2021 Toyota Yaris Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

81 Engine parts are listed for the 2021 Toyota Yaris, in 25 part types, covering both the 1.5L L4 and the 1.6L L3 Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2021 Toyota Yaris, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil Filter (9 parts), Valve Stem Seal (9 parts) and Crankshaft Seal (6 parts). The other 22 part types cover the remaining 57 parts.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.5L L4 CR4349CP
🇲🇽 MX
SetTrimetal
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 54210500
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 54340600
🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.5L L4 MB5394AM
🇲🇽 MX
SetBimetal (Aluminum Base)
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 15105400
🇲🇽 MX
Front43 x 55.5 x 6
Fitment notes — AJUSA 15105400
Front43 x 55.5 x 6ClockwiseEngine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.5L L4 15105500
🇲🇽 MX
RearCounter Clockwise
Fitment notes — AJUSA 15105500
RearCounter ClockwiseEngine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 15121900
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 15092800
🇲🇽 MX
RearCounter Clockwise
View on
Amazon
ELRING Fits: 1.5L L4 066620
🇲🇽 MX
Height [MM]: 7,5Inner Diameter [mm]: 78
Fitment notes — ELRING 066620
Height [MM]: 7,5Inner Diameter [mm]: 78Outer Diameter [mm]: 105,5
Core Model
View on
Amazon
ELRING Fits: 1.5L L4 808860
🇲🇽 MX
Height [MM]: 6Inner Diameter [mm]: 36
Fitment notes — ELRING 808860
Height [MM]: 6Inner Diameter [mm]: 36Material: FPM (Fluoride Rubber)Outer Diameter [mm]: 48Swirl Type: Right-hand Twist
Core Model
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L3 Turbocharged 81087800
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.5L L4 590440
🇲🇽 MX
SetThread Size: M10X1,5x126
Fitment notes — ELRING 590440
SetThread Size: M10X1,5x126
Core Model
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 10224700
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10224700
Multi Layered Steel
76 Bore DiameterEngine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 10276600
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10276600
Multi Layered Steel
88.9 Bore Diameter
View on
Amazon
ELRING Fits: 1.5L L4 067600
🇲🇽 MX
Material: Steel
Fitment notes — ELRING 067600
Material: Steel
Core Model
View on
Amazon
ELRING Fits: 1.6L L3 Turbocharged B20340
🇲🇽 MX
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 52664900
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 52659600
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.5L L4 067900
🇲🇽 MX
Includes Valve Stem Seals
Fitment notes — ELRING 067900
Includes Valve Stem Seals
Core Model
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 50591100
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 50586700
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.5L L4 067590
🇲🇽 MX
with valve stem seals
Fitment notes — ELRING 067590
with valve stem seals
Core Model
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 13273000
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 13348700
🇲🇽 MX
Upper
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 13348800
🇲🇽 MX
Lower
View on
Amazon
ELRING Fits: 1.5L L4 330520
🇲🇽 MX
Material: Metaloseal (VMQ)
Fitment notes — ELRING 330520
Material: Metaloseal (VMQ)
Core Model
View on
Amazon
ELRING Fits: 1.6L L3 Turbocharged B20570
🇲🇽 MX
Material: MVQ (silicone rubber)
View on
Amazon
ELRING Fits: 1.6L L3 Turbocharged B20590
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Motor Mount

Brand Part Number Markets Notes Buy
ANCHOR Fits: 1.5L L4 10220
🇲🇽 MX
RightHydraulic
Fitment notes — ANCHOR 10220
RightHydraulicComplete Assembly
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 1.5L L4 A4460
🇲🇽 MX
Front Right
View on
Amazon
PIONEER Fits: 1.5L L4 610220
🇲🇽 MX
RightComplete Assembly
View on
Amazon
WESTAR Fits: 1.5L L4 EM7594
🇲🇽 MX
Right
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Kit

Brand Part Number Markets Notes Buy
ANCHOR Fits: 1.5L L4 300928
🇲🇽 MX
View on
Amazon

This table covers the Motor Mount kits.

Oil

Full Synthetic

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 1.5L L4 VV935
🇲🇽 MX
Advanced Full Synthetic SAE 10W-301 Quart
View on
Amazon
VALVOLINE Fits: 1.5L L4 881165
🇲🇽 MX
Advanced Full Synthetic SAE 10W-30Easy Pour 5 Quart
View on
Amazon

High Mileage (>75,000 Miles)

