2020 Toyota Yaris Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2020 Toyota Yaris — KING ENGINE BEARINGS CR4349CP.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2020 Toyota Yaris.

Part numbers include AJUSA 54210500 and AJUSA 54317600.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB5394AM.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2020 Toyota Yaris come from 2 brands — AJUSA and ELRING. The "Popular" part is ELRING 332480.

Listed part numbers: ELRING 332480, ELRING 575450 and AJUSA 15099800, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2020 Toyota Yaris, from ELRING and AJUSA.

Part numbers include AJUSA 81081000, ELRING 590440 and ELRING 290390.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2020 Toyota Yaris, from AJUSA, ELRING and APEX. APEX AHG893 carries the "Popular" badge.

Part numbers include APEX AHG893, AJUSA 10224700 and AJUSA 10257600, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts are listed for the 2020 Toyota Yaris, from AJUSA and ELRING.

Part numbers include AJUSA 52592200, AJUSA 52664900 and ELRING 170010, among others listed above.

This table covers the Engine covers. Read more

TECHPRO supplies the 4 Engine Cover parts for the 2020 Toyota Yaris.

This group includes TECHPRO TO1228260, TECHPRO TO1228281 and TECHPRO TO1228251 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2020 Toyota Yaris, from AJUSA and ELRING.

Listed part numbers: AJUSA 50541000, AJUSA 50591100 and ELRING 067590, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2020 Toyota Yaris, from AJUSA, ELRING and FEL-PRO. FEL-PRO MS97638 carries the "Popular" badge.

Part numbers include FEL-PRO MS97638, AJUSA 13230200 and AJUSA 13273000, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2020 Toyota Yaris come from 5 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is ANCHOR 10220.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK10220 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ANCHOR 10220.

Part numbers include ANCHOR 10220, SKP SK10220 and DEA / MARMON RIDE CONTROL A4460, among others listed above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300928.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

26 Oil parts for the 2020 Toyota Yaris come from 4 brands — VALVOLINE, MOBIL, PENTOSIN and 1 other brand. The "Popular" part is MOBIL 124184. Grades run from Full Synthetic through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, PENTOSIN, MOBIL and 1 other brand.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2020 Toyota Yaris come from 2 brands — DORMAN and ELRING.

Part numbers include DORMAN 65237, DORMAN 090089CD and ELRING 587290, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2020 Toyota Yaris, from AJUSA and ELRING.

Listed part numbers: AJUSA 22007000, AJUSA 22023300 and ELRING 473500.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO147.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

25 Oil Filter parts for the 2020 Toyota Yaris come from 16 brands — VARIOUS MFR, WIX, BOSCH and 13 other brands. The "Popular" part is BOSCH 72230WS.

The Economy section: 10 options from VARIOUS MFR, FVP, PRO-TEC and 3 other brands. BOSCH 72230WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 13 parts, from WIX, VARIOUS MFR, BOSCH and 8 other brands. A representative part number is BOSCH 3300.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2020 Toyota Yaris — FEL-PRO 73891.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies the 4 Piston Ring parts for the 2020 Toyota Yaris.

Part numbers include HASTINGS MANUFACTURING 2C5392, HASTINGS MANUFACTURING 2C5392S and HASTINGS MANUFACTURING 2N6272, among others listed above.

This table covers the Thrust washers. Read more

This group shows a single part: KING ENGINE BEARINGS TW185AM.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2020 Toyota Yaris, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 10135, DEA / MARMON RIDE CONTROL A4456 and PIONEER 630135, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2020 Toyota Yaris come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 169780.

Listed part numbers: ELRING 169780, AJUSA 11119100 and AJUSA 11183900, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts for the 2020 Toyota Yaris come from AJUSA.

Listed part numbers: AJUSA 85009300 and AJUSA 85010900.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2020 Toyota Yaris come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 215710.

Listed part numbers: ELRING 215710, AJUSA 57070800 and ELRING 170020, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2020 Toyota Yaris come from 4 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, WALKER PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS VVT246.

The Economy section: 3 options from HOLSTEIN, WALKER PRODUCTS and WELLS. HOLSTEIN 2VTS0448 is listed in this group.

Standard Replacement: 2 parts, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT246.

This group includes STANDARD MOTOR PRODUCTS VVT246, HOLSTEIN 2VTS0448 and WALKER PRODUCTS 5901315 and the remaining parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

2 Variable Valve Timing (VVT) Sprocket parts for the 2020 Toyota Yaris come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

The Economy section: 1 option from DORMAN. DORMAN 916944 is listed in this group.

Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT626.

This group includes DORMAN 916944 and STANDARD MOTOR PRODUCTS VVT626.