANCHOR 10141 and ANCHOR 10132, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts are listed for the 2025 Toyota Camry, from IDEMITSU, LIQUI MOLY and VALVOLINE. VALVOLINE 907226 carries the "Popular" badge.

In the Full Synthetic grade, IDEMITSU and VALVOLINE supply 3 parts: full-synthetic oils. A representative part number is VALVOLINE 907226.

The High Mileage (>75,000 Miles) section lists 1 option from IDEMITSU — oils grouped for high-mileage engines. IDEMITSU 30015121750 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: VALVOLINE 907226, IDEMITSU 30016050750 and IDEMITSU 30016050953, plus the other parts above.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: BECK/ARNLEY 0396661.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2025 Toyota Camry, from DORMAN and REIN.

Part numbers include DORMAN 090038, DORMAN 090049 and REIN HWU0112.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2025 Toyota Camry, from GATES and MOTORAD.

Part numbers include GATES 31285 and MOTORAD MO155.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts are listed for the 2025 Toyota Camry, from VARIOUS MFR, BOSCH, FRAM and 10 other brands. VARIOUS MFR PG4476 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, BOSCH, FRAM and 2 other brands supply 6 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4476.

In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1103A.

The Standard Replacement section lists 8 options from ACDELCO, BECK/ARNLEY, BOSCH and 5 other brands — built to original-equipment specification. ACDELCO PF1233 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2025 Toyota Camry come from 2 brands — DORMAN and SPECTRA PREMIUM.

This group includes DORMAN 266004 and SPECTRA PREMIUM TOP76A.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts for the 2025 Toyota Camry come from 3 brands — JAPANESE OE, MELLING and PREFERRED COMPONENTS INC.

Part numbers include JAPANESE OE A05079AM, MELLING 1084 and PREFERRED COMPONENTS INC C1254.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts are listed for the 2025 Toyota Camry, from MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING BT7064 and PREFERRED COMPONENTS INC T66361.

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: GATES VVS398.

This table covers the Oil Pump sprockets. Read more

2 Oil Pump Sprocket parts for the 2025 Toyota Camry come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING S1325 and PREFERRED COMPONENTS INC G57020.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 2025 Toyota Camry come from 3 brands — JAPANESE OE, MELLING and PREFERRED COMPONENTS INC.

This group includes JAPANESE OE A05078AM, MELLING 1083 and PREFERRED COMPONENTS INC C10142.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

7 Timing Chain & Component Kit parts are listed for the 2025 Toyota Camry, from PREFERRED COMPONENTS INC, MELLING, ENGINETECH and 2 other brands. ENGINETECH TS108 carries the "Popular" badge.

Economy: 2 parts, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC TS17142.

The Standard Replacement section: 5 options from MELLING, ENGINETECH, INA and 1 other brand. ENGINETECH TS108 is listed in this group.

Listed part numbers: ENGINETECH TS108, PREFERRED COMPONENTS INC TS17142 and PREFERRED COMPONENTS INC TS20142, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts for the 2025 Toyota Camry come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

Part numbers include MELLING BT7063, MELLING BG7049 and PREFERRED COMPONENTS INC R70200, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts are listed for the 2025 Toyota Camry, from MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING BT7062 and PREFERRED COMPONENTS INC T66360.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts are listed for the 2025 Toyota Camry, from MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: MELLING S1323, MELLING S1324 and PREFERRED COMPONENTS INC G50300, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 2025 Toyota Camry, from BECK/ARNLEY and MAHLE / CLEVITE.

This group includes BECK/ARNLEY 0362084, BECK/ARNLEY 0362105 and MAHLE / CLEVITE VS50976.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2025 Toyota Camry come from QUALCAST.

Listed part numbers: QUALCAST 325507 and QUALCAST 325508.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR726.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL1100.