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 1.5L L4 881052
🇲🇽 MX
Max Life High Mileage SAE 10W-305 Gallon Bay Box
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.6L L3 Turbocharged 090038
🇲🇽 MX
StandardM12-1.25
Fitment notes — DORMAN 090038
StandardM12-1.25Head Size 14MM
View on
Amazon
DORMAN Fits: 1.6L L3 Turbocharged 090049
🇲🇽 MX
Pilot PointM12-1.25
Fitment notes — DORMAN 090049
Pilot PointM12-1.25Head Size 13MM
View on
Amazon
ELRING Fits: 1.5L L4 587290
🇲🇽 MX
without Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 587290
without Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,25x11
Core Model
View on
Amazon
ELRING Fits: 1.5L L4 952850
🇲🇽 MX
with Seal Ring
Fitment notes — ELRING 952850
with Seal Ring
Core Model
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 22007000
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 22005800
🇲🇽 MX
View on
Amazon
DORMAN Fits: 1.6L L3 Turbocharged 095156
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.5L L4 473500
🇲🇽 MX
Core Model
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: 1.5L L4 PG4612
🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: 1.6L L3 Turbocharged PG4476
🇲🇽 MX
Spin-On
View on
Amazon
VARIOUS MFR Fits: 1.6L L3 Turbocharged PO4476TY2
🇲🇽 MX
OE StyleSpin-On
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: 1.5L L4 M1108A
🇲🇽 MX
Extended Performance
View on
Amazon
MOBIL Fits: 1.6L L3 Turbocharged M1103A
🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HENGST Fits: 1.5L L4 H97W07
🇲🇽 MX
Spin-On
Fitment notes — HENGST H97W07
Spin-On
Spin On
View on
Amazon
MAHLE / CLEVITE Fits: 1.5L L4 OC340
🇲🇽 MX
Filter Thread Size: 3/4"-16UNFSpin-On
View on
Amazon
VARIOUS MFR Fits: 1.5L L4 PG4612EX
🇲🇽 MX
Extended Life
View on
Amazon
VARIOUS MFR Fits: 1.6L L3 Turbocharged PG4476EX
🇲🇽 MX
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 1.5L L4 2N6272
🇲🇽 MX
Full SetFor 2 Ring Piston
Fitment notes — HASTINGS MANUFACTURING 2N6272
Full SetFor 2 Ring PistonNitride Top Ring
Top Ring Surface: Nitride
View on
Amazon
HASTINGS MANUFACTURING Fits: 1.5L L4 2N6272S
🇲🇽 MX
1 Cylinder SetFor 2 Ring Piston
Fitment notes — HASTINGS MANUFACTURING 2N6272S
1 Cylinder SetFor 2 Ring PistonNitride Top Ring
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Thrust Washer

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Fits: 1.5L L4 TW185AM
🇲🇽 MX
Bimetal (Aluminum Base)
Fitment notes — KING ENGINE BEARINGS TW185AM
Bimetal (Aluminum Base)
(Size: Standard)
View on
Amazon

This table covers the Thrust washers.

Torque Strut Mount

Brand Part Number Markets Notes Buy
ANCHOR Fits: 1.5L L4 10135
🇲🇽 MX
Rear Lower
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 1.5L L4 A4456
🇲🇽 MX
Rear
View on
Amazon
PIONEER Fits: 1.5L L4 630135
🇲🇽 MX
Rear
View on
Amazon
WESTAR Fits: 1.5L L4 EM7449
🇲🇽 MX
Rear Lower
View on
Amazon

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Turbocharger Boost Solenoid

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.6L L3 Turbocharged 700513190
🇲🇽 MX
PneumaticElectric-Pneumatic
Fitment notes — PIERBURG 700513190
PneumaticElectric-PneumaticValve Type: Solenoid Valve
From 08/01/2020
View on
Amazon

This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L3 Turbocharged JTC12803
🇲🇽 MX
Mounting Gasket Set
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L3 Turbocharged OP11439
🇲🇽 MX
Supply tube
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 11183900
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 56098200
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.5L L4 316170
🇲🇽 MX
Material: Polyacrylate Rubber (ACM)
Fitment notes — ELRING 316170
Material: Polyacrylate Rubber (ACM)
Core Model
View on
Amazon
ELRING Fits: 1.6L L3 Turbocharged B20500
🇲🇽 MX
Material: ACM (Polyacrylate)
View on
Amazon
ELRING Fits: 1.6L L3 Turbocharged B20710
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.5L L4 85009300
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 85022700
🇲🇽 MX
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 1.5L L4 215420
🇲🇽 MX
Height [MM]: 10Valve Stem Diameter [MM]: 5
Fitment notes — ELRING 215420
Height [MM]: 10Valve Stem Diameter [MM]: 5Valve Type: for Inlet Valves
Core Model
View on
Amazon
ELRING Popular Fits: 1.5L L4 215710
🇲🇽 MX
Set
Fitment notes — ELRING 215710
Set
Core Model
View on
Amazon
AJUSA Fits: 1.5L L4 57070800
🇲🇽 MX
Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.5L L4 12034400
🇲🇽 MX
Intake4.75 x 10.8 x 10.2
Fitment notes — AJUSA 12034400
Intake4.75 x 10.8 x 10.2Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.5L L4 12034500
🇲🇽 MX
Exhaust4.8 x 10.8 x 10.2
Fitment notes — AJUSA 12034500
Exhaust4.8 x 10.8 x 10.2Engine # P5Y4,P5Y6
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 12027100
🇲🇽 MX
Intake4.3 x 10 x 10
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 12036100
🇲🇽 MX
Exhaust4.8 x 10 x 10
View on
Amazon
AJUSA Fits: 1.6L L3 Turbocharged 57098500
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.5L L4 170020
🇲🇽 MX
Outside Diameter: 12.5 mmThickness: 10.0 mm
Fitment notes — ELRING 170020
Outside Diameter: 12.5 mmThickness: 10.0 mmValve Type: for Exhaust Valves
Core Model
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.5L L4 VVT246
🇲🇽 MX
Intake
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 1.5L L4 VVT261
🇲🇽 MX
Exhaust
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Buying Engine Parts for a 2021 Toyota Yaris

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Valve Stem Seal .

Frequently Asked Questions

How many engine parts fit the 2021 Toyota Yaris?

Our catalog currently lists 81 engine parts for the 2021 Toyota Yaris across 25 subcategories and 16 brands, covering both the 1.5L L4 and the 1.6L L3 Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Toyota Yaris engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Toyota Yaris?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2021 Toyota Yaris?

Oil rows on this page include SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Toyota Yaris was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Toyota Yaris?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Toyota Yaris

Engine Parts for Other Toyota Yaris Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.